new file mode 100644
--- /dev/null
+++ b/src/jasper-1-fixes.patch
@@ -0,0 +1,24533 @@
+diff -uNr a/acaux/ltmain.sh b/acaux/ltmain.sh
+--- a/acaux/ltmain.sh	2007-01-19 16:54:42.000000000 -0500
++++ b/acaux/ltmain.sh	2012-06-11 18:20:43.000000000 -0400
+@@ -1,30 +1,130 @@
+-# ltmain.sh - Provide generalized library-building support services.
+-# NOTE: Changing this file will not affect anything until you rerun configure.
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+-# Free Software Foundation, Inc.
+-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-#
+-# This program is free software; you can redistribute it and/or modify
++
++# libtool (GNU libtool) 2.4.2
++# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
++# This is free software; see the source for copying conditions.  There is NO
++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++
++# GNU Libtool is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or
+ # (at your option) any later version.
+ #
+-# This program is distributed in the hope that it will be useful, but
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful, but
+ # WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ # General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++# along with GNU Libtool; see the file COPYING.  If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html,
++# or obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++
++# Usage: $progname [OPTION]... [MODE-ARG]...
++#
++# Provide generalized library-building support services.
+ #
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
++#       --config             show all configuration variables
++#       --debug              enable verbose shell tracing
++#   -n, --dry-run            display commands without modifying any files
++#       --features           display basic configuration information and exit
++#       --mode=MODE          use operation mode MODE
++#       --preserve-dup-deps  don't remove duplicate dependency libraries
++#       --quiet, --silent    don't print informational messages
++#       --no-quiet, --no-silent
++#                            print informational messages (default)
++#       --no-warn            don't display warning messages
++#       --tag=TAG            use configuration variables from tag TAG
++#   -v, --verbose            print more informational messages than default
++#       --no-verbose         don't print the extra informational messages
++#       --version            print version information
++#   -h, --help, --help-all   print short, long, or detailed help message
++#
++# MODE must be one of the following:
++#
++#         clean              remove files from the build directory
++#         compile            compile a source file into a libtool object
++#         execute            automatically set library path, then run a program
++#         finish             complete the installation of libtool libraries
++#         install            install libraries or executables
++#         link               create a library or an executable
++#         uninstall          remove libraries from an installed directory
++#
++# MODE-ARGS vary depending on the MODE.  When passed as first option,
++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
++# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
++#
++# When reporting a bug, please describe a test case to reproduce it and
++# include the following information:
++#
++#         host-triplet:	$host
++#         shell:		$SHELL
++#         compiler:		$LTCC
++#         compiler flags:		$LTCFLAGS
++#         linker:		$LD (gnu? $with_gnu_ld)
++#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.1
++#         automake:	$automake_version
++#         autoconf:	$autoconf_version
++#
++# Report bugs to <bug-libtool@gnu.org>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
++
++PROGRAM=libtool
++PACKAGE=libtool
++VERSION="2.4.2 Debian-2.4.2-1.1"
++TIMESTAMP=""
++package_revision=1.3337
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '${1+"$@"}'='"$@"'
++  setopt NO_GLOB_SUBST
++else
++  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++}
++
++# NLS nuisances: We save the old values to restore during execute mode.
++lt_user_locale=
++lt_safe_locale=
++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++do
++  eval "if test \"\${$lt_var+set}\" = set; then
++          save_$lt_var=\$$lt_var
++          $lt_var=C
++	  export $lt_var
++	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
++	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
++	fi"
++done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
++
++$lt_unset CDPATH
+ 
+-basename="s,^.*/,,g"
+ 
+ # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+ # is ksh but when the shell is invoked as "sh" and the current value of
+@@ -33,123 +133,422 @@
+ # function.
+ progpath="$0"
+ 
+-# The name of this program:
+-progname=`echo "$progpath" | $SED $basename`
+-modename="$progname"
++
++
++: ${CP="cp -f"}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
++: ${MAKE="make"}
++: ${MKDIR="mkdir"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
++: ${Xsed="$SED -e 1s/^X//"}
+ 
+ # Global variables:
+ EXIT_SUCCESS=0
+ EXIT_FAILURE=1
++EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
++EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+ 
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.5.22
+-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
++exit_status=$EXIT_SUCCESS
+ 
+-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+-  emulate sh
+-  NULLCMD=:
+-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+-  # is contrary to our usage.  Disable this feature.
+-  alias -g '${1+"$@"}'='"$@"'
+-  setopt NO_GLOB_SUBST
+-else
+-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+-fi
++# Make sure IFS has a sensible default
++lt_nl='
++'
++IFS=" 	$lt_nl"
+ 
+-# Check that we have a working $echo.
+-if test "X$1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X$1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+-  # Yippee, $echo works!
+-  :
+-else
+-  # Restart under the correct shell, and then maybe $echo will work.
+-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+-fi
++dirname="s,/[^/]*$,,"
++basename="s,^.*/,,"
+ 
+-if test "X$1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<EOF
+-$*
+-EOF
+-  exit $EXIT_SUCCESS
+-fi
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++} # func_dirname may be replaced by extended shell implementation
+ 
+-default_mode=
+-help="Try \`$progname --help' for more information."
+-magic="%%%MAGIC variable%%%"
+-mkdir="mkdir"
+-mv="mv -f"
+-rm="rm -f"
++
++# func_basename file
++func_basename ()
++{
++    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
++# func_dirname_and_basename file append nondir_replacement
++# perform func_basename and func_dirname in a single function
++# call:
++#   dirname:  Compute the dirname of FILE.  If nonempty,
++#             add APPEND to the result, otherwise set result
++#             to NONDIR_REPLACEMENT.
++#             value returned in "$func_dirname_result"
++#   basename: Compute filename of FILE.
++#             value retuned in "$func_basename_result"
++# Implementation must be kept synchronized with func_dirname
++# and func_basename. For efficiency, we do not delegate to
++# those functions but instead duplicate the functionality here.
++func_dirname_and_basename ()
++{
++    # Extract subdirectory from the argument.
++    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
++
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++    case ${2} in
++      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++    esac
++} # func_stripname may be replaced by extended shell implementation
++
++
++# These SED scripts presuppose an absolute path with a trailing slash.
++pathcar='s,^/\([^/]*\).*$,\1,'
++pathcdr='s,^/[^/]*,,'
++removedotparts=':dotsl
++		s@/\./@/@g
++		t dotsl
++		s,/\.$,/,'
++collapseslashes='s@/\{1,\}@/@g'
++finalslash='s,/*$,/,'
++
++# func_normal_abspath PATH
++# Remove doubled-up and trailing slashes, "." path components,
++# and cancel out any ".." path components in PATH after making
++# it an absolute path.
++#             value returned in "$func_normal_abspath_result"
++func_normal_abspath ()
++{
++  # Start from root dir and reassemble the path.
++  func_normal_abspath_result=
++  func_normal_abspath_tpath=$1
++  func_normal_abspath_altnamespace=
++  case $func_normal_abspath_tpath in
++    "")
++      # Empty path, that just means $cwd.
++      func_stripname '' '/' "`pwd`"
++      func_normal_abspath_result=$func_stripname_result
++      return
++    ;;
++    # The next three entries are used to spot a run of precisely
++    # two leading slashes without using negated character classes;
++    # we take advantage of case's first-match behaviour.
++    ///*)
++      # Unusual form of absolute path, do nothing.
++    ;;
++    //*)
++      # Not necessarily an ordinary path; POSIX reserves leading '//'
++      # and for example Cygwin uses it to access remote file shares
++      # over CIFS/SMB, so we conserve a leading double slash if found.
++      func_normal_abspath_altnamespace=/
++    ;;
++    /*)
++      # Absolute path, do nothing.
++    ;;
++    *)
++      # Relative path, prepend $cwd.
++      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
++    ;;
++  esac
++  # Cancel out all the simple stuff to save iterations.  We also want
++  # the path to end with a slash for ease of parsing, so make sure
++  # there is one (and only one) here.
++  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
++  while :; do
++    # Processed it all yet?
++    if test "$func_normal_abspath_tpath" = / ; then
++      # If we ascended to the root using ".." the result may be empty now.
++      if test -z "$func_normal_abspath_result" ; then
++        func_normal_abspath_result=/
++      fi
++      break
++    fi
++    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcar"`
++    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcdr"`
++    # Figure out what to do with it
++    case $func_normal_abspath_tcomponent in
++      "")
++        # Trailing empty path component, ignore it.
++      ;;
++      ..)
++        # Parent dir; strip last assembled component from result.
++        func_dirname "$func_normal_abspath_result"
++        func_normal_abspath_result=$func_dirname_result
++      ;;
++      *)
++        # Actual path component, append it.
++        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
++      ;;
++    esac
++  done
++  # Restore leading double-slash if one was found on entry.
++  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
++}
++
++# func_relative_path SRCDIR DSTDIR
++# generates a relative path from SRCDIR to DSTDIR, with a trailing
++# slash if non-empty, suitable for immediately appending a filename
++# without needing to append a separator.
++#             value returned in "$func_relative_path_result"
++func_relative_path ()
++{
++  func_relative_path_result=
++  func_normal_abspath "$1"
++  func_relative_path_tlibdir=$func_normal_abspath_result
++  func_normal_abspath "$2"
++  func_relative_path_tbindir=$func_normal_abspath_result
++
++  # Ascend the tree starting from libdir
++  while :; do
++    # check if we have found a prefix of bindir
++    case $func_relative_path_tbindir in
++      $func_relative_path_tlibdir)
++        # found an exact match
++        func_relative_path_tcancelled=
++        break
++        ;;
++      $func_relative_path_tlibdir*)
++        # found a matching prefix
++        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
++        func_relative_path_tcancelled=$func_stripname_result
++        if test -z "$func_relative_path_result"; then
++          func_relative_path_result=.
++        fi
++        break
++        ;;
++      *)
++        func_dirname $func_relative_path_tlibdir
++        func_relative_path_tlibdir=${func_dirname_result}
++        if test "x$func_relative_path_tlibdir" = x ; then
++          # Have to descend all the way to the root!
++          func_relative_path_result=../$func_relative_path_result
++          func_relative_path_tcancelled=$func_relative_path_tbindir
++          break
++        fi
++        func_relative_path_result=../$func_relative_path_result
++        ;;
++    esac
++  done
++
++  # Now calculate path; take care to avoid doubling-up slashes.
++  func_stripname '' '/' "$func_relative_path_result"
++  func_relative_path_result=$func_stripname_result
++  func_stripname '/' '/' "$func_relative_path_tcancelled"
++  if test "x$func_stripname_result" != x ; then
++    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
++  fi
++
++  # Normalisation. If bindir is libdir, return empty string,
++  # else relative path ending with a slash; either way, target
++  # file name can be directly appended.
++  if test ! -z "$func_relative_path_result"; then
++    func_stripname './' '' "$func_relative_path_result/"
++    func_relative_path_result=$func_stripname_result
++  fi
++}
++
++# The name of this program:
++func_dirname_and_basename "$progpath"
++progname=$func_basename_result
++
++# Make sure we have an absolute path for reexecution:
++case $progpath in
++  [\\/]*|[A-Za-z]:\\*) ;;
++  *[\\/]*)
++     progdir=$func_dirname_result
++     progdir=`cd "$progdir" && pwd`
++     progpath="$progdir/$progname"
++     ;;
++  *)
++     save_IFS="$IFS"
++     IFS=${PATH_SEPARATOR-:}
++     for progdir in $PATH; do
++       IFS="$save_IFS"
++       test -x "$progdir/$progname" && break
++     done
++     IFS="$save_IFS"
++     test -n "$progdir" || progdir=`pwd`
++     progpath="$progdir/$progname"
++     ;;
++esac
+ 
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+ Xsed="${SED}"' -e 1s/^X//'
+-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-# test EBCDIC or ASCII
+-case `echo X|tr X '\101'` in
+- A) # ASCII based system
+-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+-  SP2NL='tr \040 \012'
+-  NL2SP='tr \015\012 \040\040'
+-  ;;
+- *) # EBCDIC based system
+-  SP2NL='tr \100 \n'
+-  NL2SP='tr \r\n \100\100'
+-  ;;
+-esac
++sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+ 
+-# NLS nuisances.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+-# We save the old values to restore during execute mode.
+-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+-do
+-  eval "if test \"\${$lt_var+set}\" = set; then
+-         save_$lt_var=\$$lt_var
+-         $lt_var=C
+-         export $lt_var
+-       fi"
+-done
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ 
+-# Make sure IFS has a sensible default
+-lt_nl='
+-'
+-IFS=" 	$lt_nl"
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes.  A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
++# Re-`\' parameter expansions in output of double_quote_subst that were
++# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
++# in input to double_quote_subst, that '$' was protected from expansion.
++# Since each input `\' is now two `\'s, look for any number of runs of
++# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
++bs='\\'
++bs2='\\\\'
++bs4='\\\\\\\\'
++dollar='\$'
++sed_double_backslash="\
++  s/$bs4/&\\
++/g
++  s/^$bs2$dollar/$bs&/
++  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
++  s/\n//g"
++
++# Standard options:
++opt_dry_run=false
++opt_help=false
++opt_quiet=false
++opt_verbose=false
++opt_warning=:
++
++# func_echo arg...
++# Echo program name prefixed message, along with the current mode
++# name if it has been set yet.
++func_echo ()
++{
++    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++}
+ 
+-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-  $echo "$modename: not configured to build any kind of library" 1>&2
+-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-  exit $EXIT_FAILURE
+-fi
++# func_verbose arg...
++# Echo program name prefixed message in verbose mode only.
++func_verbose ()
++{
++    $opt_verbose && func_echo ${1+"$@"}
+ 
+-# Global variables.
+-mode=$default_mode
+-nonopt=
+-prev=
+-prevopt=
+-run=
+-show="$echo"
+-show_help=
+-execute_dlfiles=
+-duplicate_deps=no
+-preserve_args=
+-lo2o="s/\\.lo\$/.${objext}/"
+-o2lo="s/\\.${objext}\$/.lo/"
+-extracted_archives=
+-extracted_serial=0
++    # A bug in bash halts the script if the last line of a function
++    # fails when set -e is in force, so we need another command to
++    # work around that:
++    :
++}
++
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*"
++}
++
++# func_error arg...
++# Echo program name prefixed message to standard error.
++func_error ()
++{
++    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++}
++
++# func_warning arg...
++# Echo program name prefixed warning message to standard error.
++func_warning ()
++{
++    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++
++    # bash bug again:
++    :
++}
++
++# func_fatal_error arg...
++# Echo program name prefixed message to standard error, and exit.
++func_fatal_error ()
++{
++    func_error ${1+"$@"}
++    exit $EXIT_FAILURE
++}
++
++# func_fatal_help arg...
++# Echo program name prefixed message to standard error, followed by
++# a help hint, and exit.
++func_fatal_help ()
++{
++    func_error ${1+"$@"}
++    func_fatal_error "$help"
++}
++help="Try \`$progname --help' for more information."  ## default
++
++
++# func_grep expression filename
++# Check whether EXPRESSION matches any line of FILENAME, without output.
++func_grep ()
++{
++    $GREP "$1" "$2" >/dev/null 2>&1
++}
++
++
++# func_mkdir_p directory-path
++# Make sure the entire path to DIRECTORY-PATH is available.
++func_mkdir_p ()
++{
++    my_directory_path="$1"
++    my_dir_list=
++
++    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
++
++      # Protect directory names starting with `-'
++      case $my_directory_path in
++        -*) my_directory_path="./$my_directory_path" ;;
++      esac
++
++      # While some portion of DIR does not yet exist...
++      while test ! -d "$my_directory_path"; do
++        # ...make a list in topmost first order.  Use a colon delimited
++	# list incase some portion of path contains whitespace.
++        my_dir_list="$my_directory_path:$my_dir_list"
++
++        # If the last portion added has no slash in it, the list is done
++        case $my_directory_path in */*) ;; *) break ;; esac
++
++        # ...otherwise throw away the child directory and loop
++        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
++      done
++      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
++
++      save_mkdir_p_IFS="$IFS"; IFS=':'
++      for my_dir in $my_dir_list; do
++	IFS="$save_mkdir_p_IFS"
++        # mkdir can fail with a `File exist' error if two processes
++        # try to create one of the directories concurrently.  Don't
++        # stop in that case!
++        $MKDIR "$my_dir" 2>/dev/null || :
++      done
++      IFS="$save_mkdir_p_IFS"
++
++      # Bail out if we (or some other process) failed to create a directory.
++      test -d "$my_directory_path" || \
++        func_fatal_error "Failed to create \`$1'"
++    fi
++}
+ 
+-#####################################
+-# Shell function definitions:
+-# This seems to be the best place for them
+ 
+ # func_mktempdir [string]
+ # Make a temporary directory that won't clash with other running
+@@ -159,7 +558,7 @@
+ {
+     my_template="${TMPDIR-/tmp}/${1-$progname}"
+ 
+-    if test "$run" = ":"; then
++    if test "$opt_dry_run" = ":"; then
+       # Return a directory name, but don't create it in dry-run mode
+       my_tmpdir="${my_template}-$$"
+     else
+@@ -168,6321 +567,8888 @@
+       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ 
+       if test ! -d "$my_tmpdir"; then
+-	# Failing that, at least try and use $RANDOM to avoid a race
+-	my_tmpdir="${my_template}-${RANDOM-0}$$"
++        # Failing that, at least try and use $RANDOM to avoid a race
++        my_tmpdir="${my_template}-${RANDOM-0}$$"
+ 
+-	save_mktempdir_umask=`umask`
+-	umask 0077
+-	$mkdir "$my_tmpdir"
+-	umask $save_mktempdir_umask
++        save_mktempdir_umask=`umask`
++        umask 0077
++        $MKDIR "$my_tmpdir"
++        umask $save_mktempdir_umask
+       fi
+ 
+       # If we're not in dry-run mode, bomb out on failure
+-      test -d "$my_tmpdir" || {
+-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+-	exit $EXIT_FAILURE
+-      }
++      test -d "$my_tmpdir" || \
++        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+     fi
+ 
+-    $echo "X$my_tmpdir" | $Xsed
++    $ECHO "$my_tmpdir"
+ }
+ 
+ 
+-# func_win32_libid arg
+-# return the library type of file 'arg'
+-#
+-# Need a lot of goo to handle *both* DLLs and import libs
+-# Has to be a shell function in order to 'eat' the argument
+-# that is supplied when $file_magic_command is called.
+-func_win32_libid ()
++# func_quote_for_eval arg
++# Aesthetically quote ARG to be evaled later.
++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
++# is double-quoted, suitable for a subsequent eval, whereas
++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
++# which are still active within double quotes backslashified.
++func_quote_for_eval ()
+ {
+-  win32_libid_type="unknown"
+-  win32_fileres=`file -L $1 2>/dev/null`
+-  case $win32_fileres in
+-  *ar\ archive\ import\ library*) # definitely import
+-    win32_libid_type="x86 archive import"
+-    ;;
+-  *ar\ archive*) # could be an import, or static
+-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+-      win32_nmres=`eval $NM -f posix -A $1 | \
+-	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+-      case $win32_nmres in
+-      import*)  win32_libid_type="x86 archive import";;
+-      *)        win32_libid_type="x86 archive static";;
+-      esac
++    case $1 in
++      *[\\\`\"\$]*)
++	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
++      *)
++        func_quote_for_eval_unquoted_result="$1" ;;
++    esac
++
++    case $func_quote_for_eval_unquoted_result in
++      # Double-quote args containing shell metacharacters to delay
++      # word splitting, command substitution and and variable
++      # expansion for a subsequent eval.
++      # Many Bourne shells cannot handle close brackets correctly
++      # in scan sets, so we specify it separately.
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
++        ;;
++      *)
++        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
++    esac
++}
++
++
++# func_quote_for_expand arg
++# Aesthetically quote ARG to be evaled later; same as above,
++# but do not quote variable references.
++func_quote_for_expand ()
++{
++    case $1 in
++      *[\\\`\"]*)
++	my_arg=`$ECHO "$1" | $SED \
++	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
++      *)
++        my_arg="$1" ;;
++    esac
++
++    case $my_arg in
++      # Double-quote args containing shell metacharacters to delay
++      # word splitting and command substitution for a subsequent eval.
++      # Many Bourne shells cannot handle close brackets correctly
++      # in scan sets, so we specify it separately.
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++        my_arg="\"$my_arg\""
++        ;;
++    esac
++
++    func_quote_for_expand_result="$my_arg"
++}
++
++
++# func_show_eval cmd [fail_exp]
++# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
++# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it.
++func_show_eval ()
++{
++    my_cmd="$1"
++    my_fail_exp="${2-:}"
++
++    ${opt_silent-false} || {
++      func_quote_for_expand "$my_cmd"
++      eval "func_echo $func_quote_for_expand_result"
++    }
++
++    if ${opt_dry_run-false}; then :; else
++      eval "$my_cmd"
++      my_status=$?
++      if test "$my_status" -eq 0; then :; else
++	eval "(exit $my_status); $my_fail_exp"
++      fi
+     fi
++}
++
++
++# func_show_eval_locale cmd [fail_exp]
++# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
++# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it.  Use the saved locale for evaluation.
++func_show_eval_locale ()
++{
++    my_cmd="$1"
++    my_fail_exp="${2-:}"
++
++    ${opt_silent-false} || {
++      func_quote_for_expand "$my_cmd"
++      eval "func_echo $func_quote_for_expand_result"
++    }
++
++    if ${opt_dry_run-false}; then :; else
++      eval "$lt_user_locale
++	    $my_cmd"
++      my_status=$?
++      eval "$lt_safe_locale"
++      if test "$my_status" -eq 0; then :; else
++	eval "(exit $my_status); $my_fail_exp"
++      fi
++    fi
++}
++
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result.  All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++  case $1 in
++  [0-9]* | *[!a-zA-Z0-9_]*)
++    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+     ;;
+-  *DLL*)
+-    win32_libid_type="x86 DLL"
+-    ;;
+-  *executable*) # but shell scripts are "executable" too...
+-    case $win32_fileres in
+-    *MS\ Windows\ PE\ Intel*)
+-      win32_libid_type="x86 DLL"
+-      ;;
+-    esac
++  * )
++    func_tr_sh_result=$1
+     ;;
+   esac
+-  $echo $win32_libid_type
+ }
+ 
+ 
+-# func_infer_tag arg
+-# Infer tagged configuration to use if any are available and
+-# if one wasn't chosen via the "--tag" command line option.
+-# Only attempt this if the compiler in the base compile
+-# command doesn't match the default compiler.
+-# arg is usually of the form 'gcc ...'
+-func_infer_tag ()
++# func_version
++# Echo version message to standard output and exit.
++func_version ()
+ {
+-    if test -n "$available_tags" && test -z "$tagname"; then
+-      CC_quoted=
+-      for arg in $CC; do
+-	case $arg in
+-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+-	CC_quoted="$CC_quoted $arg"
+-      done
+-      case $@ in
+-      # Blanks in the command may have been stripped by the calling shell,
+-      # but not from the CC environment variable when configure was run.
+-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+-      # Blanks at the start of $base_compile will cause this to fail
+-      # if we don't check for them as well.
+-      *)
+-	for z in $available_tags; do
+-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+-	    # Evaluate the configuration.
+-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+-	    CC_quoted=
+-	    for arg in $CC; do
+-	    # Double-quote args containing other shell metacharacters.
+-	    case $arg in
+-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	      arg="\"$arg\""
+-	      ;;
+-	    esac
+-	    CC_quoted="$CC_quoted $arg"
+-	  done
+-	    case "$@ " in
+-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+-	      # The compiler in the base compile command matches
+-	      # the one in the tagged configuration.
+-	      # Assume this is the tagged configuration we want.
+-	      tagname=$z
+-	      break
+-	      ;;
+-	    esac
+-	  fi
+-	done
+-	# If $tagname still isn't set, then no tagged configuration
+-	# was found and let the user know that the "--tag" command
+-	# line option must be used.
+-	if test -z "$tagname"; then
+-	  $echo "$modename: unable to infer tagged configuration"
+-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+-	  exit $EXIT_FAILURE
+-#        else
+-#          $echo "$modename: using $tagname tagged configuration"
+-	fi
+-	;;
+-      esac
+-    fi
+-}
++    $opt_debug
+ 
++    $SED -n '/(C)/!b go
++	:more
++	/\./!{
++	  N
++	  s/\n# / /
++	  b more
++	}
++	:go
++	/^# '$PROGRAM' (GNU /,/# warranty; / {
++        s/^# //
++	s/^# *$//
++        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
++        p
++     }' < "$progpath"
++     exit $?
++}
+ 
+-# func_extract_an_archive dir oldlib
+-func_extract_an_archive ()
++# func_usage
++# Echo short help message to standard output and exit.
++func_usage ()
+ {
+-    f_ex_an_ar_dir="$1"; shift
+-    f_ex_an_ar_oldlib="$1"
++    $opt_debug
+ 
+-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+-     :
+-    else
+-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++    $SED -n '/^# Usage:/,/^#  *.*--help/ {
++        s/^# //
++	s/^# *$//
++	s/\$progname/'$progname'/
++	p
++    }' < "$progpath"
++    echo
++    $ECHO "run \`$progname --help | more' for full usage"
++    exit $?
+ }
+ 
+-# func_extract_archives gentop oldlib ...
+-func_extract_archives ()
++# func_help [NOEXIT]
++# Echo long help message to standard output and exit,
++# unless 'noexit' is passed as argument.
++func_help ()
+ {
+-    my_gentop="$1"; shift
+-    my_oldlibs=${1+"$@"}
+-    my_oldobjs=""
+-    my_xlib=""
+-    my_xabs=""
+-    my_xdir=""
+-    my_status=""
++    $opt_debug
+ 
+-    $show "${rm}r $my_gentop"
+-    $run ${rm}r "$my_gentop"
+-    $show "$mkdir $my_gentop"
+-    $run $mkdir "$my_gentop"
+-    my_status=$?
+-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+-      exit $my_status
++    $SED -n '/^# Usage:/,/# Report bugs to/ {
++	:print
++        s/^# //
++	s/^# *$//
++	s*\$progname*'$progname'*
++	s*\$host*'"$host"'*
++	s*\$SHELL*'"$SHELL"'*
++	s*\$LTCC*'"$LTCC"'*
++	s*\$LTCFLAGS*'"$LTCFLAGS"'*
++	s*\$LD*'"$LD"'*
++	s/\$with_gnu_ld/'"$with_gnu_ld"'/
++	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
++	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
++	p
++	d
++     }
++     /^# .* home page:/b print
++     /^# General help using/b print
++     ' < "$progpath"
++    ret=$?
++    if test -z "$1"; then
++      exit $ret
+     fi
++}
+ 
+-    for my_xlib in $my_oldlibs; do
+-      # Extract the objects.
+-      case $my_xlib in
+-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+-	*) my_xabs=`pwd`"/$my_xlib" ;;
+-      esac
+-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+-      my_xlib_u=$my_xlib
+-      while :; do
+-        case " $extracted_archives " in
+-       *" $my_xlib_u "*)
+-         extracted_serial=`expr $extracted_serial + 1`
+-         my_xlib_u=lt$extracted_serial-$my_xlib ;;
+-       *) break ;;
+-       esac
+-      done
+-      extracted_archives="$extracted_archives $my_xlib_u"
+-      my_xdir="$my_gentop/$my_xlib_u"
++# func_missing_arg argname
++# Echo program name prefixed message to standard error and set global
++# exit_cmd.
++func_missing_arg ()
++{
++    $opt_debug
+ 
+-      $show "${rm}r $my_xdir"
+-      $run ${rm}r "$my_xdir"
+-      $show "$mkdir $my_xdir"
+-      $run $mkdir "$my_xdir"
+-      exit_status=$?
+-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+-	exit $exit_status
+-      fi
+-      case $host in
+-      *-darwin*)
+-	$show "Extracting $my_xabs"
+-	# Do not bother doing anything if just a dry run
+-	if test -z "$run"; then
+-	  darwin_orig_dir=`pwd`
+-	  cd $my_xdir || exit $?
+-	  darwin_archive=$my_xabs
+-	  darwin_curdir=`pwd`
+-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+-	  if test -n "$darwin_arches"; then 
+-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+-	    darwin_arch=
+-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+-	    for darwin_arch in  $darwin_arches ; do
+-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+-	      cd "$darwin_curdir"
+-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+-	    done # $darwin_arches
+-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+-	    darwin_file=
+-	    darwin_files=
+-	    for darwin_file in $darwin_filelist; do
+-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+-	      lipo -create -output "$darwin_file" $darwin_files
+-	    done # $darwin_filelist
+-	    ${rm}r unfat-$$
+-	    cd "$darwin_orig_dir"
+-	  else
+-	    cd "$darwin_orig_dir"
+- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+-	  fi # $darwin_arches
+-	fi # $run
+-	;;
+-      *)
+-        func_extract_an_archive "$my_xdir" "$my_xabs"
+-        ;;
+-      esac
+-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+-    done
+-    func_extract_archives_result="$my_oldobjs"
++    func_error "missing argument for $1."
++    exit_cmd=exit
+ }
+-# End of Shell function definitions
+-#####################################
+ 
+-# Darwin sucks
+-eval std_shrext=\"$shrext_cmds\"
+ 
+-disable_libs=no
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ 
+-# Parse our command line options once, thoroughly.
+-while test "$#" -gt 0
+-do
+-  arg="$1"
+-  shift
++    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
+ 
+-  case $arg in
+-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+-  *) optarg= ;;
+-  esac
+ 
+-  # If the previous option needs an argument, assign it.
+-  if test -n "$prev"; then
+-    case $prev in
+-    execute_dlfiles)
+-      execute_dlfiles="$execute_dlfiles $arg"
+-      ;;
+-    tag)
+-      tagname="$arg"
+-      preserve_args="${preserve_args}=$arg"
+-
+-      # Check whether tagname contains only valid characters
+-      case $tagname in
+-      *[!-_A-Za-z0-9,/]*)
+-	$echo "$progname: invalid tag name: $tagname" 1>&2
+-	exit $EXIT_FAILURE
+-	;;
+-      esac
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++    my_sed_long_arg='1s/^--[^=]*=//'
+ 
+-      case $tagname in
+-      CC)
+-	# Don't test for the "default" C tag, as we know, it's there, but
+-	# not specially marked.
+-	;;
+-      *)
+-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+-	  taglist="$taglist $tagname"
+-	  # Evaluate the configuration.
+-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+-	else
+-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+-	fi
+-	;;
+-      esac
+-      ;;
+-    *)
+-      eval "$prev=\$arg"
+-      ;;
+-    esac
++    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
+ 
+-    prev=
+-    prevopt=
+-    continue
+-  fi
++exit_cmd=:
+ 
+-  # Have we seen a non-optional argument yet?
+-  case $arg in
+-  --help)
+-    show_help=yes
+-    ;;
+ 
+-  --version)
+-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+-    $echo
+-    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
+-    $echo "This is free software; see the source for copying conditions.  There is NO"
+-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+-    exit $?
+-    ;;
+ 
+-  --config)
+-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
++
++
++magic="%%%MAGIC variable%%%"
++magic_exe="%%%MAGIC EXE variable%%%"
++
++# Global variables.
++nonopt=
++preserve_args=
++lo2o="s/\\.lo\$/.${objext}/"
++o2lo="s/\\.${objext}\$/.lo/"
++extracted_archives=
++extracted_serial=0
++
++# If this variable is set in any of the actions, the command in it
++# will be execed at the end.  This prevents here-documents from being
++# left over by shells.
++exec_cmd=
++
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++    eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
++
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++    func_quote_for_eval "${2}"
++    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
++
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++    func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
++# func_fatal_configuration arg...
++# Echo program name prefixed message to standard error, followed by
++# a configuration failure hint, and exit.
++func_fatal_configuration ()
++{
++    func_error ${1+"$@"}
++    func_error "See the $PACKAGE documentation for more information."
++    func_fatal_error "Fatal configuration error."
++}
++
++
++# func_config
++# Display the configuration for all the tags in this script.
++func_config ()
++{
++    re_begincf='^# ### BEGIN LIBTOOL'
++    re_endcf='^# ### END LIBTOOL'
++
++    # Default configuration.
++    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
++
+     # Now print the configurations for the tags.
+     for tagname in $taglist; do
+-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
++      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+     done
+-    exit $?
+-    ;;
+-
+-  --debug)
+-    $echo "$progname: enabling shell trace mode"
+-    set -x
+-    preserve_args="$preserve_args $arg"
+-    ;;
+ 
+-  --dry-run | -n)
+-    run=:
+-    ;;
++    exit $?
++}
+ 
+-  --features)
+-    $echo "host: $host"
++# func_features
++# Display the features supported by this script.
++func_features ()
++{
++    echo "host: $host"
+     if test "$build_libtool_libs" = yes; then
+-      $echo "enable shared libraries"
++      echo "enable shared libraries"
+     else
+-      $echo "disable shared libraries"
++      echo "disable shared libraries"
+     fi
+     if test "$build_old_libs" = yes; then
+-      $echo "enable static libraries"
++      echo "enable static libraries"
+     else
+-      $echo "disable static libraries"
++      echo "disable static libraries"
+     fi
+-    exit $?
+-    ;;
+-
+-  --finish) mode="finish" ;;
+ 
+-  --mode) prevopt="--mode" prev=mode ;;
+-  --mode=*) mode="$optarg" ;;
++    exit $?
++}
+ 
+-  --preserve-dup-deps) duplicate_deps="yes" ;;
++# func_enable_tag tagname
++# Verify that TAGNAME is valid, and either flag an error and exit, or
++# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
++# variable here.
++func_enable_tag ()
++{
++  # Global variable:
++  tagname="$1"
+ 
+-  --quiet | --silent)
+-    show=:
+-    preserve_args="$preserve_args $arg"
+-    ;;
++  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
++  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
++  sed_extractcf="/$re_begincf/,/$re_endcf/p"
++
++  # Validate tagname.
++  case $tagname in
++    *[!-_A-Za-z0-9,/]*)
++      func_fatal_error "invalid tag name: $tagname"
++      ;;
++  esac
+ 
+-  --tag)
+-    prevopt="--tag"
+-    prev=tag
+-    preserve_args="$preserve_args --tag"
+-    ;;
+-  --tag=*)
+-    set tag "$optarg" ${1+"$@"}
+-    shift
+-    prev=tag
+-    preserve_args="$preserve_args --tag"
+-    ;;
++  # Don't test for the "default" C tag, as we know it's
++  # there but not specially marked.
++  case $tagname in
++    CC) ;;
++    *)
++      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
++	taglist="$taglist $tagname"
+ 
+-  -dlopen)
+-    prevopt="-dlopen"
+-    prev=execute_dlfiles
+-    ;;
++	# Evaluate the configuration.  Be careful to quote the path
++	# and the sed script, to avoid splitting on whitespace, but
++	# also don't use non-portable quotes within backquotes within
++	# quotes we have to do it in 2 steps:
++	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
++	eval "$extractedcf"
++      else
++	func_error "ignoring unknown tag $tagname"
++      fi
++      ;;
++  esac
++}
+ 
+-  -*)
+-    $echo "$modename: unrecognized option \`$arg'" 1>&2
+-    $echo "$help" 1>&2
+-    exit $EXIT_FAILURE
+-    ;;
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
++{
++  if test "$package_revision" != "$macro_revision"; then
++    if test "$VERSION" != "$macro_version"; then
++      if test -z "$macro_version"; then
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      else
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      fi
++    else
++      cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++    fi
+ 
+-  *)
+-    nonopt="$arg"
+-    break
+-    ;;
+-  esac
+-done
++    exit $EXIT_MISMATCH
++  fi
++}
+ 
+-if test -n "$prevopt"; then
+-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+-  $echo "$help" 1>&2
+-  exit $EXIT_FAILURE
+-fi
+ 
+-case $disable_libs in
+-no) 
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++  shift; set dummy --mode clean ${1+"$@"}; shift
++  ;;
++compile|compil|compi|comp|com|co|c)
++  shift; set dummy --mode compile ${1+"$@"}; shift
++  ;;
++execute|execut|execu|exec|exe|ex|e)
++  shift; set dummy --mode execute ${1+"$@"}; shift
++  ;;
++finish|finis|fini|fin|fi|f)
++  shift; set dummy --mode finish ${1+"$@"}; shift
+   ;;
+-shared)
+-  build_libtool_libs=no
+-  build_old_libs=yes
++install|instal|insta|inst|ins|in|i)
++  shift; set dummy --mode install ${1+"$@"}; shift
+   ;;
+-static)
+-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++link|lin|li|l)
++  shift; set dummy --mode link ${1+"$@"}; shift
++  ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++  shift; set dummy --mode uninstall ${1+"$@"}; shift
+   ;;
+ esac
+ 
+-# If this variable is set in any of the actions, the command in it
+-# will be execed at the end.  This prevents here-documents from being
+-# left over by shells.
+-exec_cmd=
+ 
+-if test -z "$show_help"; then
+ 
+-  # Infer the operation mode.
+-  if test -z "$mode"; then
+-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+-    case $nonopt in
+-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+-      mode=link
+-      for arg
+-      do
+-	case $arg in
+-	-c)
+-	   mode=compile
+-	   break
+-	   ;;
+-	esac
+-      done
+-      ;;
+-    *db | *dbx | *strace | *truss)
+-      mode=execute
+-      ;;
+-    *install*|cp|mv)
+-      mode=install
+-      ;;
+-    *rm)
+-      mode=uninstall
+-      ;;
+-    *)
+-      # If we have no mode, but dlfiles were specified, then do execute mode.
+-      test -n "$execute_dlfiles" && mode=execute
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_warning=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
+ 
+-      # Just use the default operation mode.
+-      if test -z "$mode"; then
+-	if test -n "$nonopt"; then
+-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+-	else
+-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+-	fi
+-      fi
+-      ;;
++
++# Parse options once, thoroughly.  This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++  # this just eases exit handling
++  while test $# -gt 0; do
++    opt="$1"
++    shift
++    case $opt in
++      --debug|-x)	opt_debug='set -x'
++			func_echo "enabling shell trace mode"
++			$opt_debug
++			;;
++      --dry-run|--dryrun|-n)
++			opt_dry_run=:
++			;;
++      --config)
++			opt_config=:
++func_config
++			;;
++      --dlopen|-dlopen)
++			optarg="$1"
++			opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
++			shift
++			;;
++      --preserve-dup-deps)
++			opt_preserve_dup_deps=:
++			;;
++      --features)
++			opt_features=:
++func_features
++			;;
++      --finish)
++			opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++			;;
++      --help)
++			opt_help=:
++			;;
++      --help-all)
++			opt_help_all=:
++opt_help=': help-all'
++			;;
++      --mode)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_mode="$optarg"
++case $optarg in
++  # Valid mode arguments:
++  clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++  # Catch anything else as an error
++  *) func_error "invalid argument for $opt"
++     exit_cmd=exit
++     break
++     ;;
++esac
++			shift
++			;;
++      --no-silent|--no-quiet)
++			opt_silent=false
++func_append preserve_args " $opt"
++			;;
++      --no-warning|--no-warn)
++			opt_warning=false
++func_append preserve_args " $opt"
++			;;
++      --no-verbose)
++			opt_verbose=false
++func_append preserve_args " $opt"
++			;;
++      --silent|--quiet)
++			opt_silent=:
++func_append preserve_args " $opt"
++        opt_verbose=false
++			;;
++      --verbose|-v)
++			opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++			;;
++      --tag)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
++			shift
++			;;
++
++      -\?|-h)		func_usage				;;
++      --help)		func_help				;;
++      --version)	func_version				;;
++
++      # Separate optargs to long options:
++      --*=*)
++			func_split_long_opt "$opt"
++			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
++			shift
++			;;
++
++      # Separate non-argument short options:
++      -\?*|-h*|-n*|-v*)
++			func_split_short_opt "$opt"
++			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++			shift
++			;;
++
++      --)		break					;;
++      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
++      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+     esac
+-  fi
++  done
+ 
+-  # Only execute mode is allowed to have -dlopen flags.
+-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+-    $echo "$help" 1>&2
+-    exit $EXIT_FAILURE
++  # Validate options:
++
++  # save first non-option argument
++  if test "$#" -gt 0; then
++    nonopt="$opt"
++    shift
+   fi
+ 
+-  # Change the help message to a mode-specific one.
+-  generic_help="$help"
+-  help="Try \`$modename --help --mode=$mode' for more information."
+-
+-  # These modes are in order of execution frequency so that they run quickly.
+-  case $mode in
+-  # libtool compile mode
+-  compile)
+-    modename="$modename: compile"
+-    # Get the compilation command and the source file.
+-    base_compile=
+-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+-    suppress_opt=yes
+-    suppress_output=
+-    arg_mode=normal
+-    libobj=
+-    later=
+-
+-    for arg
+-    do
+-      case $arg_mode in
+-      arg  )
+-	# do not "continue".  Instead, add this to base_compile
+-	lastarg="$arg"
+-	arg_mode=normal
+-	;;
+-
+-      target )
+-	libobj="$arg"
+-	arg_mode=normal
+-	continue
+-	;;
++  # preserve --debug
++  test "$opt_debug" = : || func_append preserve_args " --debug"
+ 
+-      normal )
+-	# Accept any command-line options.
+-	case $arg in
+-	-o)
+-	  if test -n "$libobj" ; then
+-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  arg_mode=target
+-	  continue
+-	  ;;
++  case $host in
++    *cygwin* | *mingw* | *pw32* | *cegcc*)
++      # don't eliminate duplications in $postdeps and $predeps
++      opt_duplicate_compiler_generated_deps=:
++      ;;
++    *)
++      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
++      ;;
++  esac
+ 
+-	-static | -prefer-pic | -prefer-non-pic)
+-	  later="$later $arg"
+-	  continue
+-	  ;;
++  $opt_help || {
++    # Sanity checks first:
++    func_check_version_match
+ 
+-	-no-suppress)
+-	  suppress_opt=no
+-	  continue
+-	  ;;
++    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++      func_fatal_configuration "not configured to build any kind of library"
++    fi
+ 
+-	-Xcompiler)
+-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+-	  continue      #  The current "srcfile" will either be retained or
+-	  ;;            #  replaced later.  I would guess that would be a bug.
++    # Darwin sucks
++    eval std_shrext=\"$shrext_cmds\"
+ 
+-	-Wc,*)
+-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+-	  lastarg=
+-	  save_ifs="$IFS"; IFS=','
+- 	  for arg in $args; do
+-	    IFS="$save_ifs"
++    # Only execute mode is allowed to have -dlopen flags.
++    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++      func_error "unrecognized option \`-dlopen'"
++      $ECHO "$help" 1>&2
++      exit $EXIT_FAILURE
++    fi
+ 
+-	    # Double-quote args containing other shell metacharacters.
+-	    # Many Bourne shells cannot handle close brackets correctly
+-	    # in scan sets, so we specify it separately.
+-	    case $arg in
+-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	      arg="\"$arg\""
+-	      ;;
+-	    esac
+-	    lastarg="$lastarg $arg"
+-	  done
+-	  IFS="$save_ifs"
+-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++    # Change the help message to a mode-specific one.
++    generic_help="$help"
++    help="Try \`$progname --help --mode=$opt_mode' for more information."
++  }
+ 
+-	  # Add the arguments to base_compile.
+-	  base_compile="$base_compile $lastarg"
+-	  continue
+-	  ;;
+ 
+-	* )
+-	  # Accept the current argument as the source file.
+-	  # The previous "srcfile" becomes the current argument.
+-	  #
+-	  lastarg="$srcfile"
+-	  srcfile="$arg"
+-	  ;;
+-	esac  #  case $arg
+-	;;
+-      esac    #  case $arg_mode
++  # Bail if the options were screwed
++  $exit_cmd $EXIT_FAILURE
++}
+ 
+-      # Aesthetically quote the previous argument.
+-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+ 
+-      case $lastarg in
+-      # Double-quote args containing other shell metacharacters.
+-      # Many Bourne shells cannot handle close brackets correctly
+-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+-      # in scan sets (worked around with variable expansion),
+-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+-      # at all, so we specify them separately.
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	lastarg="\"$lastarg\""
+-	;;
+-      esac
+ 
+-      base_compile="$base_compile $lastarg"
+-    done # for arg
+ 
+-    case $arg_mode in
+-    arg)
+-      $echo "$modename: you must specify an argument for -Xcompile"
+-      exit $EXIT_FAILURE
+-      ;;
+-    target)
+-      $echo "$modename: you must specify a target with \`-o'" 1>&2
+-      exit $EXIT_FAILURE
+-      ;;
+-    *)
+-      # Get the name of the library object.
+-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+-      ;;
+-    esac
++## ----------- ##
++##    Main.    ##
++## ----------- ##
++
++# func_lalib_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_lalib_p ()
++{
++    test -f "$1" &&
++      $SED -e 4q "$1" 2>/dev/null \
++        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
++}
+ 
+-    # Recognize several different file suffixes.
+-    # If the user specifies -o file.o, it is replaced with file.lo
+-    xform='[cCFSifmso]'
+-    case $libobj in
+-    *.ada) xform=ada ;;
+-    *.adb) xform=adb ;;
+-    *.ads) xform=ads ;;
+-    *.asm) xform=asm ;;
+-    *.c++) xform=c++ ;;
+-    *.cc) xform=cc ;;
+-    *.ii) xform=ii ;;
+-    *.class) xform=class ;;
+-    *.cpp) xform=cpp ;;
+-    *.cxx) xform=cxx ;;
+-    *.f90) xform=f90 ;;
+-    *.for) xform=for ;;
+-    *.java) xform=java ;;
+-    *.obj) xform=obj ;;
+-    esac
++# func_lalib_unsafe_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function implements the same check as func_lalib_p without
++# resorting to external programs.  To this end, it redirects stdin and
++# closes it afterwards, without saving the original file descriptor.
++# As a safety measure, use it only where a negative result would be
++# fatal anyway.  Works if `file' does not exist.
++func_lalib_unsafe_p ()
++{
++    lalib_p=no
++    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
++	for lalib_p_l in 1 2 3 4
++	do
++	    read lalib_p_line
++	    case "$lalib_p_line" in
++		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
++	    esac
++	done
++	exec 0<&5 5<&-
++    fi
++    test "$lalib_p" = yes
++}
+ 
+-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
++# func_ltwrapper_script_p file
++# True iff FILE is a libtool wrapper script
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_script_p ()
++{
++    func_lalib_p "$1"
++}
+ 
+-    case $libobj in
+-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+-    *)
+-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+-      exit $EXIT_FAILURE
+-      ;;
++# func_ltwrapper_executable_p file
++# True iff FILE is a libtool wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_executable_p ()
++{
++    func_ltwrapper_exec_suffix=
++    case $1 in
++    *.exe) ;;
++    *) func_ltwrapper_exec_suffix=.exe ;;
+     esac
++    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
++}
+ 
+-    func_infer_tag $base_compile
++# func_ltwrapper_scriptname file
++# Assumes file is an ltwrapper_executable
++# uses $file to determine the appropriate filename for a
++# temporary ltwrapper_script.
++func_ltwrapper_scriptname ()
++{
++    func_dirname_and_basename "$1" "" "."
++    func_stripname '' '.exe' "$func_basename_result"
++    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
++}
+ 
+-    for arg in $later; do
+-      case $arg in
+-      -static)
+-	build_old_libs=yes
+-	continue
+-	;;
++# func_ltwrapper_p file
++# True iff FILE is a libtool wrapper script or wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_p ()
++{
++    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
++}
+ 
+-      -prefer-pic)
+-	pic_mode=yes
+-	continue
+-	;;
+ 
+-      -prefer-non-pic)
+-	pic_mode=no
+-	continue
+-	;;
+-      esac
++# func_execute_cmds commands fail_cmd
++# Execute tilde-delimited COMMANDS.
++# If FAIL_CMD is given, eval that upon failure.
++# FAIL_CMD may read-access the current command in variable CMD!
++func_execute_cmds ()
++{
++    $opt_debug
++    save_ifs=$IFS; IFS='~'
++    for cmd in $1; do
++      IFS=$save_ifs
++      eval cmd=\"$cmd\"
++      func_show_eval "$cmd" "${2-:}"
+     done
++    IFS=$save_ifs
++}
+ 
+-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+-    case $qlibobj in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	qlibobj="\"$qlibobj\"" ;;
+-    esac
+-    test "X$libobj" != "X$qlibobj" \
+-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+-    if test "X$xdir" = "X$obj"; then
+-      xdir=
+-    else
+-      xdir=$xdir/
+-    fi
+-    lobj=${xdir}$objdir/$objname
+ 
+-    if test -z "$base_compile"; then
+-      $echo "$modename: you must specify a compilation command" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++# func_source file
++# Source FILE, adding directory component if necessary.
++# Note that it is not necessary on cygwin/mingw to append a dot to
++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
++# behavior happens only for exec(3), not for open(2)!  Also, sourcing
++# `FILE.' does not work on cygwin managed mounts.
++func_source ()
++{
++    $opt_debug
++    case $1 in
++    */* | *\\*)	. "$1" ;;
++    *)		. "./$1" ;;
++    esac
++}
+ 
+-    # Delete any leftover library objects.
+-    if test "$build_old_libs" = yes; then
+-      removelist="$obj $lobj $libobj ${libobj}T"
+-    else
+-      removelist="$lobj $libobj ${libobj}T"
+-    fi
+ 
+-    $run $rm $removelist
+-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot.  Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++  func_resolve_sysroot_result=$1
++  case $func_resolve_sysroot_result in
++  =*)
++    func_stripname '=' '' "$func_resolve_sysroot_result"
++    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++    ;;
++  esac
++}
+ 
+-    # On Cygwin there's no "real" PIC flag so we must build both object types
+-    case $host_os in
+-    cygwin* | mingw* | pw32* | os2*)
+-      pic_mode=default
+-      ;;
+-    esac
+-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+-      # non-PIC code in shared libraries is not supported
+-      pic_mode=default
+-    fi
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++  case "$lt_sysroot:$1" in
++  ?*:"$lt_sysroot"*)
++    func_stripname "$lt_sysroot" '' "$1"
++    func_replace_sysroot_result="=$func_stripname_result"
++    ;;
++  *)
++    # Including no sysroot.
++    func_replace_sysroot_result=$1
++    ;;
++  esac
++}
+ 
+-    # Calculate the filename of the output object if compiler does
+-    # not support -o with -c
+-    if test "$compiler_c_o" = no; then
+-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+-      lockfile="$output_obj.lock"
+-      removelist="$removelist $output_obj $lockfile"
+-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+-    else
+-      output_obj=
+-      need_locks=no
+-      lockfile=
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++    $opt_debug
++    if test -n "$available_tags" && test -z "$tagname"; then
++      CC_quoted=
++      for arg in $CC; do
++	func_append_quoted CC_quoted "$arg"
++      done
++      CC_expanded=`func_echo_all $CC`
++      CC_quoted_expanded=`func_echo_all $CC_quoted`
++      case $@ in
++      # Blanks in the command may have been stripped by the calling shell,
++      # but not from the CC environment variable when configure was run.
++      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
++      # Blanks at the start of $base_compile will cause this to fail
++      # if we don't check for them as well.
++      *)
++	for z in $available_tags; do
++	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++	    # Evaluate the configuration.
++	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++	    CC_quoted=
++	    for arg in $CC; do
++	      # Double-quote args containing other shell metacharacters.
++	      func_append_quoted CC_quoted "$arg"
++	    done
++	    CC_expanded=`func_echo_all $CC`
++	    CC_quoted_expanded=`func_echo_all $CC_quoted`
++	    case "$@ " in
++	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
++	      # The compiler in the base compile command matches
++	      # the one in the tagged configuration.
++	      # Assume this is the tagged configuration we want.
++	      tagname=$z
++	      break
++	      ;;
++	    esac
++	  fi
++	done
++	# If $tagname still isn't set, then no tagged configuration
++	# was found and let the user know that the "--tag" command
++	# line option must be used.
++	if test -z "$tagname"; then
++	  func_echo "unable to infer tagged configuration"
++	  func_fatal_error "specify a tag with \`--tag'"
++#	else
++#	  func_verbose "using $tagname tagged configuration"
++	fi
++	;;
++      esac
+     fi
++}
+ 
+-    # Lock this critical section if it is needed
+-    # We use this script file to make the link, it avoids creating a new file
+-    if test "$need_locks" = yes; then
+-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+-	$show "Waiting for $lockfile to be removed"
+-	sleep 2
+-      done
+-    elif test "$need_locks" = warn; then
+-      if test -f "$lockfile"; then
+-	$echo "\
+-*** ERROR, $lockfile exists and contains:
+-`cat $lockfile 2>/dev/null`
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+ 
+-	$run $rm $removelist
+-	exit $EXIT_FAILURE
+-      fi
+-      $echo "$srcfile" > "$lockfile"
++# func_write_libtool_object output_name pic_name nonpic_name
++# Create a libtool object file (analogous to a ".la" file),
++# but don't create it if we're doing a dry run.
++func_write_libtool_object ()
++{
++    write_libobj=${1}
++    if test "$build_libtool_libs" = yes; then
++      write_lobj=\'${2}\'
++    else
++      write_lobj=none
+     fi
+ 
+-    if test -n "$fix_srcfile_path"; then
+-      eval srcfile=\"$fix_srcfile_path\"
++    if test "$build_old_libs" = yes; then
++      write_oldobj=\'${3}\'
++    else
++      write_oldobj=none
+     fi
+-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+-    case $qsrcfile in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-      qsrcfile="\"$qsrcfile\"" ;;
+-    esac
+ 
+-    $run $rm "$libobj" "${libobj}T"
+-
+-    # Create a libtool object file (analogous to a ".la" file),
+-    # but don't create it if we're doing a dry run.
+-    test -z "$run" && cat > ${libobj}T <<EOF
+-# $libobj - a libtool object file
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++    $opt_dry_run || {
++      cat >${write_libobj}T <<EOF
++# $write_libobj - a libtool object file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ #
+ # Please DO NOT delete this file!
+ # It is necessary for linking the library.
+ 
+ # Name of the PIC object.
+-EOF
++pic_object=$write_lobj
+ 
+-    # Only build a PIC object if we are building libtool libraries.
+-    if test "$build_libtool_libs" = yes; then
+-      # Without this assignment, base_compile gets emptied.
+-      fbsd_hideous_sh_bug=$base_compile
++# Name of the non-PIC object
++non_pic_object=$write_oldobj
+ 
+-      if test "$pic_mode" != no; then
+-	command="$base_compile $qsrcfile $pic_flag"
+-      else
+-	# Don't build PIC code
+-	command="$base_compile $qsrcfile"
+-      fi
++EOF
++      $MV "${write_libobj}T" "${write_libobj}"
++    }
++}
+ 
+-      if test ! -d "${xdir}$objdir"; then
+-	$show "$mkdir ${xdir}$objdir"
+-	$run $mkdir ${xdir}$objdir
+-	exit_status=$?
+-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+-	  exit $exit_status
+-	fi
+-      fi
+ 
+-      if test -z "$output_obj"; then
+-	# Place PIC objects in $objdir
+-	command="$command -o $lobj"
+-      fi
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++  $opt_debug
++  func_convert_core_file_wine_to_w32_result="$1"
++  if test -n "$1"; then
++    # Unfortunately, winepath does not exit with a non-zero error code, so we
++    # are forced to check the contents of stdout. On the other hand, if the
++    # command is not found, the shell will set an exit code of 127 and print
++    # *an error message* to stdout. So we must check for both error code of
++    # zero AND non-empty stdout, which explains the odd construction:
++    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++        $SED -e "$lt_sed_naive_backslashify"`
++    else
++      func_convert_core_file_wine_to_w32_result=
++    fi
++  fi
++}
++# end: func_convert_core_file_wine_to_w32
+ 
+-      $run $rm "$lobj" "$output_obj"
+ 
+-      $show "$command"
+-      if $run eval "$command"; then :
+-      else
+-	test -n "$output_obj" && $run $rm $removelist
+-	exit $EXIT_FAILURE
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++  $opt_debug
++  # unfortunately, winepath doesn't convert paths, only file names
++  func_convert_core_path_wine_to_w32_result=""
++  if test -n "$1"; then
++    oldIFS=$IFS
++    IFS=:
++    for func_convert_core_path_wine_to_w32_f in $1; do
++      IFS=$oldIFS
++      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++        if test -z "$func_convert_core_path_wine_to_w32_result"; then
++          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++        else
++          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++        fi
+       fi
++    done
++    IFS=$oldIFS
++  fi
++}
++# end: func_convert_core_path_wine_to_w32
+ 
+-      if test "$need_locks" = warn &&
+-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+-	$echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
+ 
+-but it should contain:
+-$srcfile
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++  $opt_debug
++  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++    if test "$?" -ne 0; then
++      # on failure, ensure result is empty
++      func_cygpath_result=
++    fi
++  else
++    func_cygpath_result=
++    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++  fi
++}
++#end: func_cygpath
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+ 
+-	$run $rm $removelist
+-	exit $EXIT_FAILURE
+-      fi
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format.  Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++  $opt_debug
++  # awkward: cmd appends spaces to result
++  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
+ 
+-      # Just move the object if needed, then go on to compile the next one
+-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+-	$show "$mv $output_obj $lobj"
+-	if $run $mv $output_obj $lobj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
+ 
+-      # Append the name of the PIC object to the libtool object file.
+-      test -z "$run" && cat >> ${libobj}T <<EOF
+-pic_object='$objdir/$objname'
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++  $opt_debug
++  if test -z "$2" && test -n "$1" ; then
++    func_error "Could not determine host file name corresponding to"
++    func_error "  \`$1'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback:
++    func_to_host_file_result="$1"
++  fi
++}
++# end func_convert_file_check
+ 
+-EOF
+ 
+-      # Allow error messages only from the first compilation.
+-      if test "$suppress_opt" = yes; then
+-        suppress_output=' >/dev/null 2>&1'
+-      fi
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++  $opt_debug
++  if test -z "$4" && test -n "$3"; then
++    func_error "Could not determine the host path corresponding to"
++    func_error "  \`$3'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback.  This is a deliberately simplistic "conversion" and
++    # should not be "improved".  See libtool.info.
++    if test "x$1" != "x$2"; then
++      lt_replace_pathsep_chars="s|$1|$2|g"
++      func_to_host_path_result=`echo "$3" |
++        $SED -e "$lt_replace_pathsep_chars"`
+     else
+-      # No PIC object so indicate it doesn't exist in the libtool
+-      # object file.
+-      test -z "$run" && cat >> ${libobj}T <<EOF
+-pic_object=none
+-
+-EOF
++      func_to_host_path_result="$3"
+     fi
++  fi
++}
++# end func_convert_path_check
+ 
+-    # Only build a position-dependent object if we build old libraries.
+-    if test "$build_old_libs" = yes; then
+-      if test "$pic_mode" != yes; then
+-	# Don't build PIC code
+-	command="$base_compile $qsrcfile"
+-      else
+-	command="$base_compile $qsrcfile $pic_flag"
+-      fi
+-      if test "$compiler_c_o" = yes; then
+-	command="$command -o $obj"
+-      fi
+ 
+-      # Suppress compiler output if we already did a PIC compilation.
+-      command="$command$suppress_output"
+-      $run $rm "$obj" "$output_obj"
+-      $show "$command"
+-      if $run eval "$command"; then :
+-      else
+-	$run $rm $removelist
+-	exit $EXIT_FAILURE
+-      fi
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++  $opt_debug
++  case $4 in
++  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++    ;;
++  esac
++  case $4 in
++  $2 ) func_append func_to_host_path_result "$3"
++    ;;
++  esac
++}
++# end func_convert_path_front_back_pathsep
+ 
+-      if test "$need_locks" = warn &&
+-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+-	$echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
+ 
+-but it should contain:
+-$srcfile
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+ 
+-	$run $rm $removelist
+-	exit $EXIT_FAILURE
+-      fi
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++  $opt_debug
++  $to_host_file_cmd "$1"
++}
++# end func_to_host_file
+ 
+-      # Just move the object if needed
+-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+-	$show "$mv $output_obj $obj"
+-	if $run $mv $output_obj $obj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
+ 
+-      # Append the name of the non-PIC object the libtool object file.
+-      # Only append if the libtool object file exists.
+-      test -z "$run" && cat >> ${libobj}T <<EOF
+-# Name of the non-PIC object.
+-non_pic_object='$objname'
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result.  If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++  $opt_debug
++  case ,$2, in
++    *,"$to_tool_file_cmd",*)
++      func_to_tool_file_result=$1
++      ;;
++    *)
++      $to_tool_file_cmd "$1"
++      func_to_tool_file_result=$func_to_host_file_result
++      ;;
++  esac
++}
++# end func_to_tool_file
+ 
+-EOF
+-    else
+-      # Append the name of the non-PIC object the libtool object file.
+-      # Only append if the libtool object file exists.
+-      test -z "$run" && cat >> ${libobj}T <<EOF
+-# Name of the non-PIC object.
+-non_pic_object=none
+ 
+-EOF
+-    fi
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++  func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
+ 
+-    $run $mv "${libobj}T" "${libobj}"
+ 
+-    # Unlock the critical section if it was locked
+-    if test "$need_locks" != no; then
+-      $run $rm "$lockfile"
+-    fi
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
+ 
+-    exit $EXIT_SUCCESS
+-    ;;
+ 
+-  # libtool link mode
+-  link | relink)
+-    modename="$modename: link"
+-    case $host in
+-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-      # It is impossible to link a dll without this setting, and
+-      # we shouldn't force the makefile maintainer to figure out
+-      # which system we are compiling for in order to pass an extra
+-      # flag for every libtool invocation.
+-      # allow_undefined=no
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++    # LT_CYGPATH in this case.
++    func_to_host_file_result=`cygpath -m "$1"`
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
+ 
+-      # FIXME: Unfortunately, there are problems with the above when trying
+-      # to make a dll which has undefined symbols, in which case not
+-      # even a static library is built.  For now, we need to specify
+-      # -no-undefined on the libtool link line when we can be certain
+-      # that all symbols are satisfied, otherwise we get a static library.
+-      allow_undefined=yes
+-      ;;
+-    *)
+-      allow_undefined=yes
+-      ;;
+-    esac
+-    libtool_args="$nonopt"
+-    base_compile="$nonopt $@"
+-    compile_command="$nonopt"
+-    finalize_command="$nonopt"
+ 
+-    compile_rpath=
+-    finalize_rpath=
+-    compile_shlibpath=
+-    finalize_shlibpath=
+-    convenience=
+-    old_convenience=
+-    deplibs=
+-    old_deplibs=
+-    compiler_flags=
+-    linker_flags=
+-    dllsearchpath=
+-    lib_search_path=`pwd`
+-    inst_prefix_dir=
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format.  Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_file_wine_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
+ 
+-    avoid_version=no
+-    dlfiles=
+-    dlprefiles=
+-    dlself=no
+-    export_dynamic=no
+-    export_symbols=
+-    export_symbols_regex=
+-    generated=
+-    libobjs=
+-    ltlibs=
+-    module=no
+-    no_install=no
+-    objs=
+-    non_pic_objects=
+-    notinst_path= # paths that contain not-installed libtool libraries
+-    precious_files_regex=
+-    prefer_static_libs=no
+-    preload=no
+-    prev=
+-    prevarg=
+-    release=
+-    rpath=
+-    xrpath=
+-    perm_rpath=
+-    temp_rpath=
+-    thread_safe=no
+-    vinfo=
+-    vinfo_number=no
+ 
+-    func_infer_tag $base_compile
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_msys_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
+ 
+-    # We need to know -static, to get the right output filenames.
+-    for arg
+-    do
+-      case $arg in
+-      -all-static | -static | -static-libtool-libs)
+-    case $arg in
+-    -all-static)
+-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+-	  fi
+-	  if test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	  prefer_static_libs=yes
+-	  ;;
+-    -static)
+-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	  prefer_static_libs=built
+-	  ;;
+-    -static-libtool-libs)
+-      if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-        dlopen_self=$dlopen_self_static
+-      fi
+-      prefer_static_libs=yes
+-      ;;
+-    esac
+-	build_libtool_libs=no
+-	build_old_libs=yes
+-	break
+-	;;
+-      esac
+-    done
+ 
+-    # See if our shared archives depend on static archives.
+-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++    func_convert_core_file_wine_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
+ 
+-    # Go through the arguments, transforming them on the way.
+-    while test "$#" -gt 0; do
+-      arg="$1"
+-      shift
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+-	;;
+-      *) qarg=$arg ;;
+-      esac
+-      libtool_args="$libtool_args $qarg"
+ 
+-      # If the previous option needs an argument, assign it.
+-      if test -n "$prev"; then
+-	case $prev in
+-	output)
+-	  compile_command="$compile_command @OUTPUT@"
+-	  finalize_command="$finalize_command @OUTPUT@"
+-	  ;;
+-	esac
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format.  If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++#   file name conversion function    : func_convert_file_X_to_Y ()
++#   path conversion function         : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same.  If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
+ 
+-	case $prev in
+-	dlfiles|dlprefiles)
+-	  if test "$preload" = no; then
+-	    # Add the symbol object into the linking commands.
+-	    compile_command="$compile_command @SYMFILE@"
+-	    finalize_command="$finalize_command @SYMFILE@"
+-	    preload=yes
+-	  fi
+-	  case $arg in
+-	  *.la | *.lo) ;;  # We handle these cases below.
+-	  force)
+-	    if test "$dlself" = no; then
+-	      dlself=needless
+-	      export_dynamic=yes
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  self)
+-	    if test "$prev" = dlprefiles; then
+-	      dlself=yes
+-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+-	      dlself=yes
+-	    else
+-	      dlself=needless
+-	      export_dynamic=yes
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  *)
+-	    if test "$prev" = dlfiles; then
+-	      dlfiles="$dlfiles $arg"
+-	    else
+-	      dlprefiles="$dlprefiles $arg"
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  esac
+-	  ;;
+-	expsyms)
+-	  export_symbols="$arg"
+-	  if test ! -f "$arg"; then
+-	    $echo "$modename: symbol file \`$arg' does not exist"
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  prev=
+-	  continue
+-	  ;;
+-	expsyms_regex)
+-	  export_symbols_regex="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	inst_prefix)
+-	  inst_prefix_dir="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	precious_regex)
+-	  precious_files_regex="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	release)
+-	  release="-$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	objectlist)
+-	  if test -f "$arg"; then
+-	    save_arg=$arg
+-	    moreargs=
+-	    for fil in `cat $save_arg`
+-	    do
+-#	      moreargs="$moreargs $fil"
+-	      arg=$fil
+-	      # A libtool-controlled object.
+ 
+-	      # Check to see that this really is a libtool object.
+-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-		pic_object=
+-		non_pic_object=
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++  $opt_debug
++  if test -z "$to_host_path_cmd"; then
++    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++    to_host_path_cmd="func_convert_path_${func_stripname_result}"
++  fi
++}
+ 
+-		# Read the .lo file
+-		# If there is no directory component, then add one.
+-		case $arg in
+-		*/* | *\\*) . $arg ;;
+-		*) . ./$arg ;;
+-		esac
+ 
+-		if test -z "$pic_object" || \
+-		   test -z "$non_pic_object" ||
+-		   test "$pic_object" = none && \
+-		   test "$non_pic_object" = none; then
+-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+-		  exit $EXIT_FAILURE
+-		fi
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++  $opt_debug
++  func_init_to_host_path_cmd
++  $to_host_path_cmd "$1"
++}
++# end func_to_host_path
+ 
+-		# Extract subdirectory from the argument.
+-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+-		if test "X$xdir" = "X$arg"; then
+-		  xdir=
+-		else
+-		  xdir="$xdir/"
+-		fi
+ 
+-		if test "$pic_object" != none; then
+-		  # Prepend the subdirectory the object is found in.
+-		  pic_object="$xdir$pic_object"
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++  func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
+ 
+-		  if test "$prev" = dlfiles; then
+-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		      dlfiles="$dlfiles $pic_object"
+-		      prev=
+-		      continue
+-		    else
+-		      # If libtool objects are unsupported, then we need to preload.
+-		      prev=dlprefiles
+-		    fi
+-		  fi
+ 
+-		  # CHECK ME:  I think I busted this.  -Ossama
+-		  if test "$prev" = dlprefiles; then
+-		    # Preload the old-style object.
+-		    dlprefiles="$dlprefiles $pic_object"
+-		    prev=
+-		  fi
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from ARG.  MSYS
++    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++    # and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_msys_to_w32
+ 
+-		  # A PIC object.
+-		  libobjs="$libobjs $pic_object"
+-		  arg="$pic_object"
+-		fi
+ 
+-		# Non-PIC object.
+-		if test "$non_pic_object" != none; then
+-		  # Prepend the subdirectory the object is found in.
+-		  non_pic_object="$xdir$non_pic_object"
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_cygwin_to_w32
+ 
+-		  # A standard non-PIC object
+-		  non_pic_objects="$non_pic_objects $non_pic_object"
+-		  if test -z "$pic_object" || test "$pic_object" = none ; then
+-		    arg="$non_pic_object"
+-		  fi
+-		else
+-		  # If the PIC object exists, use it instead.
+-		  # $xdir was prepended to $pic_object above.
+-		  non_pic_object="$pic_object"
+-		  non_pic_objects="$non_pic_objects $non_pic_object"
+-		fi
+-	      else
+-		# Only an error if not doing a dry-run.
+-		if test -z "$run"; then
+-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+-		  exit $EXIT_FAILURE
+-		else
+-		  # Dry-run case.
+ 
+-		  # Extract subdirectory from the argument.
+-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+-		  if test "X$xdir" = "X$arg"; then
+-		    xdir=
+-		  else
+-		    xdir="$xdir/"
+-		  fi
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format.  Requires a wine environment and
++# a working winepath.  Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_nix_to_w32
+ 
+-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+-		  libobjs="$libobjs $pic_object"
+-		  non_pic_objects="$non_pic_objects $non_pic_object"
+-		fi
+-	      fi
+-	    done
+-	  else
+-	    $echo "$modename: link input file \`$save_arg' does not exist"
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  arg=$save_arg
+-	  prev=
+-	  continue
+-	  ;;
+-	rpath | xrpath)
+-	  # We need an absolute path.
+-	  case $arg in
+-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+-	  *)
+-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	    exit $EXIT_FAILURE
+-	    ;;
+-	  esac
+-	  if test "$prev" = rpath; then
+-	    case "$rpath " in
+-	    *" $arg "*) ;;
+-	    *) rpath="$rpath $arg" ;;
+-	    esac
+-	  else
+-	    case "$xrpath " in
+-	    *" $arg "*) ;;
+-	    *) xrpath="$xrpath $arg" ;;
+-	    esac
+-	  fi
+-	  prev=
+-	  continue
+-	  ;;
+-	xcompiler)
+-	  compiler_flags="$compiler_flags $qarg"
+-	  prev=
+-	  compile_command="$compile_command $qarg"
+-	  finalize_command="$finalize_command $qarg"
++
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_msys_to_cygwin
++
++
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from
++    # ARG. msys behavior is inconsistent here, cygpath turns them
++    # into '.;' and ';.', and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
++# func_mode_compile arg...
++func_mode_compile ()
++{
++    $opt_debug
++    # Get the compilation command and the source file.
++    base_compile=
++    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
++    suppress_opt=yes
++    suppress_output=
++    arg_mode=normal
++    libobj=
++    later=
++    pie_flag=
++
++    for arg
++    do
++      case $arg_mode in
++      arg  )
++	# do not "continue".  Instead, add this to base_compile
++	lastarg="$arg"
++	arg_mode=normal
++	;;
++
++      target )
++	libobj="$arg"
++	arg_mode=normal
++	continue
++	;;
++
++      normal )
++	# Accept any command-line options.
++	case $arg in
++	-o)
++	  test -n "$libobj" && \
++	    func_fatal_error "you cannot specify \`-o' more than once"
++	  arg_mode=target
+ 	  continue
+ 	  ;;
+-	xlinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $wl$qarg"
+-	  prev=
+-	  compile_command="$compile_command $wl$qarg"
+-	  finalize_command="$finalize_command $wl$qarg"
++
++	-pie | -fpie | -fPIE)
++          func_append pie_flag " $arg"
+ 	  continue
+ 	  ;;
+-	xcclinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $qarg"
+-	  prev=
+-	  compile_command="$compile_command $qarg"
+-	  finalize_command="$finalize_command $qarg"
++
++	-shared | -static | -prefer-pic | -prefer-non-pic)
++	  func_append later " $arg"
+ 	  continue
+ 	  ;;
+-	shrext)
+-  	  shrext_cmds="$arg"
+-	  prev=
++
++	-no-suppress)
++	  suppress_opt=no
+ 	  continue
+ 	  ;;
+-	darwin_framework|darwin_framework_skip)
+-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+-	  compile_command="$compile_command $arg"
+-	  finalize_command="$finalize_command $arg"
+-	  prev=
++
++	-Xcompiler)
++	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
++	  continue      #  The current "srcfile" will either be retained or
++	  ;;            #  replaced later.  I would guess that would be a bug.
++
++	-Wc,*)
++	  func_stripname '-Wc,' '' "$arg"
++	  args=$func_stripname_result
++	  lastarg=
++	  save_ifs="$IFS"; IFS=','
++	  for arg in $args; do
++	    IFS="$save_ifs"
++	    func_append_quoted lastarg "$arg"
++	  done
++	  IFS="$save_ifs"
++	  func_stripname ' ' '' "$lastarg"
++	  lastarg=$func_stripname_result
++
++	  # Add the arguments to base_compile.
++	  func_append base_compile " $lastarg"
+ 	  continue
+ 	  ;;
++
+ 	*)
+-	  eval "$prev=\"\$arg\""
+-	  prev=
+-	  continue
++	  # Accept the current argument as the source file.
++	  # The previous "srcfile" becomes the current argument.
++	  #
++	  lastarg="$srcfile"
++	  srcfile="$arg"
+ 	  ;;
+-	esac
+-      fi # test -n "$prev"
++	esac  #  case $arg
++	;;
++      esac    #  case $arg_mode
+ 
+-      prevarg="$arg"
++      # Aesthetically quote the previous argument.
++      func_append_quoted base_compile "$lastarg"
++    done # for arg
++
++    case $arg_mode in
++    arg)
++      func_fatal_error "you must specify an argument for -Xcompile"
++      ;;
++    target)
++      func_fatal_error "you must specify a target with \`-o'"
++      ;;
++    *)
++      # Get the name of the library object.
++      test -z "$libobj" && {
++	func_basename "$srcfile"
++	libobj="$func_basename_result"
++      }
++      ;;
++    esac
++
++    # Recognize several different file suffixes.
++    # If the user specifies -o file.o, it is replaced with file.lo
++    case $libobj in
++    *.[cCFSifmso] | \
++    *.ada | *.adb | *.ads | *.asm | \
++    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
++    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
++      func_xform "$libobj"
++      libobj=$func_xform_result
++      ;;
++    esac
++
++    case $libobj in
++    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
++    *)
++      func_fatal_error "cannot determine name of library object from \`$libobj'"
++      ;;
++    esac
+ 
++    func_infer_tag $base_compile
++
++    for arg in $later; do
+       case $arg in
+-      -all-static)
+-	if test -n "$link_static_flag"; then
+-	  compile_command="$compile_command $link_static_flag"
+-	  finalize_command="$finalize_command $link_static_flag"
+-	fi
++      -shared)
++	test "$build_libtool_libs" != yes && \
++	  func_fatal_configuration "can not build a shared library"
++	build_old_libs=no
+ 	continue
+ 	;;
+ 
+-      -allow-undefined)
+-	# FIXME: remove this flag sometime in the future.
+-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
++      -static)
++	build_libtool_libs=no
++	build_old_libs=yes
+ 	continue
+ 	;;
+ 
+-      -avoid-version)
+-	avoid_version=yes
++      -prefer-pic)
++	pic_mode=yes
+ 	continue
+ 	;;
+ 
+-      -dlopen)
+-	prev=dlfiles
++      -prefer-non-pic)
++	pic_mode=no
+ 	continue
+ 	;;
++      esac
++    done
+ 
+-      -dlpreopen)
+-	prev=dlprefiles
+-	continue
+-	;;
++    func_quote_for_eval "$libobj"
++    test "X$libobj" != "X$func_quote_for_eval_result" \
++      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
++      && func_warning "libobj name \`$libobj' may not contain shell special characters."
++    func_dirname_and_basename "$obj" "/" ""
++    objname="$func_basename_result"
++    xdir="$func_dirname_result"
++    lobj=${xdir}$objdir/$objname
+ 
+-      -export-dynamic)
+-	export_dynamic=yes
+-	continue
+-	;;
++    test -z "$base_compile" && \
++      func_fatal_help "you must specify a compilation command"
+ 
+-      -export-symbols | -export-symbols-regex)
+-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+-	  exit $EXIT_FAILURE
+-	fi
+-	if test "X$arg" = "X-export-symbols"; then
+-	  prev=expsyms
+-	else
+-	  prev=expsyms_regex
+-	fi
+-	continue
+-	;;
++    # Delete any leftover library objects.
++    if test "$build_old_libs" = yes; then
++      removelist="$obj $lobj $libobj ${libobj}T"
++    else
++      removelist="$lobj $libobj ${libobj}T"
++    fi
+ 
+-      -framework|-arch|-isysroot)
+-	case " $CC " in
+-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+-		prev=darwin_framework_skip ;;
+-	  *) compiler_flags="$compiler_flags $arg"
+-	     prev=darwin_framework ;;
+-	esac
+-	compile_command="$compile_command $arg"
+-	finalize_command="$finalize_command $arg"
+-	continue
+-	;;
++    # On Cygwin there's no "real" PIC flag so we must build both object types
++    case $host_os in
++    cygwin* | mingw* | pw32* | os2* | cegcc*)
++      pic_mode=default
++      ;;
++    esac
++    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++      # non-PIC code in shared libraries is not supported
++      pic_mode=default
++    fi
+ 
+-      -inst-prefix-dir)
+-	prev=inst_prefix
+-	continue
+-	;;
++    # Calculate the filename of the output object if compiler does
++    # not support -o with -c
++    if test "$compiler_c_o" = no; then
++      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
++      lockfile="$output_obj.lock"
++    else
++      output_obj=
++      need_locks=no
++      lockfile=
++    fi
+ 
+-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+-      # so, if we see these flags be careful not to treat them like -L
+-      -L[A-Z][A-Z]*:*)
+-	case $with_gcc/$host in
+-	no/*-*-irix* | /*-*-irix*)
+-	  compile_command="$compile_command $arg"
+-	  finalize_command="$finalize_command $arg"
+-	  ;;
+-	esac
+-	continue
+-	;;
++    # Lock this critical section if it is needed
++    # We use this script file to make the link, it avoids creating a new file
++    if test "$need_locks" = yes; then
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
++      done
++    elif test "$need_locks" = warn; then
++      if test -f "$lockfile"; then
++	$ECHO "\
++*** ERROR, $lockfile exists and contains:
++`cat $lockfile 2>/dev/null`
+ 
+-      -L*)
+-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+-	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
+-	*)
+-	  absdir=`cd "$dir" && pwd`
+-	  if test -z "$absdir"; then
+-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+-	    absdir="$dir"
+-	    notinst_path="$notinst_path $dir"
+-	  fi
+-	  dir="$absdir"
+-	  ;;
+-	esac
+-	case "$deplibs " in
+-	*" -L$dir "*) ;;
+-	*)
+-	  deplibs="$deplibs -L$dir"
+-	  lib_search_path="$lib_search_path $dir"
+-	  ;;
+-	esac
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+-	  case :$dllsearchpath: in
+-	  *":$dir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$dir";;
+-	  esac
+-	  case :$dllsearchpath: in
+-	  *":$testbindir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+-	  esac
+-	  ;;
+-	esac
+-	continue
+-	;;
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-      -l*)
+-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+-	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+-	    # These systems don't actually have a C or math library (as such)
+-	    continue
+-	    ;;
+-	  *-*-os2*)
+-	    # These systems don't actually have a C library (as such)
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	    # Do not include libc due to us having libc/libc_r.
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  *-*-rhapsody* | *-*-darwin1.[012])
+-	    # Rhapsody C and math libraries are in the System framework
+-	    deplibs="$deplibs -framework System"
+-	    continue
+-	    ;;
+-	  *-*-sco3.2v5* | *-*-sco5v6*)
+-	    # Causes problems with __ctype
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+-	    # Compiler inserts libc in the correct place for threads to work
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  esac
+-	elif test "X$arg" = "X-lc_r"; then
+-	 case $host in
+-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	   # Do not include libc_r directly, use -pthread flag.
+-	   continue
+-	   ;;
+-	 esac
+-	fi
+-	deplibs="$deplibs $arg"
+-	continue
+-	;;
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
++      fi
++      func_append removelist " $output_obj"
++      $ECHO "$srcfile" > "$lockfile"
++    fi
+ 
+-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+-      # classes, name mangling, and exception handling.
+-      -model)
+-	compile_command="$compile_command $arg"
+-	compiler_flags="$compiler_flags $arg"
+-	finalize_command="$finalize_command $arg"
+-	prev=xcompiler
+-	continue
+-	;;
++    $opt_dry_run || $RM $removelist
++    func_append removelist " $lockfile"
++    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
++
++    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++    srcfile=$func_to_tool_file_result
++    func_quote_for_eval "$srcfile"
++    qsrcfile=$func_quote_for_eval_result
+ 
+-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+-	compiler_flags="$compiler_flags $arg"
+-	compile_command="$compile_command $arg"
+-	finalize_command="$finalize_command $arg"
+-	continue
+-	;;
++    # Only build a PIC object if we are building libtool libraries.
++    if test "$build_libtool_libs" = yes; then
++      # Without this assignment, base_compile gets emptied.
++      fbsd_hideous_sh_bug=$base_compile
+ 
+-      -module)
+-	module=yes
+-	continue
+-	;;
++      if test "$pic_mode" != no; then
++	command="$base_compile $qsrcfile $pic_flag"
++      else
++	# Don't build PIC code
++	command="$base_compile $qsrcfile"
++      fi
+ 
+-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+-      # +DA*, +DD* enable 64-bit mode on the HP compiler
+-      # -q* pass through compiler args for the IBM compiler
+-      # -m* pass through architecture-specific compiler args for GCC
+-      # -m*, -t[45]*, -txscale* pass through architecture-specific
+-      # compiler args for GCC
+-      # -pg pass through profiling flag for GCC
+-      # @file GCC response files
+-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+-      -t[45]*|-txscale*|@*)
++      func_mkdir_p "$xdir$objdir"
+ 
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case $arg in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+-        compile_command="$compile_command $arg"
+-        finalize_command="$finalize_command $arg"
+-        compiler_flags="$compiler_flags $arg"
+-        continue
+-        ;;
++      if test -z "$output_obj"; then
++	# Place PIC objects in $objdir
++	func_append command " -o $lobj"
++      fi
+ 
+-      -shrext)
+-	prev=shrext
+-	continue
+-	;;
++      func_show_eval_locale "$command"	\
++          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+ 
+-      -no-fast-install)
+-	fast_install=no
+-	continue
+-	;;
++      if test "$need_locks" = warn &&
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
+ 
+-      -no-install)
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  # The PATH hackery in wrapper scripts is required on Windows
+-	  # in order for the loader to find any dlls it needs.
+-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+-	  fast_install=no
+-	  ;;
+-	*) no_install=yes ;;
+-	esac
+-	continue
+-	;;
++but it should contain:
++$srcfile
+ 
+-      -no-undefined)
+-	allow_undefined=no
+-	continue
+-	;;
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-      -objectlist)
+-	prev=objectlist
+-	continue
+-	;;
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
++      fi
+ 
+-      -o) prev=output ;;
++      # Just move the object if needed, then go on to compile the next one
++      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
++	func_show_eval '$MV "$output_obj" "$lobj"' \
++	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++      fi
+ 
+-      -precious-files-regex)
+-	prev=precious_regex
+-	continue
+-	;;
++      # Allow error messages only from the first compilation.
++      if test "$suppress_opt" = yes; then
++	suppress_output=' >/dev/null 2>&1'
++      fi
++    fi
+ 
+-      -release)
+-	prev=release
+-	continue
+-	;;
++    # Only build a position-dependent object if we build old libraries.
++    if test "$build_old_libs" = yes; then
++      if test "$pic_mode" != yes; then
++	# Don't build PIC code
++	command="$base_compile $qsrcfile$pie_flag"
++      else
++	command="$base_compile $qsrcfile $pic_flag"
++      fi
++      if test "$compiler_c_o" = yes; then
++	func_append command " -o $obj"
++      fi
+ 
+-      -rpath)
+-	prev=rpath
+-	continue
+-	;;
++      # Suppress compiler output if we already did a PIC compilation.
++      func_append command "$suppress_output"
++      func_show_eval_locale "$command" \
++        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+ 
+-      -R)
+-	prev=xrpath
+-	continue
+-	;;
++      if test "$need_locks" = warn &&
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
+ 
+-      -R*)
+-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+-	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
+-	*)
+-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
+-	case "$xrpath " in
+-	*" $dir "*) ;;
+-	*) xrpath="$xrpath $dir" ;;
+-	esac
+-	continue
+-	;;
++but it should contain:
++$srcfile
+ 
+-      -static | -static-libtool-libs)
+-	# The effects of -static are defined in a previous loop.
+-	# We used to do the same as -all-static on platforms that
+-	# didn't have a PIC flag, but the assumption that the effects
+-	# would be equivalent was wrong.  It would break on at least
+-	# Digital Unix and AIX.
+-	continue
+-	;;
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-      -thread-safe)
+-	thread_safe=yes
+-	continue
+-	;;
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
++      fi
+ 
+-      -version-info)
+-	prev=vinfo
+-	continue
+-	;;
+-      -version-number)
+-	prev=vinfo
+-	vinfo_number=yes
+-	continue
+-	;;
++      # Just move the object if needed
++      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
++	func_show_eval '$MV "$output_obj" "$obj"' \
++	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++      fi
++    fi
+ 
+-      -Wc,*)
+-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-	  case $flag in
+-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	    flag="\"$flag\""
+-	    ;;
+-	  esac
+-	  arg="$arg $wl$flag"
+-	  compiler_flags="$compiler_flags $flag"
+-	done
+-	IFS="$save_ifs"
+-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+-	;;
++    $opt_dry_run || {
++      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+ 
+-      -Wl,*)
+-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-	  case $flag in
+-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	    flag="\"$flag\""
+-	    ;;
+-	  esac
+-	  arg="$arg $wl$flag"
+-	  compiler_flags="$compiler_flags $wl$flag"
+-	  linker_flags="$linker_flags $flag"
+-	done
+-	IFS="$save_ifs"
+-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+-	;;
++      # Unlock the critical section if it was locked
++      if test "$need_locks" != no; then
++	removelist=$lockfile
++        $RM "$lockfile"
++      fi
++    }
+ 
+-      -Xcompiler)
+-	prev=xcompiler
+-	continue
+-	;;
++    exit $EXIT_SUCCESS
++}
+ 
+-      -Xlinker)
+-	prev=xlinker
+-	continue
+-	;;
++$opt_help || {
++  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
++}
+ 
+-      -XCClinker)
+-	prev=xcclinker
+-	continue
+-	;;
++func_mode_help ()
++{
++    # We need to display help for each of the modes.
++    case $opt_mode in
++      "")
++        # Generic help is extracted from the usage comments
++        # at the start of this file.
++        func_help
++        ;;
+ 
+-      # Some other compiler flag.
+-      -* | +*)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case $arg in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+-	;;
++      clean)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+ 
+-      *.$objext)
+-	# A standard object.
+-	objs="$objs $arg"
+-	;;
++Remove files from the build directory.
+ 
+-      *.lo)
+-	# A libtool-controlled object.
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
+ 
+-	# Check to see that this really is a libtool object.
+-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  pic_object=
+-	  non_pic_object=
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
++        ;;
+ 
+-	  # Read the .lo file
+-	  # If there is no directory component, then add one.
+-	  case $arg in
+-	  */* | *\\*) . $arg ;;
+-	  *) . ./$arg ;;
+-	  esac
++      compile)
++      $ECHO \
++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+ 
+-	  if test -z "$pic_object" || \
+-	     test -z "$non_pic_object" ||
+-	     test "$pic_object" = none && \
+-	     test "$non_pic_object" = none; then
+-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
++Compile a source file into a libtool library object.
+ 
+-	  # Extract subdirectory from the argument.
+-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+-	  if test "X$xdir" = "X$arg"; then
+-	    xdir=
+- 	  else
+-	    xdir="$xdir/"
+-	  fi
++This mode accepts the following additional options:
+ 
+-	  if test "$pic_object" != none; then
+-	    # Prepend the subdirectory the object is found in.
+-	    pic_object="$xdir$pic_object"
++  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
++  -no-suppress      do not suppress compiler output for multiple passes
++  -prefer-pic       try to build PIC objects only
++  -prefer-non-pic   try to build non-PIC objects only
++  -shared           do not build a \`.o' file suitable for static linking
++  -static           only build a \`.o' file suitable for static linking
++  -Wc,FLAG          pass FLAG directly to the compiler
+ 
+-	    if test "$prev" = dlfiles; then
+-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		dlfiles="$dlfiles $pic_object"
+-		prev=
+-		continue
+-	      else
+-		# If libtool objects are unsupported, then we need to preload.
+-		prev=dlprefiles
+-	      fi
+-	    fi
++COMPILE-COMMAND is a command to be used in creating a \`standard' object file
++from the given SOURCEFILE.
+ 
+-	    # CHECK ME:  I think I busted this.  -Ossama
+-	    if test "$prev" = dlprefiles; then
+-	      # Preload the old-style object.
+-	      dlprefiles="$dlprefiles $pic_object"
+-	      prev=
+-	    fi
++The output file name is determined by removing the directory component from
++SOURCEFILE, then substituting the C source code suffix \`.c' with the
++library object suffix, \`.lo'."
++        ;;
+ 
+-	    # A PIC object.
+-	    libobjs="$libobjs $pic_object"
+-	    arg="$pic_object"
+-	  fi
++      execute)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+ 
+-	  # Non-PIC object.
+-	  if test "$non_pic_object" != none; then
+-	    # Prepend the subdirectory the object is found in.
+-	    non_pic_object="$xdir$non_pic_object"
++Automatically set library path, then run a program.
+ 
+-	    # A standard non-PIC object
+-	    non_pic_objects="$non_pic_objects $non_pic_object"
+-	    if test -z "$pic_object" || test "$pic_object" = none ; then
+-	      arg="$non_pic_object"
+-	    fi
+-	  else
+-	    # If the PIC object exists, use it instead.
+-	    # $xdir was prepended to $pic_object above.
+-	    non_pic_object="$pic_object"
+-	    non_pic_objects="$non_pic_objects $non_pic_object"
+-	  fi
+-	else
+-	  # Only an error if not doing a dry-run.
+-	  if test -z "$run"; then
+-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+-	    exit $EXIT_FAILURE
+-	  else
+-	    # Dry-run case.
++This mode accepts the following additional options:
+ 
+-	    # Extract subdirectory from the argument.
+-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+-	    if test "X$xdir" = "X$arg"; then
+-	      xdir=
+-	    else
+-	      xdir="$xdir/"
+-	    fi
++  -dlopen FILE      add the directory containing FILE to the library path
+ 
+-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+-	    libobjs="$libobjs $pic_object"
+-	    non_pic_objects="$non_pic_objects $non_pic_object"
+-	  fi
+-	fi
+-	;;
++This mode sets the library path environment variable according to \`-dlopen'
++flags.
+ 
+-      *.$libext)
+-	# An archive.
+-	deplibs="$deplibs $arg"
+-	old_deplibs="$old_deplibs $arg"
+-	continue
+-	;;
++If any of the ARGS are libtool executable wrappers, then they are translated
++into their corresponding uninstalled binary, and any of their required library
++directories are added to the library path.
+ 
+-      *.la)
+-	# A libtool-controlled library.
++Then, COMMAND is executed, with ARGS as arguments."
++        ;;
+ 
+-	if test "$prev" = dlfiles; then
+-	  # This library was specified with -dlopen.
+-	  dlfiles="$dlfiles $arg"
+-	  prev=
+-	elif test "$prev" = dlprefiles; then
+-	  # The library was specified with -dlpreopen.
+-	  dlprefiles="$dlprefiles $arg"
+-	  prev=
+-	else
+-	  deplibs="$deplibs $arg"
+-	fi
+-	continue
+-	;;
++      finish)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+ 
+-      # Some other compiler argument.
+-      *)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case $arg in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+-	;;
+-      esac # arg
++Complete the installation of libtool libraries.
+ 
+-      # Now actually substitute the argument into the commands.
+-      if test -n "$arg"; then
+-	compile_command="$compile_command $arg"
+-	finalize_command="$finalize_command $arg"
+-      fi
+-    done # argument parsing loop
++Each LIBDIR is a directory that contains libtool libraries.
+ 
+-    if test -n "$prev"; then
+-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++The commands that this mode executes may require superuser privileges.  Use
++the \`--dry-run' option if you just want to see what would be executed."
++        ;;
+ 
+-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+-      eval arg=\"$export_dynamic_flag_spec\"
+-      compile_command="$compile_command $arg"
+-      finalize_command="$finalize_command $arg"
+-    fi
++      install)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+ 
+-    oldlibs=
+-    # calculate the name of the file, without its directory
+-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+-    libobjs_save="$libobjs"
++Install executables or libraries.
+ 
+-    if test -n "$shlibpath_var"; then
+-      # get the directories listed in $shlibpath_var
+-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+-    else
+-      shlib_search_path=
+-    fi
+-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++INSTALL-COMMAND is the installation command.  The first component should be
++either the \`install' or \`cp' program.
+ 
+-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+-    if test "X$output_objdir" = "X$output"; then
+-      output_objdir="$objdir"
+-    else
+-      output_objdir="$output_objdir/$objdir"
+-    fi
+-    # Create the object directory.
+-    if test ! -d "$output_objdir"; then
+-      $show "$mkdir $output_objdir"
+-      $run $mkdir $output_objdir
+-      exit_status=$?
+-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+-	exit $exit_status
+-      fi
+-    fi
++The following components of INSTALL-COMMAND are treated specially:
+ 
+-    # Determine the type of output
+-    case $output in
+-    "")
+-      $echo "$modename: you must specify an output file" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-      ;;
+-    *.$libext) linkmode=oldlib ;;
+-    *.lo | *.$objext) linkmode=obj ;;
+-    *.la) linkmode=lib ;;
+-    *) linkmode=prog ;; # Anything else should be a program.
+-    esac
++  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+ 
+-    case $host in
+-    *cygwin* | *mingw* | *pw32*)
+-      # don't eliminate duplications in $postdeps and $predeps
+-      duplicate_compiler_generated_deps=yes
+-      ;;
+-    *)
+-      duplicate_compiler_generated_deps=$duplicate_deps
+-      ;;
+-    esac
+-    specialdeplibs=
++The rest of the components are interpreted as arguments to that command (only
++BSD-compatible install options are recognized)."
++        ;;
+ 
+-    libs=
+-    # Find all interdependent deplibs by searching for libraries
+-    # that are linked more than once (e.g. -la -lb -la)
+-    for deplib in $deplibs; do
+-      if test "X$duplicate_deps" = "Xyes" ; then
+-	case "$libs " in
+-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	esac
++      link)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
++
++Link object files or libraries together to form another library, or to
++create an executable program.
++
++LINK-COMMAND is a command using the C compiler that you would use to create
++a program from several object files.
++
++The following components of LINK-COMMAND are treated specially:
++
++  -all-static       do not do any dynamic linking at all
++  -avoid-version    do not add a version suffix if possible
++  -bindir BINDIR    specify path to binaries directory (for systems where
++                    libraries must be found in the PATH setting at runtime)
++  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
++  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
++  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
++  -export-symbols SYMFILE
++                    try to export only the symbols listed in SYMFILE
++  -export-symbols-regex REGEX
++                    try to export only the symbols matching REGEX
++  -LLIBDIR          search LIBDIR for required installed libraries
++  -lNAME            OUTPUT-FILE requires the installed library libNAME
++  -module           build a library that can dlopened
++  -no-fast-install  disable the fast-install mode
++  -no-install       link a not-installable executable
++  -no-undefined     declare that a library does not refer to external symbols
++  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
++  -objectlist FILE  Use a list of object files found in FILE to specify objects
++  -precious-files-regex REGEX
++                    don't remove output files matching REGEX
++  -release RELEASE  specify package release information
++  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
++  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
++  -shared           only do dynamic linking of libtool libraries
++  -shrext SUFFIX    override the standard shared library file extension
++  -static           do not do any dynamic linking of uninstalled libtool libraries
++  -static-libtool-libs
++                    do not do any dynamic linking of libtool libraries
++  -version-info CURRENT[:REVISION[:AGE]]
++                    specify library version info [each variable defaults to 0]
++  -weak LIBNAME     declare that the target provides the LIBNAME interface
++  -Wc,FLAG
++  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
++  -Wl,FLAG
++  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
++  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
++
++All other options (arguments beginning with \`-') are ignored.
++
++Every other argument is treated as a filename.  Files ending in \`.la' are
++treated as uninstalled libtool libraries, other files are standard or library
++object files.
++
++If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
++only library objects (\`.lo' files) may be specified, and \`-rpath' is
++required, except when creating a convenience library.
++
++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
++using \`ar' and \`ranlib', or on Windows using \`lib'.
++
++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
++is created, otherwise an executable program is created."
++        ;;
++
++      uninstall)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++
++Remove libraries from an installation directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, all the files associated with it are deleted.
++Otherwise, only FILE itself is deleted using RM."
++        ;;
++
++      *)
++        func_fatal_help "invalid operation mode \`$opt_mode'"
++        ;;
++    esac
++
++    echo
++    $ECHO "Try \`$progname --help' for more information about other modes."
++}
++
++# Now that we've collected a possible --mode arg, show help if necessary
++if $opt_help; then
++  if test "$opt_help" = :; then
++    func_mode_help
++  else
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	func_mode_help
++      done
++    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	echo
++	func_mode_help
++      done
++    } |
++    sed '1d
++      /^When reporting/,/^Report/{
++	H
++	d
++      }
++      $x
++      /information about other modes/d
++      /more detailed .*MODE/d
++      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
++  fi
++  exit $?
++fi
++
++
++# func_mode_execute arg...
++func_mode_execute ()
++{
++    $opt_debug
++    # The first argument is the command name.
++    cmd="$nonopt"
++    test -z "$cmd" && \
++      func_fatal_help "you must specify a COMMAND"
++
++    # Handle -dlopen flags immediately.
++    for file in $opt_dlopen; do
++      test -f "$file" \
++	|| func_fatal_help "\`$file' is not a file"
++
++      dir=
++      case $file in
++      *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$file" \
++	  || func_fatal_help "\`$lib' is not a valid libtool archive"
++
++	# Read the libtool library.
++	dlname=
++	library_names=
++	func_source "$file"
++
++	# Skip this library if it cannot be dlopened.
++	if test -z "$dlname"; then
++	  # Warn if it was a shared library.
++	  test -n "$library_names" && \
++	    func_warning "\`$file' was not linked with \`-export-dynamic'"
++	  continue
++	fi
++
++	func_dirname "$file" "" "."
++	dir="$func_dirname_result"
++
++	if test -f "$dir/$objdir/$dlname"; then
++	  func_append dir "/$objdir"
++	else
++	  if test ! -f "$dir/$dlname"; then
++	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
++	  fi
++	fi
++	;;
++
++      *.lo)
++	# Just add the directory containing the .lo file.
++	func_dirname "$file" "" "."
++	dir="$func_dirname_result"
++	;;
++
++      *)
++	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
++	continue
++	;;
++      esac
++
++      # Get the absolute pathname.
++      absdir=`cd "$dir" && pwd`
++      test -n "$absdir" && dir="$absdir"
++
++      # Now add the directory to shlibpath_var.
++      if eval "test -z \"\$$shlibpath_var\""; then
++	eval "$shlibpath_var=\"\$dir\""
++      else
++	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+       fi
+-      libs="$libs $deplib"
+     done
+ 
+-    if test "$linkmode" = lib; then
+-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
++    # This variable tells wrapper scripts just to set shlibpath_var
++    # rather than running their programs.
++    libtool_execute_magic="$magic"
+ 
+-      # Compute libraries that are listed more than once in $predeps
+-      # $postdeps and mark them as special (i.e., whose duplicates are
+-      # not to be eliminated).
+-      pre_post_deps=
+-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+-	for pre_post_dep in $predeps $postdeps; do
+-	  case "$pre_post_deps " in
+-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+-	  esac
+-	  pre_post_deps="$pre_post_deps $pre_post_dep"
+-	done
++    # Check if any of the arguments is a wrapper script.
++    args=
++    for file
++    do
++      case $file in
++      -* | *.la | *.lo ) ;;
++      *)
++	# Do a test to see if this is really a libtool program.
++	if func_ltwrapper_script_p "$file"; then
++	  func_source "$file"
++	  # Transform arg to wrapped name.
++	  file="$progdir/$program"
++	elif func_ltwrapper_executable_p "$file"; then
++	  func_ltwrapper_scriptname "$file"
++	  func_source "$func_ltwrapper_scriptname_result"
++	  # Transform arg to wrapped name.
++	  file="$progdir/$program"
++	fi
++	;;
++      esac
++      # Quote arguments (to preserve shell metacharacters).
++      func_append_quoted args "$file"
++    done
++
++    if test "X$opt_dry_run" = Xfalse; then
++      if test -n "$shlibpath_var"; then
++	# Export the shlibpath_var.
++	eval "export $shlibpath_var"
+       fi
+-      pre_post_deps=
++
++      # Restore saved environment variables
++      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++      do
++	eval "if test \"\${save_$lt_var+set}\" = set; then
++                $lt_var=\$save_$lt_var; export $lt_var
++	      else
++		$lt_unset $lt_var
++	      fi"
++      done
++
++      # Now prepare to actually exec the command.
++      exec_cmd="\$cmd$args"
++    else
++      # Display what would be done.
++      if test -n "$shlibpath_var"; then
++	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
++	echo "export $shlibpath_var"
++      fi
++      $ECHO "$cmd$args"
++      exit $EXIT_SUCCESS
+     fi
++}
+ 
+-    deplibs=
+-    newdependency_libs=
+-    newlib_search_path=
+-    need_relink=no # whether we're linking any uninstalled libtool libraries
+-    notinst_deplibs= # not-installed libtool libraries
+-    case $linkmode in
+-    lib)
+-	passes="conv link"
+-	for file in $dlfiles $dlprefiles; do
+-	  case $file in
+-	  *.la) ;;
+-	  *)
+-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+-	    exit $EXIT_FAILURE
+-	    ;;
+-	  esac
+-	done
+-	;;
+-    prog)
+-	compile_deplibs=
+-	finalize_deplibs=
+-	alldeplibs=no
+-	newdlfiles=
+-	newdlprefiles=
+-	passes="conv scan dlopen dlpreopen link"
+-	;;
+-    *)  passes="conv"
+-	;;
+-    esac
+-    for pass in $passes; do
+-      if test "$linkmode,$pass" = "lib,link" ||
+-	 test "$linkmode,$pass" = "prog,scan"; then
+-	libs="$deplibs"
+-	deplibs=
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
++
++
++# func_mode_finish arg...
++func_mode_finish ()
++{
++    $opt_debug
++    libs=
++    libdirs=
++    admincmds=
++
++    for opt in "$nonopt" ${1+"$@"}
++    do
++      if test -d "$opt"; then
++	func_append libdirs " $opt"
++
++      elif test -f "$opt"; then
++	if func_lalib_unsafe_p "$opt"; then
++	  func_append libs " $opt"
++	else
++	  func_warning "\`$opt' is not a valid libtool archive"
++	fi
++
++      else
++	func_fatal_error "invalid argument \`$opt'"
+       fi
+-      if test "$linkmode" = prog; then
+-	case $pass in
+-	dlopen) libs="$dlfiles" ;;
+-	dlpreopen) libs="$dlprefiles" ;;
+-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+-	esac
++    done
++
++    if test -n "$libs"; then
++      if test -n "$lt_sysroot"; then
++        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++      else
++        sysroot_cmd=
+       fi
+-      if test "$pass" = dlopen; then
+-	# Collect dlpreopened libraries
+-	save_deplibs="$deplibs"
+-	deplibs=
++
++      # Remove sysroot references
++      if $opt_dry_run; then
++        for lib in $libs; do
++          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++        done
++      else
++        tmpdir=`func_mktempdir`
++        for lib in $libs; do
++	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++	    > $tmpdir/tmp-la
++	  mv -f $tmpdir/tmp-la $lib
++	done
++        ${RM}r "$tmpdir"
+       fi
+-      for deplib in $libs; do
+-	lib=
+-	found=no
+-	case $deplib in
+-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+-	  if test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$deplib $compile_deplibs"
+-	    finalize_deplibs="$deplib $finalize_deplibs"
+-	  else
+-	    compiler_flags="$compiler_flags $deplib"
+-	  fi
+-	  continue
+-	  ;;
+-	-l*)
+-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+-	    continue
+-	  fi
+-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-	    for search_ext in .la $std_shrext .so .a; do
+-	      # Search the libtool library
+-	      lib="$searchdir/lib${name}${search_ext}"
+-	      if test -f "$lib"; then
+-		if test "$search_ext" = ".la"; then
+-		  found=yes
+-		else
+-		  found=no
+-		fi
+-		break 2
+-	      fi
+-	    done
+-	  done
+-	  if test "$found" != yes; then
+-	    # deplib doesn't seem to be a libtool library
+-	    if test "$linkmode,$pass" = "prog,link"; then
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    else
+-	      deplibs="$deplib $deplibs"
+-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    continue
+-	  else # deplib is a libtool library
+-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+-	    # We need to do some special things here, and not later.
+-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-	      case " $predeps $postdeps " in
+-	      *" $deplib "*)
+-		if (${SED} -e '2q' $lib |
+-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-		  library_names=
+-		  old_library=
+-		  case $lib in
+-		  */* | *\\*) . $lib ;;
+-		  *) . ./$lib ;;
+-		  esac
+-		  for l in $old_library $library_names; do
+-		    ll="$l"
+-		  done
+-		  if test "X$ll" = "X$old_library" ; then # only static version available
+-		    found=no
+-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+-		    test "X$ladir" = "X$lib" && ladir="."
+-		    lib=$ladir/$old_library
+-		    if test "$linkmode,$pass" = "prog,link"; then
+-		      compile_deplibs="$deplib $compile_deplibs"
+-		      finalize_deplibs="$deplib $finalize_deplibs"
+-		    else
+-		      deplibs="$deplib $deplibs"
+-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+-		    fi
+-		    continue
+-		  fi
+-		fi
+-	        ;;
+-	      *) ;;
+-	      esac
+-	    fi
+-	  fi
+-	  ;; # -l
+-	-L*)
+-	  case $linkmode in
+-	  lib)
+-	    deplibs="$deplib $deplibs"
+-	    test "$pass" = conv && continue
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+-	    ;;
+-	  prog)
+-	    if test "$pass" = conv; then
+-	      deplibs="$deplib $deplibs"
+-	      continue
+-	    fi
+-	    if test "$pass" = scan; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+-	    ;;
+-	  *)
+-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+-	    ;;
+-	  esac # linkmode
+-	  continue
+-	  ;; # -L
+-	-R*)
+-	  if test "$pass" = link; then
+-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+-	    # Make sure the xrpath contains only unique directories.
+-	    case "$xrpath " in
+-	    *" $dir "*) ;;
+-	    *) xrpath="$xrpath $dir" ;;
+-	    esac
+-	  fi
+-	  deplibs="$deplib $deplibs"
+-	  continue
+-	  ;;
+-	*.la) lib="$deplib" ;;
+-	*.$libext)
+-	  if test "$pass" = conv; then
+-	    deplibs="$deplib $deplibs"
+-	    continue
+-	  fi
+-	  case $linkmode in
+-	  lib)
+-	    valid_a_lib=no
+-	    case $deplibs_check_method in
+-	      match_pattern*)
+-		set dummy $deplibs_check_method
+-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+-		if eval $echo \"$deplib\" 2>/dev/null \
+-		    | $SED 10q \
+-		    | $EGREP "$match_pattern_regex" > /dev/null; then
+-		  valid_a_lib=yes
+-		fi
+-		;;
+-	      pass_all)
+-		valid_a_lib=yes
+-		;;
+-            esac
+-	    if test "$valid_a_lib" != yes; then
+-	      $echo
+-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+-	      $echo "*** I have the capability to make that library automatically link in when"
+-	      $echo "*** you link to this library.  But I can only do this if you have a"
+-	      $echo "*** shared version of the library, which you do not appear to have"
+-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+-	      $echo "*** that it is just a static archive that I should not used here."
+-	    else
+-	      $echo
+-	      $echo "*** Warning: Linking the shared library $output against the"
+-	      $echo "*** static library $deplib is not portable!"
+-	      deplibs="$deplib $deplibs"
+-	    fi
+-	    continue
+-	    ;;
+-	  prog)
+-	    if test "$pass" != link; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    continue
+-	    ;;
+-	  esac # linkmode
+-	  ;; # *.$libext
+-	*.lo | *.$objext)
+-	  if test "$pass" = conv; then
+-	    deplibs="$deplib $deplibs"
+-	  elif test "$linkmode" = prog; then
+-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+-	      # If there is no dlopen support or we're linking statically,
+-	      # we need to preload.
+-	      newdlprefiles="$newdlprefiles $deplib"
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    else
+-	      newdlfiles="$newdlfiles $deplib"
+-	    fi
+-	  fi
+-	  continue
+-	  ;;
+-	%DEPLIBS%)
+-	  alldeplibs=yes
+-	  continue
+-	  ;;
+-	esac # case $deplib
+-	if test "$found" = yes || test -f "$lib"; then :
+-	else
+-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
++    fi
+ 
+-	# Check to see that this really is a libtool archive.
+-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+-	else
+-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-	  exit $EXIT_FAILURE
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      for libdir in $libdirs; do
++	if test -n "$finish_cmds"; then
++	  # Do each command in the finish commands.
++	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
++'"$cmd"'"'
++	fi
++	if test -n "$finish_eval"; then
++	  # Do the single finish_eval.
++	  eval cmds=\"$finish_eval\"
++	  $opt_dry_run || eval "$cmds" || func_append admincmds "
++       $cmds"
+ 	fi
++      done
++    fi
+ 
+-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$ladir" = "X$lib" && ladir="."
++    # Exit here if they wanted silent mode.
++    $opt_silent && exit $EXIT_SUCCESS
+ 
+-	dlname=
+-	dlopen=
+-	dlpreopen=
+-	libdir=
+-	library_names=
+-	old_library=
+-	# If the library was installed with an old release of libtool,
+-	# it will not redefine variables installed, or shouldnotlink
+-	installed=yes
+-	shouldnotlink=no
+-	avoidtemprpath=
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      echo "----------------------------------------------------------------------"
++      echo "Libraries have been installed in:"
++      for libdir in $libdirs; do
++	$ECHO "   $libdir"
++      done
++      echo
++      echo "If you ever happen to want to link against installed libraries"
++      echo "in a given directory, LIBDIR, you must either use libtool, and"
++      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++      echo "flag during linking and do at least one of the following:"
++      if test -n "$shlibpath_var"; then
++	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
++	echo "     during execution"
++      fi
++      if test -n "$runpath_var"; then
++	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
++	echo "     during linking"
++      fi
++      if test -n "$hardcode_libdir_flag_spec"; then
++	libdir=LIBDIR
++	eval flag=\"$hardcode_libdir_flag_spec\"
+ 
++	$ECHO "   - use the \`$flag' linker flag"
++      fi
++      if test -n "$admincmds"; then
++	$ECHO "   - have your system administrator run these commands:$admincmds"
++      fi
++      if test -f /etc/ld.so.conf; then
++	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++      fi
++      echo
+ 
+-	# Read the .la file
+-	case $lib in
+-	*/* | *\\*) . $lib ;;
+-	*) . ./$lib ;;
+-	esac
++      echo "See any operating system documentation about shared libraries for"
++      case $host in
++	solaris2.[6789]|solaris2.1[0-9])
++	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++	  echo "pages."
++	  ;;
++	*)
++	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
++	  ;;
++      esac
++      echo "----------------------------------------------------------------------"
++    fi
++    exit $EXIT_SUCCESS
++}
+ 
+-	if test "$linkmode,$pass" = "lib,link" ||
+-	   test "$linkmode,$pass" = "prog,scan" ||
+-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+-	fi
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+ 
+-	if test "$pass" = conv; then
+-	  # Only check for convenience libraries
+-	  deplibs="$lib $deplibs"
+-	  if test -z "$libdir"; then
+-	    if test -z "$old_library"; then
+-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+-	      exit $EXIT_FAILURE
+-	    fi
+-	    # It is a libtool convenience library, so add in its objects.
+-	    convenience="$convenience $ladir/$objdir/$old_library"
+-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+-	    tmp_libs=
+-	    for deplib in $dependency_libs; do
+-	      deplibs="$deplib $deplibs"
+-              if test "X$duplicate_deps" = "Xyes" ; then
+-	        case "$tmp_libs " in
+-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	        esac
+-              fi
+-	      tmp_libs="$tmp_libs $deplib"
+-	    done
+-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  continue
+-	fi # $pass = conv
+ 
++# func_mode_install arg...
++func_mode_install ()
++{
++    $opt_debug
++    # There may be an optional sh(1) argument at the beginning of
++    # install_prog (especially on Windows NT).
++    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++       # Allow the use of GNU shtool's install command.
++       case $nonopt in *shtool*) :;; *) false;; esac; then
++      # Aesthetically quote it.
++      func_quote_for_eval "$nonopt"
++      install_prog="$func_quote_for_eval_result "
++      arg=$1
++      shift
++    else
++      install_prog=
++      arg=$nonopt
++    fi
+ 
+-	# Get the name of the library we link against.
+-	linklib=
+-	for l in $old_library $library_names; do
+-	  linklib="$l"
+-	done
+-	if test -z "$linklib"; then
+-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
++    # The real first argument should be the name of the installation program.
++    # Aesthetically quote it.
++    func_quote_for_eval "$arg"
++    func_append install_prog "$func_quote_for_eval_result"
++    install_shared_prog=$install_prog
++    case " $install_prog " in
++      *[\\\ /]cp\ *) install_cp=: ;;
++      *) install_cp=false ;;
++    esac
+ 
+-	# This library was specified with -dlopen.
+-	if test "$pass" = dlopen; then
+-	  if test -z "$libdir"; then
+-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  if test -z "$dlname" ||
+-	     test "$dlopen_support" != yes ||
+-	     test "$build_libtool_libs" = no; then
+-	    # If there is no dlname, no dlopen support or we're linking
+-	    # statically, we need to preload.  We also need to preload any
+-	    # dependent libraries so libltdl's deplib preloader doesn't
+-	    # bomb out in the load deplibs phase.
+-	    dlprefiles="$dlprefiles $lib $dependency_libs"
+-	  else
+-	    newdlfiles="$newdlfiles $lib"
+-	  fi
+-	  continue
+-	fi # $pass = dlopen
++    # We need to accept at least all the BSD install flags.
++    dest=
++    files=
++    opts=
++    prev=
++    install_type=
++    isdir=no
++    stripme=
++    no_mode=:
++    for arg
++    do
++      arg2=
++      if test -n "$dest"; then
++	func_append files " $dest"
++	dest=$arg
++	continue
++      fi
+ 
+-	# We need an absolute path.
+-	case $ladir in
+-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+-	*)
+-	  abs_ladir=`cd "$ladir" && pwd`
+-	  if test -z "$abs_ladir"; then
+-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+-	    abs_ladir="$ladir"
++      case $arg in
++      -d) isdir=yes ;;
++      -f)
++	if $install_cp; then :; else
++	  prev=$arg
++	fi
++	;;
++      -g | -m | -o)
++	prev=$arg
++	;;
++      -s)
++	stripme=" -s"
++	continue
++	;;
++      -*)
++	;;
++      *)
++	# If the previous option needed an argument, then skip it.
++	if test -n "$prev"; then
++	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
++	    arg2=$install_override_mode
++	    no_mode=false
+ 	  fi
++	  prev=
++	else
++	  dest=$arg
++	  continue
++	fi
++	;;
++      esac
++
++      # Aesthetically quote the argument.
++      func_quote_for_eval "$arg"
++      func_append install_prog " $func_quote_for_eval_result"
++      if test -n "$arg2"; then
++	func_quote_for_eval "$arg2"
++      fi
++      func_append install_shared_prog " $func_quote_for_eval_result"
++    done
++
++    test -z "$install_prog" && \
++      func_fatal_help "you must specify an install program"
++
++    test -n "$prev" && \
++      func_fatal_help "the \`$prev' option requires an argument"
++
++    if test -n "$install_override_mode" && $no_mode; then
++      if $install_cp; then :; else
++	func_quote_for_eval "$install_override_mode"
++	func_append install_shared_prog " -m $func_quote_for_eval_result"
++      fi
++    fi
++
++    if test -z "$files"; then
++      if test -z "$dest"; then
++	func_fatal_help "no file or destination specified"
++      else
++	func_fatal_help "you must specify a destination"
++      fi
++    fi
++
++    # Strip any trailing slash from the destination.
++    func_stripname '' '/' "$dest"
++    dest=$func_stripname_result
++
++    # Check to see that the destination is a directory.
++    test -d "$dest" && isdir=yes
++    if test "$isdir" = yes; then
++      destdir="$dest"
++      destname=
++    else
++      func_dirname_and_basename "$dest" "" "."
++      destdir="$func_dirname_result"
++      destname="$func_basename_result"
++
++      # Not a directory, so check to see that there is only one file specified.
++      set dummy $files; shift
++      test "$#" -gt 1 && \
++	func_fatal_help "\`$dest' is not a directory"
++    fi
++    case $destdir in
++    [\\/]* | [A-Za-z]:[\\/]*) ;;
++    *)
++      for file in $files; do
++	case $file in
++	*.lo) ;;
++	*)
++	  func_fatal_help "\`$destdir' must be an absolute directory name"
+ 	  ;;
+ 	esac
+-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++      done
++      ;;
++    esac
+ 
+-	# Find the relevant object directory and library name.
+-	if test "X$installed" = Xyes; then
+-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+-	    dir="$ladir"
+-	    absdir="$abs_ladir"
+-	    libdir="$abs_ladir"
+-	  else
+-	    dir="$libdir"
+-	    absdir="$libdir"
+-	  fi
+-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+-	else
+-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+-	    dir="$ladir"
+-	    absdir="$abs_ladir"
+-	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
+-	  else
+-	    dir="$ladir/$objdir"
+-	    absdir="$abs_ladir/$objdir"
+-	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
+-	  fi
+-	fi # $installed = yes
+-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++    # This variable tells wrapper scripts just to set variables rather
++    # than running their programs.
++    libtool_install_magic="$magic"
+ 
+-	# This library was specified with -dlpreopen.
+-	if test "$pass" = dlpreopen; then
+-	  if test -z "$libdir"; then
+-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
+-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+-	  # are required to link).
+-	  if test -n "$old_library"; then
+-	    newdlprefiles="$newdlprefiles $dir/$old_library"
+-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+-	  elif test -n "$dlname"; then
+-	    newdlprefiles="$newdlprefiles $dir/$dlname"
+-	  else
+-	    newdlprefiles="$newdlprefiles $dir/$linklib"
+-	  fi
+-	fi # $pass = dlpreopen
++    staticlibs=
++    future_libdirs=
++    current_libdirs=
++    for file in $files; do
+ 
+-	if test -z "$libdir"; then
+-	  # Link the convenience library
+-	  if test "$linkmode" = lib; then
+-	    deplibs="$dir/$old_library $deplibs"
+-	  elif test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$dir/$old_library $compile_deplibs"
+-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+-	  else
+-	    deplibs="$lib $deplibs" # used for prog,scan pass
+-	  fi
+-	  continue
++      # Do each installation.
++      case $file in
++      *.$libext)
++	# Do the static libraries later.
++	func_append staticlibs " $file"
++	;;
++
++      *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$file" \
++	  || func_fatal_help "\`$file' is not a valid libtool archive"
++
++	library_names=
++	old_library=
++	relink_command=
++	func_source "$file"
++
++	# Add the libdir to current_libdirs if it is the destination.
++	if test "X$destdir" = "X$libdir"; then
++	  case "$current_libdirs " in
++	  *" $libdir "*) ;;
++	  *) func_append current_libdirs " $libdir" ;;
++	  esac
++	else
++	  # Note the libdir as a future libdir.
++	  case "$future_libdirs " in
++	  *" $libdir "*) ;;
++	  *) func_append future_libdirs " $libdir" ;;
++	  esac
+ 	fi
+ 
++	func_dirname "$file" "/" ""
++	dir="$func_dirname_result"
++	func_append dir "$objdir"
+ 
+-	if test "$linkmode" = prog && test "$pass" != link; then
+-	  newlib_search_path="$newlib_search_path $ladir"
+-	  deplibs="$lib $deplibs"
++	if test -n "$relink_command"; then
++	  # Determine the prefix the user has applied to our future dir.
++	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+ 
+-	  linkalldeplibs=no
+-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+-	     test "$build_libtool_libs" = no; then
+-	    linkalldeplibs=yes
++	  # Don't allow the user to place us outside of our expected
++	  # location b/c this prevents finding dependent libraries that
++	  # are installed to the same prefix.
++	  # At present, this check doesn't affect windows .dll's that
++	  # are installed into $libdir/../bin (currently, that works fine)
++	  # but it's something to keep an eye on.
++	  test "$inst_prefix_dir" = "$destdir" && \
++	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
++
++	  if test -n "$inst_prefix_dir"; then
++	    # Stick the inst_prefix_dir data into the link command.
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	  else
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ 	  fi
+ 
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    case $deplib in
+-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+-	    esac
+-	    # Need to link against all dependency_libs?
+-	    if test "$linkalldeplibs" = yes; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      # Need to hardcode shared library paths
+-	      # or/and link against static libraries
+-	      newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    if test "X$duplicate_deps" = "Xyes" ; then
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
+-	    fi
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done # for deplib
+-	  continue
+-	fi # $linkmode = prog...
++	  func_warning "relinking \`$file'"
++	  func_show_eval "$relink_command" \
++	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
++	fi
+ 
+-	if test "$linkmode,$pass" = "prog,link"; then
+-	  if test -n "$library_names" &&
+-         { { test "$prefer_static_libs" = no ||
+-             test "$prefer_static_libs,$installed" = "built,yes"; } ||
+-           test -z "$old_library"; }; then
+-	    # We need to hardcode the library path
+-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+-	      # Make sure the rpath contains only unique directories.
+-	      case "$temp_rpath " in
+-	      *" $dir "*) ;;
+-	      *" $absdir "*) ;;
+-	      *) temp_rpath="$temp_rpath $absdir" ;;
+-	      esac
+-	    fi
++	# See the names of the shared library.
++	set dummy $library_names; shift
++	if test -n "$1"; then
++	  realname="$1"
++	  shift
+ 
+-	    # Hardcode the library path.
+-	    # Skip directories that are in the system default run-time
+-	    # search path.
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $absdir "*) ;;
+-	    *)
+-	      case "$compile_rpath " in
+-	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $libdir "*) ;;
+-	    *)
+-	      case "$finalize_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
+-	      esac
++	  srcname="$realname"
++	  test -n "$relink_command" && srcname="$realname"T
++
++	  # Install the shared library and build the symlinks.
++	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
++	      'exit $?'
++	  tstripme="$stripme"
++	  case $host_os in
++	  cygwin* | mingw* | pw32* | cegcc*)
++	    case $realname in
++	    *.dll.a)
++	      tstripme=""
+ 	      ;;
+ 	    esac
+-	  fi # $linkmode,$pass = prog,link...
++	    ;;
++	  esac
++	  if test -n "$tstripme" && test -n "$striplib"; then
++	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
++	  fi
+ 
+-	  if test "$alldeplibs" = yes &&
+-	     { test "$deplibs_check_method" = pass_all ||
+-	       { test "$build_libtool_libs" = yes &&
+-		 test -n "$library_names"; }; }; then
+-	    # We only need to search for static libraries
+-	    continue
++	  if test "$#" -gt 0; then
++	    # Delete the old symlinks, and create new ones.
++	    # Try `ln -sf' first, because the `ln' binary might depend on
++	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
++	    # so we also need to try rm && ln -s.
++	    for linkname
++	    do
++	      test "$linkname" != "$realname" \
++		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
++	    done
+ 	  fi
+-	fi
+ 
+-	link_static=no # Whether the deplib will be linked statically
+-	use_static_libs=$prefer_static_libs
+-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+-	  use_static_libs=no
++	  # Do each command in the postinstall commands.
++	  lib="$destdir/$realname"
++	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+ 	fi
+-	if test -n "$library_names" &&
+-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+-	  if test "$installed" = no; then
+-	    notinst_deplibs="$notinst_deplibs $lib"
+-	    need_relink=yes
+-	  fi
+-	  # This is a shared library
+ 
+-	  # Warn about portability, can't link against -module's on
+-	  # some systems (darwin)
+-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+-	    $echo
+-	    if test "$linkmode" = prog; then
+-	      $echo "*** Warning: Linking the executable $output against the loadable module"
+-	    else
+-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+-	    fi
+-	    $echo "*** $linklib is not portable!"
+-	  fi
+-	  if test "$linkmode" = lib &&
+-	     test "$hardcode_into_libs" = yes; then
+-	    # Hardcode the library path.
+-	    # Skip directories that are in the system default run-time
+-	    # search path.
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $absdir "*) ;;
+-	    *)
+-	      case "$compile_rpath " in
+-	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $libdir "*) ;;
+-	    *)
+-	      case "$finalize_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
+-	      esac
+-	      ;;
+-	    esac
+-	  fi
++	# Install the pseudo-library for information purposes.
++	func_basename "$file"
++	name="$func_basename_result"
++	instname="$dir/$name"i
++	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+ 
+-	  if test -n "$old_archive_from_expsyms_cmds"; then
+-	    # figure out the soname
+-	    set dummy $library_names
+-	    realname="$2"
+-	    shift; shift
+-	    libname=`eval \\$echo \"$libname_spec\"`
+-	    # use dlname if we got it. it's perfectly good, no?
+-	    if test -n "$dlname"; then
+-	      soname="$dlname"
+-	    elif test -n "$soname_spec"; then
+-	      # bleh windows
+-	      case $host in
+-	      *cygwin* | mingw*)
+-		major=`expr $current - $age`
+-		versuffix="-$major"
+-		;;
+-	      esac
+-	      eval soname=\"$soname_spec\"
+-	    else
+-	      soname="$realname"
+-	    fi
++	# Maybe install the static library, too.
++	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
++	;;
+ 
+-	    # Make a new name for the extract_expsyms_cmds to use
+-	    soroot="$soname"
+-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
++      *.lo)
++	# Install (i.e. copy) a libtool object.
+ 
+-	    # If the library has no export list, then create one now
+-	    if test -f "$output_objdir/$soname-def"; then :
+-	    else
+-	      $show "extracting exported symbol list from \`$soname'"
+-	      save_ifs="$IFS"; IFS='~'
+-	      cmds=$extract_expsyms_cmds
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		eval cmd=\"$cmd\"
+-		$show "$cmd"
+-		$run eval "$cmd" || exit $?
+-	      done
+-	      IFS="$save_ifs"
+-	    fi
++	# Figure out destination file name, if it wasn't already specified.
++	if test -n "$destname"; then
++	  destfile="$destdir/$destname"
++	else
++	  func_basename "$file"
++	  destfile="$func_basename_result"
++	  destfile="$destdir/$destfile"
++	fi
+ 
+-	    # Create $newlib
+-	    if test -f "$output_objdir/$newlib"; then :; else
+-	      $show "generating import library for \`$soname'"
+-	      save_ifs="$IFS"; IFS='~'
+-	      cmds=$old_archive_from_expsyms_cmds
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		eval cmd=\"$cmd\"
+-		$show "$cmd"
+-		$run eval "$cmd" || exit $?
+-	      done
+-	      IFS="$save_ifs"
+-	    fi
+-	    # make sure the library variables are pointing to the new library
+-	    dir=$output_objdir
+-	    linklib=$newlib
+-	  fi # test -n "$old_archive_from_expsyms_cmds"
++	# Deduce the name of the destination old-style object file.
++	case $destfile in
++	*.lo)
++	  func_lo2o "$destfile"
++	  staticdest=$func_lo2o_result
++	  ;;
++	*.$objext)
++	  staticdest="$destfile"
++	  destfile=
++	  ;;
++	*)
++	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
++	  ;;
++	esac
+ 
+-	  if test "$linkmode" = prog || test "$mode" != relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    lib_linked=yes
+-	    case $hardcode_action in
+-	    immediate | unsupported)
+-	      if test "$hardcode_direct" = no; then
+-		add="$dir/$linklib"
+-		case $host in
+-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+-		    *-*-unixware7*) add_dir="-L$dir" ;;
+-		  *-*-darwin* )
+-		    # if the lib is a module then we can not link against
+-		    # it, someone is ignoring the new warnings I added
+-		    if /usr/bin/file -L $add 2> /dev/null |
+-                      $EGREP ": [^:]* bundle" >/dev/null ; then
+-		      $echo "** Warning, lib $linklib is a module, not a shared library"
+-		      if test -z "$old_library" ; then
+-		        $echo
+-		        $echo "** And there doesn't seem to be a static archive available"
+-		        $echo "** The link will probably fail, sorry"
+-		      else
+-		        add="$dir/$old_library"
+-		      fi
+-		    fi
+-		esac
+-	      elif test "$hardcode_minus_L" = no; then
+-		case $host in
+-		*-*-sunos*) add_shlibpath="$dir" ;;
+-		esac
+-		add_dir="-L$dir"
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = no; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
+-	      else
+-		lib_linked=no
+-	      fi
+-	      ;;
+-	    relink)
+-	      if test "$hardcode_direct" = yes; then
+-		add="$dir/$linklib"
+-	      elif test "$hardcode_minus_L" = yes; then
+-		add_dir="-L$dir"
+-		# Try looking first in the location we're being installed to.
+-		if test -n "$inst_prefix_dir"; then
+-		  case $libdir in
+-		    [\\/]*)
+-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+-		      ;;
+-		  esac
+-		fi
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = yes; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
+-	      else
+-		lib_linked=no
+-	      fi
+-	      ;;
+-	    *) lib_linked=no ;;
+-	    esac
++	# Install the libtool object if requested.
++	test -n "$destfile" && \
++	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+ 
+-	    if test "$lib_linked" != yes; then
+-	      $echo "$modename: configuration error: unsupported hardcode properties"
+-	      exit $EXIT_FAILURE
+-	    fi
++	# Install the old object if enabled.
++	if test "$build_old_libs" = yes; then
++	  # Deduce the name of the old-style object file.
++	  func_lo2o "$file"
++	  staticobj=$func_lo2o_result
++	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
++	fi
++	exit $EXIT_SUCCESS
++	;;
+ 
+-	    if test -n "$add_shlibpath"; then
+-	      case :$compile_shlibpath: in
+-	      *":$add_shlibpath:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+-	      esac
+-	    fi
+-	    if test "$linkmode" = prog; then
+-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+-	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
+-	      if test "$hardcode_direct" != yes && \
+-		 test "$hardcode_minus_L" != yes && \
+-		 test "$hardcode_shlibpath_var" = yes; then
+-		case :$finalize_shlibpath: in
+-		*":$libdir:"*) ;;
+-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+-		esac
+-	      fi
++      *)
++	# Figure out destination file name, if it wasn't already specified.
++	if test -n "$destname"; then
++	  destfile="$destdir/$destname"
++	else
++	  func_basename "$file"
++	  destfile="$func_basename_result"
++	  destfile="$destdir/$destfile"
++	fi
++
++	# If the file is missing, and there is a .exe on the end, strip it
++	# because it is most likely a libtool script we actually want to
++	# install
++	stripped_ext=""
++	case $file in
++	  *.exe)
++	    if test ! -f "$file"; then
++	      func_stripname '' '.exe' "$file"
++	      file=$func_stripname_result
++	      stripped_ext=".exe"
+ 	    fi
+-	  fi
++	    ;;
++	esac
+ 
+-	  if test "$linkmode" = prog || test "$mode" = relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    # Finalize command for both is simple: just hardcode it.
+-	    if test "$hardcode_direct" = yes; then
+-	      add="$libdir/$linklib"
+-	    elif test "$hardcode_minus_L" = yes; then
+-	      add_dir="-L$libdir"
+-	      add="-l$name"
+-	    elif test "$hardcode_shlibpath_var" = yes; then
+-	      case :$finalize_shlibpath: in
+-	      *":$libdir:"*) ;;
+-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+-	      esac
+-	      add="-l$name"
+-	    elif test "$hardcode_automatic" = yes; then
+-	      if test -n "$inst_prefix_dir" &&
+-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+-	        add="$inst_prefix_dir$libdir/$linklib"
+-	      else
+-	        add="$libdir/$linklib"
+-	      fi
++	# Do a test to see if this is really a libtool program.
++	case $host in
++	*cygwin* | *mingw*)
++	    if func_ltwrapper_executable_p "$file"; then
++	      func_ltwrapper_scriptname "$file"
++	      wrapper=$func_ltwrapper_scriptname_result
+ 	    else
+-	      # We cannot seem to hardcode it, guess we'll fake it.
+-	      add_dir="-L$libdir"
+-	      # Try looking first in the location we're being installed to.
+-	      if test -n "$inst_prefix_dir"; then
+-		case $libdir in
+-		  [\\/]*)
+-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+-		    ;;
+-		esac
+-	      fi
+-	      add="-l$name"
++	      func_stripname '' '.exe' "$file"
++	      wrapper=$func_stripname_result
+ 	    fi
++	    ;;
++	*)
++	    wrapper=$file
++	    ;;
++	esac
++	if func_ltwrapper_script_p "$wrapper"; then
++	  notinst_deplibs=
++	  relink_command=
+ 
+-	    if test "$linkmode" = prog; then
+-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+-	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
++	  func_source "$wrapper"
++
++	  # Check the variables that should have been set.
++	  test -z "$generated_by_libtool_version" && \
++	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
++
++	  finalize=yes
++	  for lib in $notinst_deplibs; do
++	    # Check to see that each library is installed.
++	    libdir=
++	    if test -f "$lib"; then
++	      func_source "$lib"
+ 	    fi
+-	  fi
+-	elif test "$linkmode" = prog; then
+-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+-	  # is not unsupported.  This is valid on all known static and
+-	  # shared platforms.
+-	  if test "$hardcode_direct" != unsupported; then
+-	    test -n "$old_library" && linklib="$old_library"
+-	    compile_deplibs="$dir/$linklib $compile_deplibs"
+-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+-	  else
+-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+-	  fi
+-	elif test "$build_libtool_libs" = yes; then
+-	  # Not a shared library
+-	  if test "$deplibs_check_method" != pass_all; then
+-	    # We're trying link a shared library against a static one
+-	    # but the system doesn't support it.
++	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
++	    if test -n "$libdir" && test ! -f "$libfile"; then
++	      func_warning "\`$lib' has not been installed in \`$libdir'"
++	      finalize=no
++	    fi
++	  done
+ 
+-	    # Just print a warning and add the library to dependency_libs so
+-	    # that the program can be linked against the static library.
+-	    $echo
+-	    $echo "*** Warning: This system can not link to static lib archive $lib."
+-	    $echo "*** I have the capability to make that library automatically link in when"
+-	    $echo "*** you link to this library.  But I can only do this if you have a"
+-	    $echo "*** shared version of the library, which you do not appear to have."
+-	    if test "$module" = yes; then
+-	      $echo "*** But as you try to build a module library, libtool will still create "
+-	      $echo "*** a static module, that should work as long as the dlopening application"
+-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+-	      if test -z "$global_symbol_pipe"; then
+-		$echo
+-		$echo "*** However, this would only work if libtool was able to extract symbol"
+-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-		$echo "*** not find such a program.  So, this module is probably useless."
+-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+-	      fi
+-	      if test "$build_old_libs" = no; then
+-		build_libtool_libs=module
+-		build_old_libs=yes
++	  relink_command=
++	  func_source "$wrapper"
++
++	  outputname=
++	  if test "$fast_install" = no && test -n "$relink_command"; then
++	    $opt_dry_run || {
++	      if test "$finalize" = yes; then
++	        tmpdir=`func_mktempdir`
++		func_basename "$file$stripped_ext"
++		file="$func_basename_result"
++	        outputname="$tmpdir/$file"
++	        # Replace the output file specification.
++	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
++
++	        $opt_silent || {
++	          func_quote_for_expand "$relink_command"
++		  eval "func_echo $func_quote_for_expand_result"
++	        }
++	        if eval "$relink_command"; then :
++	          else
++		  func_error "error: relink \`$file' with the above command before installing it"
++		  $opt_dry_run || ${RM}r "$tmpdir"
++		  continue
++	        fi
++	        file="$outputname"
+ 	      else
+-		build_libtool_libs=no
++	        func_warning "cannot relink \`$file'"
+ 	      fi
+-	    fi
++	    }
+ 	  else
+-	    deplibs="$dir/$old_library $deplibs"
+-	    link_static=yes
++	    # Install the binary that we compiled earlier.
++	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ 	  fi
+-	fi # link shared/static library?
++	fi
+ 
+-	if test "$linkmode" = lib; then
+-	  if test -n "$dependency_libs" &&
+-	     { test "$hardcode_into_libs" != yes ||
+-	       test "$build_old_libs" = yes ||
+-	       test "$link_static" = yes; }; then
+-	    # Extract -R from dependency_libs
+-	    temp_deplibs=
+-	    for libdir in $dependency_libs; do
+-	      case $libdir in
+-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+-		   case " $xrpath " in
+-		   *" $temp_xrpath "*) ;;
+-		   *) xrpath="$xrpath $temp_xrpath";;
+-		   esac;;
+-	      *) temp_deplibs="$temp_deplibs $libdir";;
+-	      esac
+-	    done
+-	    dependency_libs="$temp_deplibs"
+-	  fi
+-
+-	  newlib_search_path="$newlib_search_path $absdir"
+-	  # Link against this library
+-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+-	  # ... and its dependency_libs
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    if test "X$duplicate_deps" = "Xyes" ; then
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
+-	    fi
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done
+-
+-	  if test "$link_all_deplibs" != no; then
+-	    # Add the search paths of all dependency libraries
+-	    for deplib in $dependency_libs; do
+-	      case $deplib in
+-	      -L*) path="$deplib" ;;
+-	      *.la)
+-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+-		test "X$dir" = "X$deplib" && dir="."
+-		# We need an absolute path.
+-		case $dir in
+-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+-		*)
+-		  absdir=`cd "$dir" && pwd`
+-		  if test -z "$absdir"; then
+-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+-		    absdir="$dir"
+-		  fi
+-		  ;;
+-		esac
+-		if grep "^installed=no" $deplib > /dev/null; then
+-		  path="$absdir/$objdir"
+-		else
+-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+-		  if test -z "$libdir"; then
+-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+-		    exit $EXIT_FAILURE
+-		  fi
+-		  if test "$absdir" != "$libdir"; then
+-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+-		  fi
+-		  path="$absdir"
+-		fi
+-		depdepl=
+-		case $host in
+-		*-*-darwin*)
+-		  # we do not want to link against static libs,
+-		  # but need to link against shared
+-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+-		  if test -n "$deplibrary_names" ; then
+-		    for tmp in $deplibrary_names ; do
+-		      depdepl=$tmp
+-		    done
+-		    if test -f "$path/$depdepl" ; then
+-		      depdepl="$path/$depdepl"
+-		    fi
+-		    # do not add paths which are already there
+-		    case " $newlib_search_path " in
+-		    *" $path "*) ;;
+-		    *) newlib_search_path="$newlib_search_path $path";;
+-		    esac
+-		  fi
+-		  path=""
+-		  ;;
+-		*)
+-		  path="-L$path"
+-		  ;;
+-		esac
+-		;;
+-	      -l*)
+-		case $host in
+-		*-*-darwin*)
+-		  # Again, we only want to link against shared libraries
+-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+-		  for tmp in $newlib_search_path ; do
+-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+-		      break
+-		    fi
+-		  done
+-		  path=""
+-		  ;;
+-		*) continue ;;
+-		esac
+-		;;
+-	      *) continue ;;
+-	      esac
+-	      case " $deplibs " in
+-	      *" $path "*) ;;
+-	      *) deplibs="$path $deplibs" ;;
+-	      esac
+-	      case " $deplibs " in
+-	      *" $depdepl "*) ;;
+-	      *) deplibs="$depdepl $deplibs" ;;
+-	      esac
+-	    done
+-	  fi # link_all_deplibs != no
+-	fi # linkmode = lib
+-      done # for deplib in $libs
+-      dependency_libs="$newdependency_libs"
+-      if test "$pass" = dlpreopen; then
+-	# Link the dlpreopened libraries before other libraries
+-	for deplib in $save_deplibs; do
+-	  deplibs="$deplib $deplibs"
+-	done
+-      fi
+-      if test "$pass" != dlopen; then
+-	if test "$pass" != conv; then
+-	  # Make sure lib_search_path contains only unique directories.
+-	  lib_search_path=
+-	  for dir in $newlib_search_path; do
+-	    case "$lib_search_path " in
+-	    *" $dir "*) ;;
+-	    *) lib_search_path="$lib_search_path $dir" ;;
+-	    esac
+-	  done
+-	  newlib_search_path=
+-	fi
+-
+-	if test "$linkmode,$pass" != "prog,link"; then
+-	  vars="deplibs"
+-	else
+-	  vars="compile_deplibs finalize_deplibs"
+-	fi
+-	for var in $vars dependency_libs; do
+-	  # Add libraries to $var in reverse order
+-	  eval tmp_libs=\"\$$var\"
+-	  new_libs=
+-	  for deplib in $tmp_libs; do
+-	    # FIXME: Pedantically, this is the right thing to do, so
+-	    #        that some nasty dependency loop isn't accidentally
+-	    #        broken:
+-	    #new_libs="$deplib $new_libs"
+-	    # Pragmatically, this seems to cause very few problems in
+-	    # practice:
+-	    case $deplib in
+-	    -L*) new_libs="$deplib $new_libs" ;;
+-	    -R*) ;;
+-	    *)
+-	      # And here is the reason: when a library appears more
+-	      # than once as an explicit dependence of a library, or
+-	      # is implicitly linked in more than once by the
+-	      # compiler, it is considered special, and multiple
+-	      # occurrences thereof are not removed.  Compare this
+-	      # with having the same library being listed as a
+-	      # dependency of multiple other libraries: in this case,
+-	      # we know (pedantically, we assume) the library does not
+-	      # need to be listed more than once, so we keep only the
+-	      # last copy.  This is not always right, but it is rare
+-	      # enough that we require users that really mean to play
+-	      # such unportable linking tricks to link the library
+-	      # using -Wl,-lname, so that libtool does not consider it
+-	      # for duplicate removal.
+-	      case " $specialdeplibs " in
+-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+-	      *)
+-		case " $new_libs " in
+-		*" $deplib "*) ;;
+-		*) new_libs="$deplib $new_libs" ;;
+-		esac
+-		;;
+-	      esac
+-	      ;;
+-	    esac
+-	  done
+-	  tmp_libs=
+-	  for deplib in $new_libs; do
+-	    case $deplib in
+-	    -L*)
+-	      case " $tmp_libs " in
+-	      *" $deplib "*) ;;
+-	      *) tmp_libs="$tmp_libs $deplib" ;;
+-	      esac
+-	      ;;
+-	    *) tmp_libs="$tmp_libs $deplib" ;;
+-	    esac
+-	  done
+-	  eval $var=\"$tmp_libs\"
+-	done # for var
+-      fi
+-      # Last step: remove runtime libs from dependency_libs
+-      # (they stay in deplibs)
+-      tmp_libs=
+-      for i in $dependency_libs ; do
+-	case " $predeps $postdeps $compiler_lib_search_path " in
+-	*" $i "*)
+-	  i=""
++	# remove .exe since cygwin /usr/bin/install will append another
++	# one anyway
++	case $install_prog,$host in
++	*/usr/bin/install*,*cygwin*)
++	  case $file:$destfile in
++	  *.exe:*.exe)
++	    # this is ok
++	    ;;
++	  *.exe:*)
++	    destfile=$destfile.exe
++	    ;;
++	  *:*.exe)
++	    func_stripname '' '.exe' "$destfile"
++	    destfile=$func_stripname_result
++	    ;;
++	  esac
+ 	  ;;
+ 	esac
+-	if test -n "$i" ; then
+-	  tmp_libs="$tmp_libs $i"
++	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
++	$opt_dry_run || if test -n "$outputname"; then
++	  ${RM}r "$tmpdir"
+ 	fi
+-      done
+-      dependency_libs=$tmp_libs
+-    done # for pass
+-    if test "$linkmode" = prog; then
+-      dlfiles="$newdlfiles"
+-      dlprefiles="$newdlprefiles"
+-    fi
++	;;
++      esac
++    done
+ 
+-    case $linkmode in
+-    oldlib)
+-      if test -n "$deplibs"; then
+-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+-      fi
++    for file in $staticlibs; do
++      func_basename "$file"
++      name="$func_basename_result"
+ 
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+-      fi
++      # Set up the ranlib parameters.
++      oldlib="$destdir/$name"
++      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
++      tool_oldlib=$func_to_tool_file_result
+ 
+-      if test -n "$rpath"; then
+-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+-      fi
++      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+ 
+-      if test -n "$xrpath"; then
+-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
++      if test -n "$stripme" && test -n "$old_striplib"; then
++	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+       fi
+ 
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+-      fi
++      # Do each command in the postinstall commands.
++      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
++    done
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+-      fi
++    test -n "$future_libdirs" && \
++      func_warning "remember to run \`$progname --finish$future_libdirs'"
+ 
+-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+-      fi
++    if test -n "$current_libdirs"; then
++      # Maybe just do a dry run.
++      $opt_dry_run && current_libdirs=" -n$current_libdirs"
++      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
++    else
++      exit $EXIT_SUCCESS
++    fi
++}
+ 
+-      # Now set the variables for building old libraries.
+-      build_libtool_libs=no
+-      oldlibs="$output"
+-      objs="$objs$old_deplibs"
+-      ;;
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
+ 
+-    lib)
+-      # Make sure we only generate libraries of the form `libNAME.la'.
+-      case $outputname in
+-      lib*)
+-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+-	eval shared_ext=\"$shrext_cmds\"
+-	eval libname=\"$libname_spec\"
+-	;;
+-      *)
+-	if test "$module" = no; then
+-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
+-	if test "$need_lib_prefix" != no; then
+-	  # Add the "lib" prefix for modules if required
+-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+-	  eval shared_ext=\"$shrext_cmds\"
+-	  eval libname=\"$libname_spec\"
+-	else
+-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+-	fi
+-	;;
+-      esac
+ 
+-      if test -n "$objs"; then
+-	if test "$deplibs_check_method" != pass_all; then
+-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+-	  exit $EXIT_FAILURE
+-	else
+-	  $echo
+-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+-	  $echo "*** objects $objs is not portable!"
+-	  libobjs="$libobjs $objs"
+-	fi
++# func_generate_dlsyms outputname originator pic_p
++# Extract symbols from dlprefiles and create ${outputname}S.o with
++# a dlpreopen symbol table.
++func_generate_dlsyms ()
++{
++    $opt_debug
++    my_outputname="$1"
++    my_originator="$2"
++    my_pic_p="${3-no}"
++    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
++    my_dlsyms=
++
++    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++      if test -n "$NM" && test -n "$global_symbol_pipe"; then
++	my_dlsyms="${my_outputname}S.c"
++      else
++	func_error "not configured to extract global symbols from dlpreopened files"
+       fi
++    fi
+ 
+-      if test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+-      fi
++    if test -n "$my_dlsyms"; then
++      case $my_dlsyms in
++      "") ;;
++      *.c)
++	# Discover the nlist of each of the dlfiles.
++	nlist="$output_objdir/${my_outputname}.nm"
+ 
+-      set dummy $rpath
+-      if test "$#" -gt 2; then
+-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+-      fi
+-      install_libdir="$2"
++	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+ 
+-      oldlibs=
+-      if test -z "$rpath"; then
+-	if test "$build_libtool_libs" = yes; then
+-	  # Building a libtool convenience library.
+-	  # Some compilers have problems with a `.al' extension so
+-	  # convenience libraries should have the same extension an
+-	  # archive normally would.
+-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+-	  build_libtool_libs=convenience
+-	  build_old_libs=yes
+-	fi
++	# Parse the name list into a source file.
++	func_verbose "creating $output_objdir/$my_dlsyms"
+ 
+-	if test -n "$vinfo"; then
+-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+-	fi
++	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+ 
+-	if test -n "$release"; then
+-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+-	fi
+-      else
++#ifdef __cplusplus
++extern \"C\" {
++#endif
+ 
+-	# Parse the version information argument.
+-	save_ifs="$IFS"; IFS=':'
+-	set dummy $vinfo 0 0 0
+-	IFS="$save_ifs"
++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
++#endif
+ 
+-	if test -n "$8"; then
+-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
+ 
+-	# convert absolute version numbers to libtool ages
+-	# this retains compatibility with .la files and attempts
+-	# to make the code below a bit more comprehensible
++/* External symbol declarations for the compiler. */\
++"
+ 
+-	case $vinfo_number in
+-	yes)
+-	  number_major="$2"
+-	  number_minor="$3"
+-	  number_revision="$4"
+-	  #
+-	  # There are really only two kinds -- those that
+-	  # use the current revision as the major version
+-	  # and those that subtract age and use age as
+-	  # a minor version.  But, then there is irix
+-	  # which has an extra 1 added just for fun
+-	  #
+-	  case $version_type in
+-	  darwin|linux|osf|windows|none)
+-	    current=`expr $number_major + $number_minor`
+-	    age="$number_minor"
+-	    revision="$number_revision"
+-	    ;;
+-	  freebsd-aout|freebsd-elf|sunos)
+-	    current="$number_major"
+-	    revision="$number_minor"
+-	    age="0"
+-	    ;;
+-	  irix|nonstopux)
+-	    current=`expr $number_major + $number_minor - 1`
+-	    age="$number_minor"
+-	    revision="$number_minor"
+-	    ;;
+-	  esac
+-	  ;;
+-	no)
+-	  current="$2"
+-	  revision="$3"
+-	  age="$4"
+-	  ;;
+-	esac
++	if test "$dlself" = yes; then
++	  func_verbose "generating symbol list for \`$output'"
+ 
+-	# Check that each of the things are valid numbers.
+-	case $current in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
++	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+ 
+-	case $revision in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
++	  # Add our own program objects to the symbol list.
++	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	  for progfile in $progfiles; do
++	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
++	  done
+ 
+-	case $age in
+-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
++	  if test -n "$exclude_expsyms"; then
++	    $opt_dry_run || {
++	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	    }
++	  fi
+ 
+-	if test "$age" -gt "$current"; then
+-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit $EXIT_FAILURE
++	  if test -n "$export_symbols_regex"; then
++	    $opt_dry_run || {
++	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	    }
++	  fi
++
++	  # Prepare the list of exported symbols
++	  if test -z "$export_symbols"; then
++	    export_symbols="$output_objdir/$outputname.exp"
++	    $opt_dry_run || {
++	      $RM $export_symbols
++	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++	      case $host in
++	      *cygwin* | *mingw* | *cegcc* )
++                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++	        ;;
++	      esac
++	    }
++	  else
++	    $opt_dry_run || {
++	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	      case $host in
++	        *cygwin* | *mingw* | *cegcc* )
++	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++	          ;;
++	      esac
++	    }
++	  fi
+ 	fi
+ 
+-	# Calculate the version variables.
+-	major=
+-	versuffix=
+-	verstring=
+-	case $version_type in
+-	none) ;;
++	for dlprefile in $dlprefiles; do
++	  func_verbose "extracting global C symbols from \`$dlprefile'"
++	  func_basename "$dlprefile"
++	  name="$func_basename_result"
++          case $host in
++	    *cygwin* | *mingw* | *cegcc* )
++	      # if an import library, we need to obtain dlname
++	      if func_win32_import_lib_p "$dlprefile"; then
++	        func_tr_sh "$dlprefile"
++	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
++	        dlprefile_dlbasename=""
++	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++	          # Use subshell, to avoid clobbering current variable values
++	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++	          if test -n "$dlprefile_dlname" ; then
++	            func_basename "$dlprefile_dlname"
++	            dlprefile_dlbasename="$func_basename_result"
++	          else
++	            # no lafile. user explicitly requested -dlpreopen <import library>.
++	            $sharedlib_from_linklib_cmd "$dlprefile"
++	            dlprefile_dlbasename=$sharedlib_from_linklib_result
++	          fi
++	        fi
++	        $opt_dry_run || {
++	          if test -n "$dlprefile_dlbasename" ; then
++	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++	          else
++	            func_warning "Could not compute DLL name from $name"
++	            eval '$ECHO ": $name " >> "$nlist"'
++	          fi
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++	        }
++	      else # not an import lib
++	        $opt_dry_run || {
++	          eval '$ECHO ": $name " >> "$nlist"'
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	        }
++	      fi
++	    ;;
++	    *)
++	      $opt_dry_run || {
++	        eval '$ECHO ": $name " >> "$nlist"'
++	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	      }
++	    ;;
++          esac
++	done
+ 
+-	darwin)
+-	  # Like Linux, but with the current version available in
+-	  # verstring for coding it into the library header
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
+-	  # Darwin ld doesn't like 0 for these options...
+-	  minor_current=`expr $current + 1`
+-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+-	  ;;
++	$opt_dry_run || {
++	  # Make sure we have at least an empty file.
++	  test -f "$nlist" || : > "$nlist"
++
++	  if test -n "$exclude_expsyms"; then
++	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++	    $MV "$nlist"T "$nlist"
++	  fi
+ 
+-	freebsd-aout)
+-	  major=".$current"
+-	  versuffix=".$current.$revision";
+-	  ;;
++	  # Try sorting and uniquifying the output.
++	  if $GREP -v "^: " < "$nlist" |
++	      if sort -k 3 </dev/null >/dev/null 2>&1; then
++		sort -k 3
++	      else
++		sort +2
++	      fi |
++	      uniq > "$nlist"S; then
++	    :
++	  else
++	    $GREP -v "^: " < "$nlist" > "$nlist"S
++	  fi
+ 
+-	freebsd-elf)
+-	  major=".$current"
+-	  versuffix=".$current";
+-	  ;;
++	  if test -f "$nlist"S; then
++	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
++	  else
++	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
++	  fi
+ 
+-	irix | nonstopux)
+-	  major=`expr $current - $age + 1`
++	  echo >> "$output_objdir/$my_dlsyms" "\
+ 
+-	  case $version_type in
+-	    nonstopux) verstring_prefix=nonstopux ;;
+-	    *)         verstring_prefix=sgi ;;
++/* The mapping between symbol names and symbols.  */
++typedef struct {
++  const char *name;
++  void *address;
++} lt_dlsymlist;
++extern LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[];
++LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[] =
++{\
++  { \"$my_originator\", (void *) 0 },"
++
++	  case $need_lib_prefix in
++	  no)
++	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
++	    ;;
++	  *)
++	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
++	    ;;
+ 	  esac
+-	  verstring="$verstring_prefix$major.$revision"
++	  echo >> "$output_objdir/$my_dlsyms" "\
++  {0, (void *) 0}
++};
+ 
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$revision
+-	  while test "$loop" -ne 0; do
+-	    iface=`expr $revision - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="$verstring_prefix$major.$iface:$verstring"
+-	  done
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++  return lt_${my_prefix}_LTX_preloaded_symbols;
++}
++#endif
+ 
+-	  # Before this point, $major must not contain `.'.
+-	  major=.$major
+-	  versuffix="$major.$revision"
+-	  ;;
++#ifdef __cplusplus
++}
++#endif\
++"
++	} # !$opt_dry_run
+ 
+-	linux)
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
++	pic_flag_for_symtable=
++	case "$compile_command " in
++	*" -static "*) ;;
++	*)
++	  case $host in
++	  # compiling the symbol table file with pic_flag works around
++	  # a FreeBSD bug that causes programs to crash when -lm is
++	  # linked before any other PIC object.  But we must not use
++	  # pic_flag when linking with -static.  The problem exists in
++	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
++	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
++	  *-*-hpux*)
++	    pic_flag_for_symtable=" $pic_flag"  ;;
++	  *)
++	    if test "X$my_pic_p" != Xno; then
++	      pic_flag_for_symtable=" $pic_flag"
++	    fi
++	    ;;
++	  esac
+ 	  ;;
++	esac
++	symtab_cflags=
++	for arg in $LTCFLAGS; do
++	  case $arg in
++	  -pie | -fpie | -fPIE) ;;
++	  *) func_append symtab_cflags " $arg" ;;
++	  esac
++	done
+ 
+-	osf)
+-	  major=.`expr $current - $age`
+-	  versuffix=".$current.$age.$revision"
+-	  verstring="$current.$age.$revision"
+-
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$age
+-	  while test "$loop" -ne 0; do
+-	    iface=`expr $current - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="$verstring:${iface}.0"
+-	  done
+-
+-	  # Make executables depend on our current version.
+-	  verstring="$verstring:${current}.0"
+-	  ;;
++	# Now compile the dynamic symbol file.
++	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+ 
+-	sunos)
+-	  major=".$current"
+-	  versuffix=".$current.$revision"
+-	  ;;
++	# Clean up the generated files.
++	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ 
+-	windows)
+-	  # Use '-' rather than '.', since we only want one
+-	  # extension on DOS 8.3 filesystems.
+-	  major=`expr $current - $age`
+-	  versuffix="-$major"
++	# Transform the symbol file into the correct name.
++	symfileobj="$output_objdir/${my_outputname}S.$objext"
++	case $host in
++	*cygwin* | *mingw* | *cegcc* )
++	  if test -f "$output_objdir/$my_outputname.def"; then
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	  else
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  fi
+ 	  ;;
+-
+ 	*)
+-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-	  exit $EXIT_FAILURE
++	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ 	  ;;
+ 	esac
++	;;
++      *)
++	func_fatal_error "unknown suffix for \`$my_dlsyms'"
++	;;
++      esac
++    else
++      # We keep going just in case the user didn't refer to
++      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
++      # really was required.
++
++      # Nullify the symbol file.
++      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
++      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
++    fi
++}
+ 
+-	# Clear the version info if we defaulted, and they specified a release.
+-	if test -z "$vinfo" && test -n "$release"; then
+-	  major=
+-	  case $version_type in
+-	  darwin)
+-	    # we can't check for "0.0" in archive_cmds due to quoting
+-	    # problems, so we reset it completely
+-	    verstring=
+-	    ;;
+-	  *)
+-	    verstring="0.0"
+-	    ;;
+-	  esac
+-	  if test "$need_version" = no; then
+-	    versuffix=
+-	  else
+-	    versuffix=".0.0"
+-	  fi
+-	fi
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
++# Need a lot of goo to handle *both* DLLs and import libs
++# Has to be a shell function in order to 'eat' the argument
++# that is supplied when $file_magic_command is called.
++# Despite the name, also deal with 64 bit binaries.
++func_win32_libid ()
++{
++  $opt_debug
++  win32_libid_type="unknown"
++  win32_fileres=`file -L $1 2>/dev/null`
++  case $win32_fileres in
++  *ar\ archive\ import\ library*) # definitely import
++    win32_libid_type="x86 archive import"
++    ;;
++  *ar\ archive*) # could be an import, or static
++    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
++    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
++       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++      func_to_tool_file "$1" func_convert_file_msys_to_w32
++      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
++	$SED -n -e '
++	    1,100{
++		/ I /{
++		    s,.*,import,
++		    p
++		    q
++		}
++	    }'`
++      case $win32_nmres in
++      import*)  win32_libid_type="x86 archive import";;
++      *)        win32_libid_type="x86 archive static";;
++      esac
++    fi
++    ;;
++  *DLL*)
++    win32_libid_type="x86 DLL"
++    ;;
++  *executable*) # but shell scripts are "executable" too...
++    case $win32_fileres in
++    *MS\ Windows\ PE\ Intel*)
++      win32_libid_type="x86 DLL"
++      ;;
++    esac
++    ;;
++  esac
++  $ECHO "$win32_libid_type"
++}
+ 
+-	# Remove version info from name if versioning should be avoided
+-	if test "$avoid_version" = yes && test "$need_version" = no; then
+-	  major=
+-	  versuffix=
+-	  verstring=""
+-	fi
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++  $opt_debug
++  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
+ 
+-	# Check to see if the archive will have undefined symbols.
+-	if test "$allow_undefined" = yes; then
+-	  if test "$allow_undefined_flag" = unsupported; then
+-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+-	    build_libtool_libs=no
+-	    build_old_libs=yes
+-	  fi
+-	else
+-	  # Don't allow undefined symbols.
+-	  allow_undefined_flag="$no_undefined_flag"
+-	fi
+-      fi
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++  $opt_debug
++  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++    $SED '/^Contents of section '"$match_literal"':/{
++      # Place marker at beginning of archive member dllname section
++      s/.*/====MARK====/
++      p
++      d
++    }
++    # These lines can sometimes be longer than 43 characters, but
++    # are always uninteresting
++    /:[	 ]*file format pe[i]\{,1\}-/d
++    /^In archive [^:]*:/d
++    # Ensure marker is printed
++    /^====MARK====/p
++    # Remove all lines with less than 43 characters
++    /^.\{43\}/!d
++    # From remaining lines, remove first 43 characters
++    s/^.\{43\}//' |
++    $SED -n '
++      # Join marker and all lines until next marker into a single line
++      /^====MARK====/ b para
++      H
++      $ b para
++      b
++      :para
++      x
++      s/\n//g
++      # Remove the marker
++      s/^====MARK====//
++      # Remove trailing dots and whitespace
++      s/[\. \t]*$//
++      # Print
++      /./p' |
++    # we now have a list, one entry per line, of the stringified
++    # contents of the appropriate section of all members of the
++    # archive which possess that section. Heuristic: eliminate
++    # all those which have a first or second character that is
++    # a '.' (that is, objdump's representation of an unprintable
++    # character.) This should work for all archives with less than
++    # 0x302f exports -- but will fail for DLLs whose name actually
++    # begins with a literal '.' or a single character followed by
++    # a '.'.
++    #
++    # Of those that remain, print the first one.
++    $SED -e '/^\./d;/^.\./d;q'
++}
+ 
+-      if test "$mode" != relink; then
+-	# Remove our outputs, but don't remove object files since they
+-	# may have been created when compiling PIC objects.
+-	removelist=
+-	tempremovelist=`$echo "$output_objdir/*"`
+-	for p in $tempremovelist; do
+-	  case $p in
+-	    *.$objext)
+-	       ;;
+-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+-	       if test "X$precious_files_regex" != "X"; then
+-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+-	         then
+-		   continue
+-		 fi
+-	       fi
+-	       removelist="$removelist $p"
+-	       ;;
+-	    *) ;;
+-	  esac
+-	done
+-	if test -n "$removelist"; then
+-	  $show "${rm}r $removelist"
+-	  $run ${rm}r $removelist
+-	fi
+-      fi
+-
+-      # Now set the variables for building old libraries.
+-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++  test -n "$func_cygming_gnu_implib_tmp"
++}
+ 
+-	# Transform .lo files to .o files.
+-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+-      fi
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++  test -n "$func_cygming_ms_implib_tmp"
++}
+ 
+-      # Eliminate all temporary directories.
+-#      for path in $notinst_path; do
+-#	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+-#	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+-#	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+-#      done
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++  $opt_debug
++  if func_cygming_gnu_implib_p "$1" ; then
++    # binutils import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++  elif func_cygming_ms_implib_p "$1" ; then
++    # ms-generated import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
++  else
++    # unknown
++    sharedlib_from_linklib_result=""
++  fi
++}
+ 
+-      if test -n "$xrpath"; then
+-	# If the user specified any rpath flags, then add them.
+-	temp_xrpath=
+-	for libdir in $xrpath; do
+-	  temp_xrpath="$temp_xrpath -R$libdir"
+-	  case "$finalize_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+-	  esac
+-	done
+-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+-	  dependency_libs="$temp_xrpath $dependency_libs"
+-	fi
+-      fi
+ 
+-      # Make sure dlfiles contains only unique files that won't be dlpreopened
+-      old_dlfiles="$dlfiles"
+-      dlfiles=
+-      for lib in $old_dlfiles; do
+-	case " $dlprefiles $dlfiles " in
+-	*" $lib "*) ;;
+-	*) dlfiles="$dlfiles $lib" ;;
+-	esac
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++    $opt_debug
++    f_ex_an_ar_dir="$1"; shift
++    f_ex_an_ar_oldlib="$1"
++    if test "$lock_old_archive_extraction" = yes; then
++      lockfile=$f_ex_an_ar_oldlib.lock
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
+       done
++    fi
++    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
++		   'stat=$?; rm -f "$lockfile"; exit $stat'
++    if test "$lock_old_archive_extraction" = yes; then
++      $opt_dry_run || rm -f "$lockfile"
++    fi
++    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++     :
++    else
++      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
++    fi
++}
+ 
+-      # Make sure dlprefiles contains only unique files
+-      old_dlprefiles="$dlprefiles"
+-      dlprefiles=
+-      for lib in $old_dlprefiles; do
+-	case "$dlprefiles " in
+-	*" $lib "*) ;;
+-	*) dlprefiles="$dlprefiles $lib" ;;
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++    $opt_debug
++    my_gentop="$1"; shift
++    my_oldlibs=${1+"$@"}
++    my_oldobjs=""
++    my_xlib=""
++    my_xabs=""
++    my_xdir=""
++
++    for my_xlib in $my_oldlibs; do
++      # Extract the objects.
++      case $my_xlib in
++	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++	*) my_xabs=`pwd`"/$my_xlib" ;;
++      esac
++      func_basename "$my_xlib"
++      my_xlib="$func_basename_result"
++      my_xlib_u=$my_xlib
++      while :; do
++        case " $extracted_archives " in
++	*" $my_xlib_u "*)
++	  func_arith $extracted_serial + 1
++	  extracted_serial=$func_arith_result
++	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
++	*) break ;;
+ 	esac
+       done
++      extracted_archives="$extracted_archives $my_xlib_u"
++      my_xdir="$my_gentop/$my_xlib_u"
+ 
+-      if test "$build_libtool_libs" = yes; then
+-	if test -n "$rpath"; then
+-	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+-	    # these systems don't actually have a c library (as such)!
+-	    ;;
+-	  *-*-rhapsody* | *-*-darwin1.[012])
+-	    # Rhapsody C library is in the System framework
+-	    deplibs="$deplibs -framework System"
+-	    ;;
+-	  *-*-netbsd*)
+-	    # Don't link with libc until the a.out ld.so is fixed.
+-	    ;;
+-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+-	    # Do not include libc due to us having libc/libc_r.
+-	    ;;
+-	  *-*-sco3.2v5* | *-*-sco5v6*)
+-	    # Causes problems with __ctype
+-	    ;;
+-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+-	    # Compiler inserts libc in the correct place for threads to work
+-	    ;;
+- 	  *)
+-	    # Add libc to deplibs on all other systems if necessary.
+-	    if test "$build_libtool_need_lc" = "yes"; then
+-	      deplibs="$deplibs -lc"
+-	    fi
+-	    ;;
+-	  esac
+-	fi
++      func_mkdir_p "$my_xdir"
+ 
+-	# Transform deplibs into only deplibs that can be linked in shared.
+-	name_save=$name
+-	libname_save=$libname
+-	release_save=$release
+-	versuffix_save=$versuffix
+-	major_save=$major
+-	# I'm not sure if I'm treating the release correctly.  I think
+-	# release should show up in the -l (ie -lgmp5) so we don't want to
+-	# add it in twice.  Is that correct?
+-	release=""
+-	versuffix=""
+-	major=""
+-	newdeplibs=
+-	droppeddeps=no
+-	case $deplibs_check_method in
+-	pass_all)
+-	  # Don't check for shared/static.  Everything works.
+-	  # This might be a little naive.  We might want to check
+-	  # whether the library exists or not.  But this is on
+-	  # osf3 & osf4 and I'm not really sure... Just
+-	  # implementing what was already the behavior.
+-	  newdeplibs=$deplibs
+-	  ;;
+-	test_compile)
+-	  # This code stresses the "libraries are programs" paradigm to its
+-	  # limits. Maybe even breaks it.  We compile a program, linking it
+-	  # against the deplibs as a proxy for the library.  Then we can check
+-	  # whether they linked in statically or dynamically with ldd.
+-	  $rm conftest.c
+-	  cat > conftest.c <<EOF
+-	  int main() { return 0; }
+-EOF
+-	  $rm conftest
+-      if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+-	    ldd_output=`ldd conftest`
+-	    for i in $deplibs; do
+-	      name=`expr $i : '-l\(.*\)'`
+-	      # If $name is empty we are operating on a -L argument.
+-              if test "$name" != "" && test "$name" != "0"; then
+-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		  case " $predeps $postdeps " in
+-		  *" $i "*)
+-		    newdeplibs="$newdeplibs $i"
+-		    i=""
+-		    ;;
+-		  esac
+-	        fi
+-		if test -n "$i" ; then
+-		  libname=`eval \\$echo \"$libname_spec\"`
+-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		  set dummy $deplib_matches
+-		  deplib_match=$2
+-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		    newdeplibs="$newdeplibs $i"
+-		  else
+-		    droppeddeps=yes
+-		    $echo
+-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+-		    $echo "*** I have the capability to make that library automatically link in when"
+-		    $echo "*** you link to this library.  But I can only do this if you have a"
+-		    $echo "*** shared version of the library, which I believe you do not have"
+-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+-		  fi
+-		fi
+-	      else
+-		newdeplibs="$newdeplibs $i"
+-	      fi
+-	    done
++      case $host in
++      *-darwin*)
++	func_verbose "Extracting $my_xabs"
++	# Do not bother doing anything if just a dry run
++	$opt_dry_run || {
++	  darwin_orig_dir=`pwd`
++	  cd $my_xdir || exit $?
++	  darwin_archive=$my_xabs
++	  darwin_curdir=`pwd`
++	  darwin_base_archive=`basename "$darwin_archive"`
++	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
++	  if test -n "$darwin_arches"; then
++	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
++	    darwin_arch=
++	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
++	    for darwin_arch in  $darwin_arches ; do
++	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++	      cd "$darwin_curdir"
++	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++	    done # $darwin_arches
++            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
++	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
++	    darwin_file=
++	    darwin_files=
++	    for darwin_file in $darwin_filelist; do
++	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
++	      $LIPO -create -output "$darwin_file" $darwin_files
++	    done # $darwin_filelist
++	    $RM -rf unfat-$$
++	    cd "$darwin_orig_dir"
+ 	  else
+-	    # Error occurred in the first compile.  Let's try to salvage
+-	    # the situation: Compile a separate program for each library.
+-	    for i in $deplibs; do
+-	      name=`expr $i : '-l\(.*\)'`
+-	      # If $name is empty we are operating on a -L argument.
+-              if test "$name" != "" && test "$name" != "0"; then
+-		$rm conftest
+-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+-		  ldd_output=`ldd conftest`
+-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		    case " $predeps $postdeps " in
+-		    *" $i "*)
+-		      newdeplibs="$newdeplibs $i"
+-		      i=""
+-		      ;;
+-		    esac
+-		  fi
+-		  if test -n "$i" ; then
+-		    libname=`eval \\$echo \"$libname_spec\"`
+-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		    set dummy $deplib_matches
+-		    deplib_match=$2
+-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		      newdeplibs="$newdeplibs $i"
+-		    else
+-		      droppeddeps=yes
+-		      $echo
+-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+-		      $echo "*** I have the capability to make that library automatically link in when"
+-		      $echo "*** you link to this library.  But I can only do this if you have a"
+-		      $echo "*** shared version of the library, which you do not appear to have"
+-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+-		    fi
+-		  fi
+-		else
+-		  droppeddeps=yes
+-		  $echo
+-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  $echo "*** make it link in!  You will probably need to install it or some"
+-		  $echo "*** library that it depends on before this library will be fully"
+-		  $echo "*** functional.  Installing it before continuing would be even better."
+-		fi
+-	      else
+-		newdeplibs="$newdeplibs $i"
+-	      fi
+-	    done
+-	  fi
+-	  ;;
+-	file_magic*)
+-	  set dummy $deplibs_check_method
+-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name=`expr $a_deplib : '-l\(.*\)'`
+-	    # If $name is empty we are operating on a -L argument.
+-            if test "$name" != "" && test  "$name" != "0"; then
+-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		case " $predeps $postdeps " in
+-		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
+-		  a_deplib=""
+-		  ;;
+-		esac
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		libname=`eval \\$echo \"$libname_spec\"`
+-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		  for potent_lib in $potential_libs; do
+-		      # Follow soft links.
+-		      if ls -lLd "$potent_lib" 2>/dev/null \
+-			 | grep " -> " >/dev/null; then
+-			continue
+-		      fi
+-		      # The statement above tries to avoid entering an
+-		      # endless loop below, in case of cyclic links.
+-		      # We might still enter an endless loop, since a link
+-		      # loop can be closed while we follow links,
+-		      # but so what?
+-		      potlib="$potent_lib"
+-		      while test -h "$potlib" 2>/dev/null; do
+-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+-			case $potliblink in
+-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+-			esac
+-		      done
+-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+-			 | ${SED} 10q \
+-			 | $EGREP "$file_magic_regex" > /dev/null; then
+-			newdeplibs="$newdeplibs $a_deplib"
+-			a_deplib=""
+-			break 2
+-		      fi
+-		  done
+-		done
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		$echo
+-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+-		$echo "*** I have the capability to make that library automatically link in when"
+-		$echo "*** you link to this library.  But I can only do this if you have a"
+-		$echo "*** shared version of the library, which you do not appear to have"
+-		$echo "*** because I did check the linker path looking for a file starting"
+-		if test -z "$potlib" ; then
+-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+-		else
+-		  $echo "*** with $libname and none of the candidates passed a file format test"
+-		  $echo "*** using a file magic. Last file checked: $potlib"
+-		fi
+-	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
+-	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	match_pattern*)
+-	  set dummy $deplibs_check_method
+-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name=`expr $a_deplib : '-l\(.*\)'`
+-	    # If $name is empty we are operating on a -L argument.
+-	    if test -n "$name" && test "$name" != "0"; then
+-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-		case " $predeps $postdeps " in
+-		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
+-		  a_deplib=""
+-		  ;;
+-		esac
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		libname=`eval \\$echo \"$libname_spec\"`
+-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		  for potent_lib in $potential_libs; do
+-		    potlib="$potent_lib" # see symlink-check above in file_magic test
+-		    if eval $echo \"$potent_lib\" 2>/dev/null \
+-		        | ${SED} 10q \
+-		        | $EGREP "$match_pattern_regex" > /dev/null; then
+-		      newdeplibs="$newdeplibs $a_deplib"
+-		      a_deplib=""
+-		      break 2
+-		    fi
+-		  done
+-		done
+-	      fi
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		$echo
+-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+-		$echo "*** I have the capability to make that library automatically link in when"
+-		$echo "*** you link to this library.  But I can only do this if you have a"
+-		$echo "*** shared version of the library, which you do not appear to have"
+-		$echo "*** because I did check the linker path looking for a file starting"
+-		if test -z "$potlib" ; then
+-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+-		else
+-		  $echo "*** with $libname and none of the candidates passed a file format test"
+-		  $echo "*** using a regex pattern. Last file checked: $potlib"
+-		fi
+-	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
+-	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	none | unknown | *)
+-	  newdeplibs=""
+-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+-	    -e 's/ -[LR][^ ]*//g'`
+-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+-	    for i in $predeps $postdeps ; do
+-	      # can't use Xsed below, because $i might contain '/'
+-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+-	    done
+-	  fi
+-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+-	    | grep . >/dev/null; then
+-	    $echo
+-	    if test "X$deplibs_check_method" = "Xnone"; then
+-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+-	    else
+-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+-	    fi
+-	    $echo "*** All declared inter-library dependencies are being dropped."
+-	    droppeddeps=yes
+-	  fi
+-	  ;;
+-	esac
+-	versuffix=$versuffix_save
+-	major=$major_save
+-	release=$release_save
+-	libname=$libname_save
+-	name=$name_save
++	    cd $darwin_orig_dir
++	    func_extract_an_archive "$my_xdir" "$my_xabs"
++	  fi # $darwin_arches
++	} # !$opt_dry_run
++	;;
++      *)
++        func_extract_an_archive "$my_xdir" "$my_xabs"
++	;;
++      esac
++      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
++    done
+ 
+-	case $host in
+-	*-*-rhapsody* | *-*-darwin1.[012])
+-	  # On Rhapsody replace the C library is the System framework
+-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	  ;;
+-	esac
++    func_extract_archives_result="$my_oldobjs"
++}
+ 
+-	if test "$droppeddeps" = yes; then
+-	  if test "$module" = yes; then
+-	    $echo
+-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+-	    $echo "*** a static module, that should work as long as the dlopening"
+-	    $echo "*** application is linked with the -dlopen flag."
+-	    if test -z "$global_symbol_pipe"; then
+-	      $echo
+-	      $echo "*** However, this would only work if libtool was able to extract symbol"
+-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-	      $echo "*** not find such a program.  So, this module is probably useless."
+-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+-	    fi
+-	    if test "$build_old_libs" = no; then
+-	      oldlibs="$output_objdir/$libname.$libext"
+-	      build_libtool_libs=module
+-	      build_old_libs=yes
+-	    else
+-	      build_libtool_libs=no
+-	    fi
+-	  else
+-	    $echo "*** The inter-library dependencies that have been dropped here will be"
+-	    $echo "*** automatically added whenever a program is linked with this library"
+-	    $echo "*** or is declared to -dlopen it."
+ 
+-	    if test "$allow_undefined" = no; then
+-	      $echo
+-	      $echo "*** Since this library must not contain undefined symbols,"
+-	      $echo "*** because either the platform does not support them or"
+-	      $echo "*** it was explicitly requested with -no-undefined,"
+-	      $echo "*** libtool will only create a static version of it."
+-	      if test "$build_old_libs" = no; then
+-		oldlibs="$output_objdir/$libname.$libext"
+-		build_libtool_libs=module
+-		build_old_libs=yes
+-	      else
+-		build_libtool_libs=no
+-	      fi
+-	    fi
+-	  fi
+-	fi
+-	# Done checking deplibs!
+-	deplibs=$newdeplibs
+-      fi
++# func_emit_wrapper [arg=no]
++#
++# Emit a libtool wrapper script on stdout.
++# Don't directly open a file because we may want to
++# incorporate the script contents within a cygwin/mingw
++# wrapper executable.  Must ONLY be called from within
++# func_mode_link because it depends on a number of variables
++# set therein.
++#
++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
++# variable will take.  If 'yes', then the emitted script
++# will assume that the directory in which it is stored is
++# the $objdir directory.  This is a cygwin/mingw-specific
++# behavior.
++func_emit_wrapper ()
++{
++	func_emit_wrapper_arg1=${1-no}
+ 
++	$ECHO "\
++#! $SHELL
+ 
+-      # move library search paths that coincide with paths to not yet
+-      # installed libraries to the beginning of the library search list
+-      new_libs=
+-      for path in $notinst_path; do
+-	case " $new_libs " in
+-	*" -L$path/$objdir "*) ;;
+-	*)
+-	  case " $deplibs " in
+-	  *" -L$path/$objdir "*)
+-	    new_libs="$new_libs -L$path/$objdir" ;;
+-	  esac
+-	  ;;
+-	esac
+-      done
+-      for deplib in $deplibs; do
+-	case $deplib in
+-	-L*)
+-	  case " $new_libs " in
+-	  *" $deplib "*) ;;
+-	  *) new_libs="$new_libs $deplib" ;;
+-	  esac
+-	  ;;
+-	*) new_libs="$new_libs $deplib" ;;
+-	esac
+-      done
+-      deplibs="$new_libs"
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
+ 
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='$sed_quote_subst'
+ 
+-      # All the library-specific variables (install_libdir is set above).
+-      library_names=
+-      old_library=
+-      dlname=
++# Be Bourne compatible
++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '\${1+\"\$@\"}'='\"\$@\"'
++  setopt NO_GLOB_SUBST
++else
++  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
+ 
+-      # Test again, we may have decided not to build it any more
+-      if test "$build_libtool_libs" = yes; then
+-	if test "$hardcode_into_libs" = yes; then
+-	  # Hardcode the library paths
+-	  hardcode_libdirs=
+-	  dep_rpath=
+-	  rpath="$finalize_rpath"
+-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+-	  for libdir in $rpath; do
+-	    if test -n "$hardcode_libdir_flag_spec"; then
+-	      if test -n "$hardcode_libdir_separator"; then
+-		if test -z "$hardcode_libdirs"; then
+-		  hardcode_libdirs="$libdir"
+-		else
+-		  # Just accumulate the unique libdirs.
+-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		    ;;
+-		  *)
+-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		    ;;
+-		  esac
+-		fi
+-	      else
+-		eval flag=\"$hardcode_libdir_flag_spec\"
+-		dep_rpath="$dep_rpath $flag"
+-	      fi
+-	    elif test -n "$runpath_var"; then
+-	      case "$perm_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) perm_rpath="$perm_rpath $libdir" ;;
+-	      esac
+-	    fi
+-	  done
+-	  # Substitute the hardcoded libdirs into the rpath.
+-	  if test -n "$hardcode_libdir_separator" &&
+-	     test -n "$hardcode_libdirs"; then
+-	    libdir="$hardcode_libdirs"
+-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+-	    else
+-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+-	    fi
+-	  fi
+-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+-	    # We should set the runpath_var.
+-	    rpath=
+-	    for dir in $perm_rpath; do
+-	      rpath="$rpath$dir:"
+-	    done
+-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+-	  fi
+-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+-	fi
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+ 
+-	shlibpath="$finalize_shlibpath"
+-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+-	if test -n "$shlibpath"; then
+-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+-	fi
++relink_command=\"$relink_command\"
+ 
+-	# Get the real and link names of the library.
+-	eval shared_ext=\"$shrext_cmds\"
+-	eval library_names=\"$library_names_spec\"
+-	set dummy $library_names
+-	realname="$2"
+-	shift; shift
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++  # install mode needs the following variables:
++  generated_by_libtool_version='$macro_version'
++  notinst_deplibs='$notinst_deplibs'
++else
++  # When we are sourced in execute mode, \$file and \$ECHO are already set.
++  if test \"\$libtool_execute_magic\" != \"$magic\"; then
++    file=\"\$0\""
+ 
+-	if test -n "$soname_spec"; then
+-	  eval soname=\"$soname_spec\"
+-	else
+-	  soname="$realname"
+-	fi
+-	if test -z "$dlname"; then
+-	  dlname=$soname
+-	fi
++    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
++    $ECHO "\
+ 
+-	lib="$output_objdir/$realname"
+-	linknames=
+-	for link
+-	do
+-	  linknames="$linknames $link"
+-	done
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++    ECHO=\"$qECHO\"
++  fi
+ 
+-	# Use standard objects if they are pic
+-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++  lt_script_arg0=\$0
++  shift
++  for lt_opt
++  do
++    case \"\$lt_opt\" in
++    --lt-debug) lt_option_debug=1 ;;
++    --lt-dump-script)
++        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++        cat \"\$lt_dump_D/\$lt_dump_F\"
++        exit 0
++      ;;
++    --lt-*)
++        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++        exit 1
++      ;;
++    esac
++  done
+ 
+-	# Prepare the list of exported symbols
+-	if test -z "$export_symbols"; then
+-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+-	    $show "generating symbol list for \`$libname.la'"
+-	    export_symbols="$output_objdir/$libname.exp"
+-	    $run $rm $export_symbols
+-	    cmds=$export_symbols_cmds
+-	    save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
+-	      IFS="$save_ifs"
+-	      eval cmd=\"$cmd\"
+-	      if len=`expr "X$cmd" : ".*"` &&
+-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+-	        $show "$cmd"
+-	        $run eval "$cmd" || exit $?
+-	        skipped_export=false
+-	      else
+-	        # The command line is too long to execute in one step.
+-	        $show "using reloadable object file for export list..."
+-	        skipped_export=:
+-		# Break out early, otherwise skipped_export may be
+-		# set to false by a later but shorter cmd.
+-		break
+-	      fi
+-	    done
+-	    IFS="$save_ifs"
+-	    if test -n "$export_symbols_regex"; then
+-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+-	    fi
+-	  fi
+-	fi
++  # Print the debug banner immediately:
++  if test -n \"\$lt_option_debug\"; then
++    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++  fi
++}
+ 
+-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+-	fi
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++  lt_dump_args_N=1;
++  for lt_arg
++  do
++    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++  done
++}
+ 
+-	tmp_deplibs=
+-	for test_deplib in $deplibs; do
+-		case " $convenience " in
+-		*" $test_deplib "*) ;;
+-		*)
+-			tmp_deplibs="$tmp_deplibs $test_deplib"
+-			;;
+-		esac
+-	done
+-	deplibs="$tmp_deplibs"
++# Core function for launching the target application
++func_exec_program_core ()
++{
++"
++  case $host in
++  # Backslashes separate directories on plain windows
++  *-*-mingw | *-*-os2* | *-cegcc*)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++    ;;
+ 
+-	if test -n "$convenience"; then
+-	  if test -n "$whole_archive_flag_spec"; then
+-	    save_libobjs=$libobjs
+-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+-	  else
+-	    gentop="$output_objdir/${outputname}x"
+-	    generated="$generated $gentop"
++  *)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
++    ;;
++  esac
++  $ECHO "\
++      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++      exit 1
++}
+ 
+-	    func_extract_archives $gentop $convenience
+-	    libobjs="$libobjs $func_extract_archives_result"
+-	  fi
+-	fi
+-	
+-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+-	  eval flag=\"$thread_safe_flag_spec\"
+-	  linker_flags="$linker_flags $flag"
+-	fi
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++  case \" \$* \" in
++  *\\ --lt-*)
++    for lt_wr_arg
++    do
++      case \$lt_wr_arg in
++      --lt-*) ;;
++      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++      esac
++      shift
++    done ;;
++  esac
++  func_exec_program_core \${1+\"\$@\"}
++}
+ 
+-	# Make a backup of the uninstalled library when relinking
+-	if test "$mode" = relink; then
+-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+-	fi
++  # Parse options
++  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+ 
+-	# Do each of the archive commands.
+-	if test "$module" = yes && test -n "$module_cmds" ; then
+-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+-	    eval test_cmds=\"$module_expsym_cmds\"
+-	    cmds=$module_expsym_cmds
+-	  else
+-	    eval test_cmds=\"$module_cmds\"
+-	    cmds=$module_cmds
+-	  fi
+-	else
+-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	  eval test_cmds=\"$archive_expsym_cmds\"
+-	  cmds=$archive_expsym_cmds
+-	else
+-	  eval test_cmds=\"$archive_cmds\"
+-	  cmds=$archive_cmds
+-	  fi
+-	fi
++  # Find the directory that this script lives in.
++  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
++  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+ 
+-	if test "X$skipped_export" != "X:" &&
+-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+-	  :
+-	else
+-	  # The command line is too long to link in one step, link piecewise.
+-	  $echo "creating reloadable object files..."
++  # Follow symbolic links until we get to the real thisdir.
++  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
++  while test -n \"\$file\"; do
++    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+ 
+-	  # Save the value of $output and $libobjs because we want to
+-	  # use them later.  If we have whole_archive_flag_spec, we
+-	  # want to use save_libobjs as it was before
+-	  # whole_archive_flag_spec was expanded, because we can't
+-	  # assume the linker understands whole_archive_flag_spec.
+-	  # This may have to be revisited, in case too many
+-	  # convenience libraries get linked in and end up exceeding
+-	  # the spec.
+-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+-	    save_libobjs=$libobjs
+-	  fi
+-	  save_output=$output
+-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
++    # If there was a directory component, then change thisdir.
++    if test \"x\$destdir\" != \"x\$file\"; then
++      case \"\$destdir\" in
++      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++      *) thisdir=\"\$thisdir/\$destdir\" ;;
++      esac
++    fi
+ 
+-	  # Clear the reloadable object creation command queue and
+-	  # initialize k to one.
+-	  test_cmds=
+-	  concat_cmds=
+-	  objlist=
+-	  delfiles=
+-	  last_robj=
+-	  k=1
+-	  output=$output_objdir/$output_la-${k}.$objext
+-	  # Loop over the list of objects to be linked.
+-	  for obj in $save_libobjs
+-	  do
+-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+-	    if test "X$objlist" = X ||
+-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+-		 test "$len" -le "$max_cmd_len"; }; then
+-	      objlist="$objlist $obj"
+-	    else
+-	      # The command $test_cmds is almost too long, add a
+-	      # command to the queue.
+-	      if test "$k" -eq 1 ; then
+-		# The first file doesn't have a previous command to add.
+-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+-	      else
+-		# All subsequent reloadable object files will link in
+-		# the last one created.
+-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+-	      fi
+-	      last_robj=$output_objdir/$output_la-${k}.$objext
+-	      k=`expr $k + 1`
+-	      output=$output_objdir/$output_la-${k}.$objext
+-	      objlist=$obj
+-	      len=1
+-	    fi
+-	  done
+-	  # Handle the remaining objects by creating one last
+-	  # reloadable object file.  All subsequent reloadable object
+-	  # files will link in the last one created.
+-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
++    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
++  done
+ 
+-	  if ${skipped_export-false}; then
+-	    $show "generating symbol list for \`$libname.la'"
+-	    export_symbols="$output_objdir/$libname.exp"
+-	    $run $rm $export_symbols
+-	    libobjs=$output
+-	    # Append the command to create the export file.
+-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+-          fi
+-
+-	  # Set up a command to remove the reloadable object files
+-	  # after they are used.
+-	  i=0
+-	  while test "$i" -lt "$k"
+-	  do
+-	    i=`expr $i + 1`
+-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+-	  done
++  # Usually 'no', except on cygwin/mingw when embedded into
++  # the cwrapper.
++  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
++  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
++    # special case for '.'
++    if test \"\$thisdir\" = \".\"; then
++      thisdir=\`pwd\`
++    fi
++    # remove .libs from thisdir
++    case \"\$thisdir\" in
++    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
++    $objdir )   thisdir=. ;;
++    esac
++  fi
+ 
+-	  $echo "creating a temporary reloadable object file: $output"
++  # Try to get the absolute directory name.
++  absdir=\`cd \"\$thisdir\" && pwd\`
++  test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
+ 
+-	  # Loop through the commands generated above and execute them.
+-	  save_ifs="$IFS"; IFS='~'
+-	  for cmd in $concat_cmds; do
+-	    IFS="$save_ifs"
+-	    $show "$cmd"
+-	    $run eval "$cmd" || exit $?
+-	  done
+-	  IFS="$save_ifs"
++	if test "$fast_install" = yes; then
++	  $ECHO "\
++  program=lt-'$outputname'$exeext
++  progdir=\"\$thisdir/$objdir\"
+ 
+-	  libobjs=$output
+-	  # Restore the value of output.
+-	  output=$save_output
++  if test ! -f \"\$progdir/\$program\" ||
++     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
++       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+ 
+-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+-	  fi
+-	  # Expand the library linking commands again to reset the
+-	  # value of $libobjs for piecewise linking.
++    file=\"\$\$-\$program\"
+ 
+-	  # Do each of the archive commands.
+-	  if test "$module" = yes && test -n "$module_cmds" ; then
+-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+-	      cmds=$module_expsym_cmds
+-	    else
+-	      cmds=$module_cmds
+-	    fi
+-	  else
+-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	    cmds=$archive_expsym_cmds
+-	  else
+-	    cmds=$archive_cmds
+-	    fi
+-	  fi
++    if test ! -d \"\$progdir\"; then
++      $MKDIR \"\$progdir\"
++    else
++      $RM \"\$progdir/\$file\"
++    fi"
+ 
+-	  # Append the command to remove the reloadable object files
+-	  # to the just-reset $cmds.
+-	  eval cmds=\"\$cmds~\$rm $delfiles\"
+-	fi
+-	save_ifs="$IFS"; IFS='~'
+-	for cmd in $cmds; do
+-	  IFS="$save_ifs"
+-	  eval cmd=\"$cmd\"
+-	  $show "$cmd"
+-	  $run eval "$cmd" || {
+-	    lt_exit=$?
++	  $ECHO "\
+ 
+-	    # Restore the uninstalled library and exit
+-	    if test "$mode" = relink; then
+-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+-	    fi
++    # relink executable if necessary
++    if test -n \"\$relink_command\"; then
++      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
++      else
++	$ECHO \"\$relink_command_output\" >&2
++	$RM \"\$progdir/\$file\"
++	exit 1
++      fi
++    fi
+ 
+-	    exit $lt_exit
+-	  }
+-	done
+-	IFS="$save_ifs"
++    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++    { $RM \"\$progdir/\$program\";
++      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++    $RM \"\$progdir/\$file\"
++  fi"
++	else
++	  $ECHO "\
++  program='$outputname'
++  progdir=\"\$thisdir/$objdir\"
++"
++	fi
+ 
+-	# Restore the uninstalled library and exit
+-	if test "$mode" = relink; then
+-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
++	$ECHO "\
+ 
+-	  if test -n "$convenience"; then
+-	    if test -z "$whole_archive_flag_spec"; then
+-	      $show "${rm}r $gentop"
+-	      $run ${rm}r "$gentop"
+-	    fi
+-	  fi
++  if test -f \"\$progdir/\$program\"; then"
+ 
+-	  exit $EXIT_SUCCESS
++	# fixup the dll searchpath if we need to.
++	#
++	# Fix the DLL searchpath if we need to.  Do this before prepending
++	# to shlibpath, because on Windows, both are PATH and uninstalled
++	# libraries must come first.
++	if test -n "$dllsearchpath"; then
++	  $ECHO "\
++    # Add the dll search path components to the executable PATH
++    PATH=$dllsearchpath:\$PATH
++"
+ 	fi
+ 
+-	# Create links to the real library.
+-	for linkname in $linknames; do
+-	  if test "$realname" != "$linkname"; then
+-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+-	  fi
+-	done
++	# Export our shlibpath_var if we have one.
++	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++	  $ECHO "\
++    # Add our own library path to $shlibpath_var
++    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+ 
+-	# If -module or -export-dynamic was specified, set the dlname.
+-	if test "$module" = yes || test "$export_dynamic" = yes; then
+-	  # On all known operating systems, these are identical.
+-	  dlname="$soname"
+-	fi
+-      fi
+-      ;;
++    # Some systems cannot cope with colon-terminated $shlibpath_var
++    # The second colon is a workaround for a bug in BeOS R4 sed
++    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+ 
+-    obj)
+-      if test -n "$deplibs"; then
+-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+-      fi
++    export $shlibpath_var
++"
++	fi
+ 
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+-      fi
++	$ECHO "\
++    if test \"\$libtool_execute_magic\" != \"$magic\"; then
++      # Run the actual program with our arguments.
++      func_exec_program \${1+\"\$@\"}
++    fi
++  else
++    # The program doesn't exist.
++    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
++    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
++    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
++    exit 1
++  fi
++fi\
++"
++}
+ 
+-      if test -n "$rpath"; then
+-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+-      fi
+ 
+-      if test -n "$xrpath"; then
+-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+-      fi
++# func_emit_cwrapperexe_src
++# emit the source code for a wrapper executable on stdout
++# Must ONLY be called from within func_mode_link because
++# it depends on a number of variable set therein.
++func_emit_cwrapperexe_src ()
++{
++	cat <<EOF
+ 
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+-      fi
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+-      fi
++   The $output program cannot be directly executed until all the libtool
++   libraries that it depends on are installed.
+ 
+-      case $output in
+-      *.lo)
+-	if test -n "$objs$old_deplibs"; then
+-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
+-	libobj="$output"
+-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+-	;;
+-      *)
+-	libobj=
+-	obj="$output"
+-	;;
+-      esac
++   This wrapper executable should never be moved out of the build directory.
++   If it is, it will not operate correctly.
++*/
++EOF
++	    cat <<"EOF"
++#ifdef _MSC_VER
++# define _CRT_SECURE_NO_DEPRECATE 1
++#endif
++#include <stdio.h>
++#include <stdlib.h>
++#ifdef _MSC_VER
++# include <direct.h>
++# include <process.h>
++# include <io.h>
++#else
++# include <unistd.h>
++# include <stdint.h>
++# ifdef __CYGWIN__
++#  include <io.h>
++# endif
++#endif
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <errno.h>
++#include <fcntl.h>
++#include <sys/stat.h>
+ 
+-      # Delete the old objects.
+-      $run $rm $obj $libobj
++/* declarations of non-ANSI functions */
++#if defined(__MINGW32__)
++# ifdef __STRICT_ANSI__
++int _putenv (const char *);
++# endif
++#elif defined(__CYGWIN__)
++# ifdef __STRICT_ANSI__
++char *realpath (const char *, char *);
++int putenv (char *);
++int setenv (const char *, const char *, int);
++# endif
++/* #elif defined (other platforms) ... */
++#endif
+ 
+-      # Objects from convenience libraries.  This assumes
+-      # single-version convenience libraries.  Whenever we create
+-      # different ones for PIC/non-PIC, this we'll have to duplicate
+-      # the extraction.
+-      reload_conv_objs=
+-      gentop=
+-      # reload_cmds runs $LD directly, so let us get rid of
+-      # -Wl from whole_archive_flag_spec and hope we can get by with
+-      # turning comma into space..
+-      wl=
++/* portability defines, excluding path handling macros */
++#if defined(_MSC_VER)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++# define S_IXUSR _S_IEXEC
++# ifndef _INTPTR_T_DEFINED
++#  define _INTPTR_T_DEFINED
++#  define intptr_t int
++# endif
++#elif defined(__MINGW32__)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++#elif defined(__CYGWIN__)
++# define HAVE_SETENV
++# define FOPEN_WB "wb"
++/* #elif defined (other platforms) ... */
++#endif
+ 
+-      if test -n "$convenience"; then
+-	if test -n "$whole_archive_flag_spec"; then
+-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+-      reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+-	else
+-	  gentop="$output_objdir/${obj}x"
+-	  generated="$generated $gentop"
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
+ 
+-	  func_extract_archives $gentop $convenience
+-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+-	fi
+-      fi
++#ifndef S_IXOTH
++# define S_IXOTH 0
++#endif
++#ifndef S_IXGRP
++# define S_IXGRP 0
++#endif
+ 
+-      # Create the old-style object.
+-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++/* path handling portability macros */
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
+ 
+-      output="$obj"
+-      cmds=$reload_cmds
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-	IFS="$save_ifs"
+-	eval cmd=\"$cmd\"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++  defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# define FOPEN_WB "wb"
++# ifndef DIR_SEPARATOR_2
++#  define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++#  define PATH_SEPARATOR_2 ';'
++# endif
++#endif
+ 
+-      # Exit if we aren't doing a library object file.
+-      if test -z "$libobj"; then
+-	if test -n "$gentop"; then
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r $gentop
+-	fi
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
+ 
+-	exit $EXIT_SUCCESS
+-      fi
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
+ 
+-      if test "$build_libtool_libs" != yes; then
+-	if test -n "$gentop"; then
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r $gentop
+-	fi
++#ifndef FOPEN_WB
++# define FOPEN_WB "w"
++#endif
++#ifndef _O_BINARY
++# define _O_BINARY 0
++#endif
+ 
+-	# Create an invalid libtool object if no PIC, so that we don't
+-	# accidentally link it into a program.
+-	# $show "echo timestamp > $libobj"
+-	# $run eval "echo timestamp > $libobj" || exit $?
+-	exit $EXIT_SUCCESS
+-      fi
++#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++  if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
+ 
+-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+-	# Only do commands if we really have different PIC objects.
+-	reload_objs="$libobjs $reload_conv_objs"
+-	output="$libobj"
+-	cmds=$reload_cmds
+-	save_ifs="$IFS"; IFS='~'
+-	for cmd in $cmds; do
+-	  IFS="$save_ifs"
+-	  eval cmd=\"$cmd\"
+-	  $show "$cmd"
+-	  $run eval "$cmd" || exit $?
+-	done
+-	IFS="$save_ifs"
+-      fi
++#if defined(LT_DEBUGWRAPPER)
++static int lt_debug = 1;
++#else
++static int lt_debug = 0;
++#endif
+ 
+-      if test -n "$gentop"; then
+-	$show "${rm}r $gentop"
+-	$run ${rm}r $gentop
+-      fi
++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+ 
+-      exit $EXIT_SUCCESS
+-      ;;
++void *xmalloc (size_t num);
++char *xstrdup (const char *string);
++const char *base_name (const char *name);
++char *find_executable (const char *wrapper);
++char *chase_symlinks (const char *pathspec);
++int make_executable (const char *path);
++int check_executable (const char *path);
++char *strendzap (char *str, const char *pat);
++void lt_debugprintf (const char *file, int line, const char *fmt, ...);
++void lt_fatal (const char *file, int line, const char *message, ...);
++static const char *nonnull (const char *s);
++static const char *nonempty (const char *s);
++void lt_setenv (const char *name, const char *value);
++char *lt_extend_str (const char *orig_value, const char *add, int to_end);
++void lt_update_exe_path (const char *name, const char *value);
++void lt_update_lib_path (const char *name, const char *value);
++char **prepare_spawn (char **argv);
++void lt_dump_script (FILE *f);
++EOF
+ 
+-    prog)
+-      case $host in
+-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+-      esac
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+-      fi
++	    cat <<EOF
++volatile const char * MAGIC_EXE = "$magic_exe";
++const char * LIB_PATH_VARNAME = "$shlibpath_var";
++EOF
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+-      fi
++	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++              func_to_host_path "$temp_rpath"
++	      cat <<EOF
++const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
++EOF
++	    else
++	      cat <<"EOF"
++const char * LIB_PATH_VALUE   = "";
++EOF
++	    fi
+ 
+-      if test "$preload" = yes; then
+-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+-	   test "$dlopen_self_static" = unknown; then
+-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+-	fi
+-      fi
++	    if test -n "$dllsearchpath"; then
++              func_to_host_path "$dllsearchpath:"
++	      cat <<EOF
++const char * EXE_PATH_VARNAME = "PATH";
++const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
++EOF
++	    else
++	      cat <<"EOF"
++const char * EXE_PATH_VARNAME = "";
++const char * EXE_PATH_VALUE   = "";
++EOF
++	    fi
+ 
+-      case $host in
+-      *-*-rhapsody* | *-*-darwin1.[012])
+-	# On Rhapsody replace the C library is the System framework
+-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	;;
+-      esac
++	    if test "$fast_install" = yes; then
++	      cat <<EOF
++const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
++EOF
++	    else
++	      cat <<EOF
++const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
++EOF
++	    fi
+ 
+-      case $host in
+-      *darwin*)
+-        # Don't allow lazy linking, it breaks C++ global constructors
+-        if test "$tagname" = CXX ; then
+-        compile_command="$compile_command ${wl}-bind_at_load"
+-        finalize_command="$finalize_command ${wl}-bind_at_load"
+-        fi
+-        ;;
+-      esac
+ 
++	    cat <<"EOF"
+ 
+-      # move library search paths that coincide with paths to not yet
+-      # installed libraries to the beginning of the library search list
+-      new_libs=
+-      for path in $notinst_path; do
+-	case " $new_libs " in
+-	*" -L$path/$objdir "*) ;;
+-	*)
+-	  case " $compile_deplibs " in
+-	  *" -L$path/$objdir "*)
+-	    new_libs="$new_libs -L$path/$objdir" ;;
+-	  esac
+-	  ;;
+-	esac
+-      done
+-      for deplib in $compile_deplibs; do
+-	case $deplib in
+-	-L*)
+-	  case " $new_libs " in
+-	  *" $deplib "*) ;;
+-	  *) new_libs="$new_libs $deplib" ;;
+-	  esac
+-	  ;;
+-	*) new_libs="$new_libs $deplib" ;;
+-	esac
+-      done
+-      compile_deplibs="$new_libs"
++#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+ 
++static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
++static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
++static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+ 
+-      compile_command="$compile_command $compile_deplibs"
+-      finalize_command="$finalize_command $finalize_deplibs"
++int
++main (int argc, char *argv[])
++{
++  char **newargz;
++  int  newargc;
++  char *tmp_pathspec;
++  char *actual_cwrapper_path;
++  char *actual_cwrapper_name;
++  char *target_name;
++  char *lt_argv_zero;
++  intptr_t rval = 127;
+ 
+-      if test -n "$rpath$xrpath"; then
+-	# If the user specified any rpath flags, then add them.
+-	for libdir in $rpath $xrpath; do
+-	  # This is the magic to use -rpath.
+-	  case "$finalize_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+-	  esac
+-	done
+-      fi
++  int i;
+ 
+-      # Now hardcode the library paths
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $compile_rpath $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
+-	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		;;
+-	      esac
+-	    fi
+-	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) perm_rpath="$perm_rpath $libdir" ;;
+-	  esac
+-	fi
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+-	  case :$dllsearchpath: in
+-	  *":$libdir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$libdir";;
+-	  esac
+-	  case :$dllsearchpath: in
+-	  *":$testbindir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+-	  esac
+-	  ;;
+-	esac
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      compile_rpath="$rpath"
++  program_name = (char *) xstrdup (base_name (argv[0]));
++  newargz = XMALLOC (char *, argc + 1);
+ 
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
+-	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++  /* very simple arg parsing; don't want to rely on getopt
++   * also, copy all non cwrapper options to newargz, except
++   * argz[0], which is handled differently
++   */
++  newargc=0;
++  for (i = 1; i < argc; i++)
++    {
++      if (strcmp (argv[i], dumpscript_opt) == 0)
++	{
++EOF
++	    case "$host" in
++	      *mingw* | *cygwin* )
++		# make stdout use "unix" line endings
++		echo "          setmode(1,_O_BINARY);"
+ 		;;
+ 	      esac
+-	    fi
+-	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$finalize_perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+-	  esac
+-	fi
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      finalize_rpath="$rpath"
+-
+-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+-	# Transform all the library objects into standard objects.
+-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-      fi
+ 
+-      dlsyms=
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+-	  dlsyms="${outputname}S.c"
+-	else
+-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+-	fi
+-      fi
++	    cat <<"EOF"
++	  lt_dump_script (stdout);
++	  return 0;
++	}
++      if (strcmp (argv[i], debug_opt) == 0)
++	{
++          lt_debug = 1;
++          continue;
++	}
++      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
++        {
++          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
++             namespace, but it is not one of the ones we know about and
++             have already dealt with, above (inluding dump-script), then
++             report an error. Otherwise, targets might begin to believe
++             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
++             namespace. The first time any user complains about this, we'll
++             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
++             or a configure.ac-settable value.
++           */
++          lt_fatal (__FILE__, __LINE__,
++		    "unrecognized %s option: '%s'",
++                    ltwrapper_option_prefix, argv[i]);
++        }
++      /* otherwise ... */
++      newargz[++newargc] = xstrdup (argv[i]);
++    }
++  newargz[++newargc] = NULL;
+ 
+-      if test -n "$dlsyms"; then
+-	case $dlsyms in
+-	"") ;;
+-	*.c)
+-	  # Discover the nlist of each of the dlfiles.
+-	  nlist="$output_objdir/${outputname}.nm"
++EOF
++	    cat <<EOF
++  /* The GNU banner must be the first non-error debug message */
++  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
++EOF
++	    cat <<"EOF"
++  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
++
++  tmp_pathspec = find_executable (argv[0]);
++  if (tmp_pathspec == NULL)
++    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (before symlink chase) at: %s\n",
++		  tmp_pathspec);
++
++  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (after symlink chase) at: %s\n",
++		  actual_cwrapper_path);
++  XFREE (tmp_pathspec);
++
++  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
++  strendzap (actual_cwrapper_path, actual_cwrapper_name);
++
++  /* wrapper name transforms */
++  strendzap (actual_cwrapper_name, ".exe");
++  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
++  XFREE (actual_cwrapper_name);
++  actual_cwrapper_name = tmp_pathspec;
++  tmp_pathspec = 0;
++
++  /* target_name transforms -- use actual target program name; might have lt- prefix */
++  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
++  strendzap (target_name, ".exe");
++  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
++  XFREE (target_name);
++  target_name = tmp_pathspec;
++  tmp_pathspec = 0;
++
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(main) libtool target name: %s\n",
++		  target_name);
++EOF
+ 
+-	  $show "$rm $nlist ${nlist}S ${nlist}T"
+-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
++	    cat <<EOF
++  newargz[0] =
++    XMALLOC (char, (strlen (actual_cwrapper_path) +
++		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
++  strcpy (newargz[0], actual_cwrapper_path);
++  strcat (newargz[0], "$objdir");
++  strcat (newargz[0], "/");
++EOF
+ 
+-	  # Parse the name list into a source file.
+-	  $show "creating $output_objdir/$dlsyms"
++	    cat <<"EOF"
++  /* stop here, and copy so we don't have to do this twice */
++  tmp_pathspec = xstrdup (newargz[0]);
++
++  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
++  strcat (newargz[0], actual_cwrapper_name);
++
++  /* DO want the lt- prefix here if it exists, so use target_name */
++  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
++  XFREE (tmp_pathspec);
++  tmp_pathspec = NULL;
++EOF
+ 
+-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
++	    case $host_os in
++	      mingw*)
++	    cat <<"EOF"
++  {
++    char* p;
++    while ((p = strchr (newargz[0], '\\')) != NULL)
++      {
++	*p = '/';
++      }
++    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
++      {
++	*p = '/';
++      }
++  }
++EOF
++	    ;;
++	    esac
+ 
+-#ifdef __cplusplus
+-extern \"C\" {
+-#endif
++	    cat <<"EOF"
++  XFREE (target_name);
++  XFREE (actual_cwrapper_path);
++  XFREE (actual_cwrapper_name);
++
++  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
++  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
++  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
++     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
++     because on Windows, both *_VARNAMEs are PATH but uninstalled
++     libraries must come first. */
++  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
++  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
++
++  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
++		  nonnull (lt_argv_zero));
++  for (i = 0; i < newargc; i++)
++    {
++      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
++		      i, nonnull (newargz[i]));
++    }
+ 
+-/* Prevent the only kind of declaration conflicts we can make. */
+-#define lt_preloaded_symbols some_other_symbol
++EOF
+ 
+-/* External symbol declarations for the compiler. */\
+-"
+-
+-	  if test "$dlself" = yes; then
+-	    $show "generating symbol list for \`$output'"
+-
+-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
++	    case $host_os in
++	      mingw*)
++		cat <<"EOF"
++  /* execv doesn't actually work on mingw as expected on unix */
++  newargz = prepare_spawn (newargz);
++  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
++  if (rval == -1)
++    {
++      /* failed to start process */
++      lt_debugprintf (__FILE__, __LINE__,
++		      "(main) failed to launch target \"%s\": %s\n",
++		      lt_argv_zero, nonnull (strerror (errno)));
++      return 127;
++    }
++  return rval;
++EOF
++		;;
++	      *)
++		cat <<"EOF"
++  execv (lt_argv_zero, newargz);
++  return rval; /* =127, but avoids unused variable warning */
++EOF
++		;;
++	    esac
+ 
+-	    # Add our own program objects to the symbol list.
+-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	    for arg in $progfiles; do
+-	      $show "extracting global C symbols from \`$arg'"
+-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+-	    done
++	    cat <<"EOF"
++}
+ 
+-	    if test -n "$exclude_expsyms"; then
+-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+-	      $run eval '$mv "$nlist"T "$nlist"'
+-	    fi
+-
+-	    if test -n "$export_symbols_regex"; then
+-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+-	      $run eval '$mv "$nlist"T "$nlist"'
+-	    fi
+-
+-	    # Prepare the list of exported symbols
+-	    if test -z "$export_symbols"; then
+-	      export_symbols="$output_objdir/$outputname.exp"
+-	      $run $rm $export_symbols
+-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+-              case $host in
+-              *cygwin* | *mingw* )
+-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+-                ;;
+-              esac
+-	    else
+-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+-	      $run eval 'mv "$nlist"T "$nlist"'
+-              case $host in
+-              *cygwin* | *mingw* )
+-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+-                ;;
+-              esac
+-	    fi
+-	  fi
++void *
++xmalloc (size_t num)
++{
++  void *p = (void *) malloc (num);
++  if (!p)
++    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+ 
+-	  for arg in $dlprefiles; do
+-	    $show "extracting global C symbols from \`$arg'"
+-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+-	    $run eval '$echo ": $name " >> "$nlist"'
+-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+-	  done
++  return p;
++}
+ 
+-	  if test -z "$run"; then
+-	    # Make sure we have at least an empty file.
+-	    test -f "$nlist" || : > "$nlist"
+-
+-	    if test -n "$exclude_expsyms"; then
+-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+-	      $mv "$nlist"T "$nlist"
+-	    fi
++char *
++xstrdup (const char *string)
++{
++  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
++			  string) : NULL;
++}
+ 
+-	    # Try sorting and uniquifying the output.
+-	    if grep -v "^: " < "$nlist" |
+-		if sort -k 3 </dev/null >/dev/null 2>&1; then
+-		  sort -k 3
+-		else
+-		  sort +2
+-		fi |
+-		uniq > "$nlist"S; then
+-	      :
+-	    else
+-	      grep -v "^: " < "$nlist" > "$nlist"S
+-	    fi
++const char *
++base_name (const char *name)
++{
++  const char *base;
+ 
+-	    if test -f "$nlist"S; then
+-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+-	    else
+-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+-	    fi
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  /* Skip over the disk name in MSDOS pathnames. */
++  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
++    name += 2;
++#endif
+ 
+-	    $echo >> "$output_objdir/$dlsyms" "\
++  for (base = name; *name; name++)
++    if (IS_DIR_SEPARATOR (*name))
++      base = name + 1;
++  return base;
++}
+ 
+-#undef lt_preloaded_symbols
++int
++check_executable (const char *path)
++{
++  struct stat st;
+ 
+-#if defined (__STDC__) && __STDC__
+-# define lt_ptr void *
+-#else
+-# define lt_ptr char *
+-# define const
+-#endif
++  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
++                  nonempty (path));
++  if ((!path) || (!*path))
++    return 0;
+ 
+-/* The mapping between symbol names and symbols. */
+-"
++  if ((stat (path, &st) >= 0)
++      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
++    return 1;
++  else
++    return 0;
++}
+ 
+-	    case $host in
+-	    *cygwin* | *mingw* )
+-	  $echo >> "$output_objdir/$dlsyms" "\
+-/* DATA imports from DLLs on WIN32 can't be const, because
+-   runtime relocations are performed -- see ld's documentation
+-   on pseudo-relocs */
+-struct {
+-"
+-	      ;;
+-	    * )
+-	  $echo >> "$output_objdir/$dlsyms" "\
+-const struct {
+-"
+-	      ;;
+-	    esac
++int
++make_executable (const char *path)
++{
++  int rval = 0;
++  struct stat st;
+ 
++  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
++                  nonempty (path));
++  if ((!path) || (!*path))
++    return 0;
+ 
+-	  $echo >> "$output_objdir/$dlsyms" "\
+-  const char *name;
+-  lt_ptr address;
++  if (stat (path, &st) >= 0)
++    {
++      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
++    }
++  return rval;
+ }
+-lt_preloaded_symbols[] =
+-{\
+-"
+ 
+-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
++/* Searches for the full path of the wrapper.  Returns
++   newly allocated full path name if found, NULL otherwise
++   Does not chase symlinks, even on platforms that support them.
++*/
++char *
++find_executable (const char *wrapper)
++{
++  int has_slash = 0;
++  const char *p;
++  const char *p_next;
++  /* static buffer for getcwd */
++  char tmp[LT_PATHMAX + 1];
++  int tmp_len;
++  char *concat_name;
++
++  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
++                  nonempty (wrapper));
+ 
+-	    $echo >> "$output_objdir/$dlsyms" "\
+-  {0, (lt_ptr) 0}
+-};
++  if ((wrapper == NULL) || (*wrapper == '\0'))
++    return NULL;
+ 
+-/* This works around a problem in FreeBSD linker */
+-#ifdef FREEBSD_WORKAROUND
+-static const void *lt_preloaded_setup() {
+-  return lt_preloaded_symbols;
+-}
++  /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
++    {
++      concat_name = xstrdup (wrapper);
++      if (check_executable (concat_name))
++	return concat_name;
++      XFREE (concat_name);
++    }
++  else
++    {
++#endif
++      if (IS_DIR_SEPARATOR (wrapper[0]))
++	{
++	  concat_name = xstrdup (wrapper);
++	  if (check_executable (concat_name))
++	    return concat_name;
++	  XFREE (concat_name);
++	}
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++    }
+ #endif
+ 
+-#ifdef __cplusplus
+-}
+-#endif\
+-"
+-	  fi
++  for (p = wrapper; *p; p++)
++    if (*p == '/')
++      {
++	has_slash = 1;
++	break;
++      }
++  if (!has_slash)
++    {
++      /* no slashes; search PATH */
++      const char *path = getenv ("PATH");
++      if (path != NULL)
++	{
++	  for (p = path; *p; p = p_next)
++	    {
++	      const char *q;
++	      size_t p_len;
++	      for (q = p; *q; q++)
++		if (IS_PATH_SEPARATOR (*q))
++		  break;
++	      p_len = q - p;
++	      p_next = (*q == '\0' ? q : q + 1);
++	      if (p_len == 0)
++		{
++		  /* empty path: current directory */
++		  if (getcwd (tmp, LT_PATHMAX) == NULL)
++		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++                              nonnull (strerror (errno)));
++		  tmp_len = strlen (tmp);
++		  concat_name =
++		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++		  memcpy (concat_name, tmp, tmp_len);
++		  concat_name[tmp_len] = '/';
++		  strcpy (concat_name + tmp_len + 1, wrapper);
++		}
++	      else
++		{
++		  concat_name =
++		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
++		  memcpy (concat_name, p, p_len);
++		  concat_name[p_len] = '/';
++		  strcpy (concat_name + p_len + 1, wrapper);
++		}
++	      if (check_executable (concat_name))
++		return concat_name;
++	      XFREE (concat_name);
++	    }
++	}
++      /* not found in PATH; assume curdir */
++    }
++  /* Relative path | not found in path: prepend cwd */
++  if (getcwd (tmp, LT_PATHMAX) == NULL)
++    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++              nonnull (strerror (errno)));
++  tmp_len = strlen (tmp);
++  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++  memcpy (concat_name, tmp, tmp_len);
++  concat_name[tmp_len] = '/';
++  strcpy (concat_name + tmp_len + 1, wrapper);
+ 
+-	  pic_flag_for_symtable=
+-	  case $host in
+-	  # compiling the symbol table file with pic_flag works around
+-	  # a FreeBSD bug that causes programs to crash when -lm is
+-	  # linked before any other PIC object.  But we must not use
+-	  # pic_flag when linking with -static.  The problem exists in
+-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+-	    case "$compile_command " in
+-	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+-	    esac;;
+-	  *-*-hpux*)
+-	    case "$compile_command " in
+-	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag";;
+-	    esac
+-	  esac
++  if (check_executable (concat_name))
++    return concat_name;
++  XFREE (concat_name);
++  return NULL;
++}
+ 
+-	  # Now compile the dynamic symbol file.
+-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+-
+-	  # Clean up the generated files.
+-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
++char *
++chase_symlinks (const char *pathspec)
++{
++#ifndef S_ISLNK
++  return xstrdup (pathspec);
++#else
++  char buf[LT_PATHMAX];
++  struct stat s;
++  char *tmp_pathspec = xstrdup (pathspec);
++  char *p;
++  int has_symlinks = 0;
++  while (strlen (tmp_pathspec) && !has_symlinks)
++    {
++      lt_debugprintf (__FILE__, __LINE__,
++		      "checking path component for symlinks: %s\n",
++		      tmp_pathspec);
++      if (lstat (tmp_pathspec, &s) == 0)
++	{
++	  if (S_ISLNK (s.st_mode) != 0)
++	    {
++	      has_symlinks = 1;
++	      break;
++	    }
+ 
+-	  # Transform the symbol file into the correct name.
+-          case $host in
+-          *cygwin* | *mingw* )
+-            if test -f "$output_objdir/${outputname}.def" ; then
+-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-            else
+-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-             fi
+-            ;;
+-          * )
+-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+-            ;;
+-          esac
+-	  ;;
+-	*)
+-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
++	  /* search backwards for last DIR_SEPARATOR */
++	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
++	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++	    p--;
++	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++	    {
++	      /* no more DIR_SEPARATORS left */
++	      break;
++	    }
++	  *p = '\0';
++	}
+       else
+-	# We keep going just in case the user didn't refer to
+-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+-	# really was required.
++	{
++	  lt_fatal (__FILE__, __LINE__,
++		    "error accessing file \"%s\": %s",
++		    tmp_pathspec, nonnull (strerror (errno)));
++	}
++    }
++  XFREE (tmp_pathspec);
+ 
+-	# Nullify the symbol file.
+-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+-      fi
++  if (!has_symlinks)
++    {
++      return xstrdup (pathspec);
++    }
+ 
+-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+-	# Replace the output file specification.
+-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+-	link_command="$compile_command$compile_rpath"
++  tmp_pathspec = realpath (pathspec, buf);
++  if (tmp_pathspec == 0)
++    {
++      lt_fatal (__FILE__, __LINE__,
++		"could not follow symlinks for %s", pathspec);
++    }
++  return xstrdup (tmp_pathspec);
++#endif
++}
+ 
+-	# We have no uninstalled library dependencies, so finalize right now.
+-	$show "$link_command"
+-	$run eval "$link_command"
+-	exit_status=$?
++char *
++strendzap (char *str, const char *pat)
++{
++  size_t len, patlen;
+ 
+-	# Delete the generated files.
+-	if test -n "$dlsyms"; then
+-	  $show "$rm $output_objdir/${outputname}S.${objext}"
+-	  $run $rm "$output_objdir/${outputname}S.${objext}"
+-	fi
++  assert (str != NULL);
++  assert (pat != NULL);
+ 
+-	exit $exit_status
+-      fi
++  len = strlen (str);
++  patlen = strlen (pat);
+ 
+-      if test -n "$shlibpath_var"; then
+-	# We should set the shlibpath_var
+-	rpath=
+-	for dir in $temp_rpath; do
+-	  case $dir in
+-	  [\\/]* | [A-Za-z]:[\\/]*)
+-	    # Absolute path.
+-	    rpath="$rpath$dir:"
+-	    ;;
+-	  *)
+-	    # Relative path: add a thisdir entry.
+-	    rpath="$rpath\$thisdir/$dir:"
+-	    ;;
+-	  esac
+-	done
+-	temp_rpath="$rpath"
+-      fi
++  if (patlen <= len)
++    {
++      str += len - patlen;
++      if (strcmp (str, pat) == 0)
++	*str = '\0';
++    }
++  return str;
++}
+ 
+-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+-      fi
+-      if test -n "$finalize_shlibpath"; then
+-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+-      fi
++void
++lt_debugprintf (const char *file, int line, const char *fmt, ...)
++{
++  va_list args;
++  if (lt_debug)
++    {
++      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
++      va_start (args, fmt);
++      (void) vfprintf (stderr, fmt, args);
++      va_end (args);
++    }
++}
+ 
+-      compile_var=
+-      finalize_var=
+-      if test -n "$runpath_var"; then
+-	if test -n "$perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+-	fi
+-	if test -n "$finalize_perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $finalize_perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+-	fi
+-      fi
++static void
++lt_error_core (int exit_status, const char *file,
++	       int line, const char *mode,
++	       const char *message, va_list ap)
++{
++  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
++  vfprintf (stderr, message, ap);
++  fprintf (stderr, ".\n");
+ 
+-      if test "$no_install" = yes; then
+-	# We don't need to create a wrapper script.
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	# Replace the output file specification.
+-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+-	# Delete the old output file.
+-	$run $rm $output
+-	# Link the executable and exit
+-	$show "$link_command"
+-	$run eval "$link_command" || exit $?
+-	exit $EXIT_SUCCESS
+-      fi
++  if (exit_status >= 0)
++    exit (exit_status);
++}
+ 
+-      if test "$hardcode_action" = relink; then
+-	# Fast installation is not supported
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	relink_command="$finalize_var$finalize_command$finalize_rpath"
++void
++lt_fatal (const char *file, int line, const char *message, ...)
++{
++  va_list ap;
++  va_start (ap, message);
++  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
++  va_end (ap);
++}
+ 
+-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+-      else
+-	if test "$fast_install" != no; then
+-	  link_command="$finalize_var$compile_command$finalize_rpath"
+-	  if test "$fast_install" = yes; then
+-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+-	  else
+-	    # fast_install is set to needless
+-	    relink_command=
+-	  fi
+-	else
+-	  link_command="$compile_var$compile_command$compile_rpath"
+-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+-	fi
+-      fi
++static const char *
++nonnull (const char *s)
++{
++  return s ? s : "(null)";
++}
+ 
+-      # Replace the output file specification.
+-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++static const char *
++nonempty (const char *s)
++{
++  return (s && !*s) ? "(empty)" : nonnull (s);
++}
+ 
+-      # Delete the old output files.
+-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+-
+-      $show "$link_command"
+-      $run eval "$link_command" || exit $?
+-
+-      # Now create the wrapper script.
+-      $show "creating $output"
+-
+-      # Quote the relink command for shipping.
+-      if test -n "$relink_command"; then
+-	# Preserve any variables that may affect compiler behavior
+-	for var in $variables_saved_for_relink; do
+-	  if eval test -z \"\${$var+set}\"; then
+-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+-	  elif eval var_value=\$$var; test -z "$var_value"; then
+-	    relink_command="$var=; export $var; $relink_command"
+-	  else
+-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+-	  fi
+-	done
+-	relink_command="(cd `pwd`; $relink_command)"
+-	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+-      fi
+-
+-      # Quote $echo for shipping.
+-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+-	case $progpath in
+-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+-	esac
+-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+-      else
+-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+-      fi
+-
+-      # Only actually do things if our run command is non-null.
+-      if test -z "$run"; then
+-	# win32 will think the script is a binary if it has
+-	# a .exe suffix, so we strip it off here.
+-	case $output in
+-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+-	esac
+-	# test for cygwin because mv fails w/o .exe extensions
+-	case $host in
+-	  *cygwin*)
+-	    exeext=.exe
+-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+-	  *) exeext= ;;
+-	esac
+-	case $host in
+-	  *cygwin* | *mingw* )
+-            output_name=`basename $output`
+-            output_path=`dirname $output`
+-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+-            cwrapper="$output_path/$output_name.exe"
+-            $rm $cwrappersource $cwrapper
+-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+-
+-	    cat > $cwrappersource <<EOF
+-
+-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-
+-   The $output program cannot be directly executed until all the libtool
+-   libraries that it depends on are installed.
+-
+-   This wrapper executable should never be moved out of the build directory.
+-   If it is, it will not operate correctly.
+-
+-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+-   but could eventually absorb all of the scripts functionality and
+-   exec $objdir/$outputname directly.
+-*/
+-EOF
+-	    cat >> $cwrappersource<<"EOF"
+-#include <stdio.h>
+-#include <stdlib.h>
+-#include <unistd.h>
+-#include <malloc.h>
+-#include <stdarg.h>
+-#include <assert.h>
+-#include <string.h>
+-#include <ctype.h>
+-#include <sys/stat.h>
+-
+-#if defined(PATH_MAX)
+-# define LT_PATHMAX PATH_MAX
+-#elif defined(MAXPATHLEN)
+-# define LT_PATHMAX MAXPATHLEN
+-#else
+-# define LT_PATHMAX 1024
+-#endif
+-
+-#ifndef DIR_SEPARATOR
+-# define DIR_SEPARATOR '/'
+-# define PATH_SEPARATOR ':'
+-#endif
+-
+-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+-  defined (__OS2__)
+-# define HAVE_DOS_BASED_FILE_SYSTEM
+-# ifndef DIR_SEPARATOR_2
+-#  define DIR_SEPARATOR_2 '\\'
+-# endif
+-# ifndef PATH_SEPARATOR_2
+-#  define PATH_SEPARATOR_2 ';'
+-# endif
+-#endif
+-
+-#ifndef DIR_SEPARATOR_2
+-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+-#else /* DIR_SEPARATOR_2 */
+-# define IS_DIR_SEPARATOR(ch) \
+-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+-#endif /* DIR_SEPARATOR_2 */
+-
+-#ifndef PATH_SEPARATOR_2
+-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+-#else /* PATH_SEPARATOR_2 */
+-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+-#endif /* PATH_SEPARATOR_2 */
+-
+-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+-#define XFREE(stale) do { \
+-  if (stale) { free ((void *) stale); stale = 0; } \
+-} while (0)
+-
+-/* -DDEBUG is fairly common in CFLAGS.  */
+-#undef DEBUG
+-#if defined DEBUGWRAPPER
+-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+-#else
+-# define DEBUG(format, ...)
+-#endif
+-
+-const char *program_name = NULL;
+-
+-void * xmalloc (size_t num);
+-char * xstrdup (const char *string);
+-const char * base_name (const char *name);
+-char * find_executable(const char *wrapper);
+-int    check_executable(const char *path);
+-char * strendzap(char *str, const char *pat);
+-void lt_fatal (const char *message, ...);
+-
+-int
+-main (int argc, char *argv[])
+-{
+-  char **newargz;
+-  int i;
+-
+-  program_name = (char *) xstrdup (base_name (argv[0]));
+-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+-  DEBUG("(main) program_name : %s\n",program_name);
+-  newargz = XMALLOC(char *, argc+2);
+-EOF
+-
+-            cat >> $cwrappersource <<EOF
+-  newargz[0] = (char *) xstrdup("$SHELL");
+-EOF
+-
+-            cat >> $cwrappersource <<"EOF"
+-  newargz[1] = find_executable(argv[0]);
+-  if (newargz[1] == NULL)
+-    lt_fatal("Couldn't find %s", argv[0]);
+-  DEBUG("(main) found exe at : %s\n",newargz[1]);
+-  /* we know the script has the same name, without the .exe */
+-  /* so make sure newargz[1] doesn't end in .exe */
+-  strendzap(newargz[1],".exe");
+-  for (i = 1; i < argc; i++)
+-    newargz[i+1] = xstrdup(argv[i]);
+-  newargz[argc+1] = NULL;
+-
+-  for (i=0; i<argc+1; i++)
+-  {
+-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+-    ;
+-  }
+-
+-EOF
+-
+-            case $host_os in
+-              mingw*)
+-                cat >> $cwrappersource <<EOF
+-  execv("$SHELL",(char const **)newargz);
+-EOF
+-              ;;
+-              *)
+-                cat >> $cwrappersource <<EOF
+-  execv("$SHELL",newargz);
+-EOF
+-              ;;
+-            esac
+-
+-            cat >> $cwrappersource <<"EOF"
+-  return 127;
+-}
+-
+-void *
+-xmalloc (size_t num)
+-{
+-  void * p = (void *) malloc (num);
+-  if (!p)
+-    lt_fatal ("Memory exhausted");
+-
+-  return p;
+-}
++void
++lt_setenv (const char *name, const char *value)
++{
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_setenv) setting '%s' to '%s'\n",
++                  nonnull (name), nonnull (value));
++  {
++#ifdef HAVE_SETENV
++    /* always make a copy, for consistency with !HAVE_SETENV */
++    char *str = xstrdup (value);
++    setenv (name, str, 1);
++#else
++    int len = strlen (name) + 1 + strlen (value) + 1;
++    char *str = XMALLOC (char, len);
++    sprintf (str, "%s=%s", name, value);
++    if (putenv (str) != EXIT_SUCCESS)
++      {
++        XFREE (str);
++      }
++#endif
++  }
++}
+ 
+ char *
+-xstrdup (const char *string)
++lt_extend_str (const char *orig_value, const char *add, int to_end)
+ {
+-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+-;
++  char *new_value;
++  if (orig_value && *orig_value)
++    {
++      int orig_value_len = strlen (orig_value);
++      int add_len = strlen (add);
++      new_value = XMALLOC (char, add_len + orig_value_len + 1);
++      if (to_end)
++        {
++          strcpy (new_value, orig_value);
++          strcpy (new_value + orig_value_len, add);
++        }
++      else
++        {
++          strcpy (new_value, add);
++          strcpy (new_value + add_len, orig_value);
++        }
++    }
++  else
++    {
++      new_value = xstrdup (add);
++    }
++  return new_value;
+ }
+ 
+-const char *
+-base_name (const char *name)
++void
++lt_update_exe_path (const char *name, const char *value)
+ {
+-  const char *base;
+-
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  /* Skip over the disk name in MSDOS pathnames. */
+-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+-    name += 2;
+-#endif
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
+ 
+-  for (base = name; *name; name++)
+-    if (IS_DIR_SEPARATOR (*name))
+-      base = name + 1;
+-  return base;
++  if (name && *name && value && *value)
++    {
++      char *new_value = lt_extend_str (getenv (name), value, 0);
++      /* some systems can't cope with a ':'-terminated path #' */
++      int len = strlen (new_value);
++      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
++        {
++          new_value[len-1] = '\0';
++        }
++      lt_setenv (name, new_value);
++      XFREE (new_value);
++    }
+ }
+ 
+-int
+-check_executable(const char * path)
++void
++lt_update_lib_path (const char *name, const char *value)
+ {
+-  struct stat st;
+-
+-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+-  if ((!path) || (!*path))
+-    return 0;
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
+ 
+-  if ((stat (path, &st) >= 0) &&
+-      (
+-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+-#if defined (S_IXOTH)
+-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+-#endif
+-#if defined (S_IXGRP)
+-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+-#endif
+-       ((st.st_mode & S_IXUSR) == S_IXUSR))
+-      )
+-    return 1;
+-  else
+-    return 0;
++  if (name && *name && value && *value)
++    {
++      char *new_value = lt_extend_str (getenv (name), value, 0);
++      lt_setenv (name, new_value);
++      XFREE (new_value);
++    }
+ }
+ 
+-/* Searches for the full path of the wrapper.  Returns
+-   newly allocated full path name if found, NULL otherwise */
+-char *
+-find_executable (const char* wrapper)
++EOF
++	    case $host_os in
++	      mingw*)
++		cat <<"EOF"
++
++/* Prepares an argument vector before calling spawn().
++   Note that spawn() does not by itself call the command interpreter
++     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
++      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
++         GetVersionEx(&v);
++         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
++      }) ? "cmd.exe" : "command.com").
++   Instead it simply concatenates the arguments, separated by ' ', and calls
++   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
++   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
++   special way:
++   - Space and tab are interpreted as delimiters. They are not treated as
++     delimiters if they are surrounded by double quotes: "...".
++   - Unescaped double quotes are removed from the input. Their only effect is
++     that within double quotes, space and tab are treated like normal
++     characters.
++   - Backslashes not followed by double quotes are not special.
++   - But 2*n+1 backslashes followed by a double quote become
++     n backslashes followed by a double quote (n >= 0):
++       \" -> "
++       \\\" -> \"
++       \\\\\" -> \\"
++ */
++#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++char **
++prepare_spawn (char **argv)
+ {
+-  int has_slash = 0;
+-  const char* p;
+-  const char* p_next;
+-  /* static buffer for getcwd */
+-  char tmp[LT_PATHMAX + 1];
+-  int tmp_len;
+-  char* concat_name;
++  size_t argc;
++  char **new_argv;
++  size_t i;
+ 
+-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+-
+-  if ((wrapper == NULL) || (*wrapper == '\0'))
+-    return NULL;
++  /* Count number of arguments.  */
++  for (argc = 0; argv[argc] != NULL; argc++)
++    ;
+ 
+-  /* Absolute path? */
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+-  {
+-    concat_name = xstrdup (wrapper);
+-    if (check_executable(concat_name))
+-      return concat_name;
+-    XFREE(concat_name);
+-  }
+-  else
+-  {
+-#endif
+-    if (IS_DIR_SEPARATOR (wrapper[0]))
+-    {
+-      concat_name = xstrdup (wrapper);
+-      if (check_executable(concat_name))
+-        return concat_name;
+-      XFREE(concat_name);
+-    }
+-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+-  }
+-#endif
++  /* Allocate new argument vector.  */
++  new_argv = XMALLOC (char *, argc + 1);
+ 
+-  for (p = wrapper; *p; p++)
+-    if (*p == '/')
+-    {
+-      has_slash = 1;
+-      break;
+-    }
+-  if (!has_slash)
+-  {
+-    /* no slashes; search PATH */
+-    const char* path = getenv ("PATH");
+-    if (path != NULL)
++  /* Put quoted arguments into the new argument vector.  */
++  for (i = 0; i < argc; i++)
+     {
+-      for (p = path; *p; p = p_next)
+-      {
+-        const char* q;
+-        size_t p_len;
+-        for (q = p; *q; q++)
+-          if (IS_PATH_SEPARATOR(*q))
+-            break;
+-        p_len = q - p;
+-        p_next = (*q == '\0' ? q : q + 1);
+-        if (p_len == 0)
+-        {
+-          /* empty path: current directory */
+-          if (getcwd (tmp, LT_PATHMAX) == NULL)
+-            lt_fatal ("getcwd failed");
+-          tmp_len = strlen(tmp);
+-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+-          memcpy (concat_name, tmp, tmp_len);
+-          concat_name[tmp_len] = '/';
+-          strcpy (concat_name + tmp_len + 1, wrapper);
+-        }
+-        else
+-        {
+-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+-          memcpy (concat_name, p, p_len);
+-          concat_name[p_len] = '/';
+-          strcpy (concat_name + p_len + 1, wrapper);
+-        }
+-        if (check_executable(concat_name))
+-          return concat_name;
+-        XFREE(concat_name);
+-      }
+-    }
+-    /* not found in PATH; assume curdir */
+-  }
+-  /* Relative path | not found in path: prepend cwd */
+-  if (getcwd (tmp, LT_PATHMAX) == NULL)
+-    lt_fatal ("getcwd failed");
+-  tmp_len = strlen(tmp);
+-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+-  memcpy (concat_name, tmp, tmp_len);
+-  concat_name[tmp_len] = '/';
+-  strcpy (concat_name + tmp_len + 1, wrapper);
++      const char *string = argv[i];
+ 
+-  if (check_executable(concat_name))
+-    return concat_name;
+-  XFREE(concat_name);
+-  return NULL;
+-}
++      if (string[0] == '\0')
++	new_argv[i] = xstrdup ("\"\"");
++      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
++	{
++	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
++	  size_t length;
++	  unsigned int backslashes;
++	  const char *s;
++	  char *quoted_string;
++	  char *p;
++
++	  length = 0;
++	  backslashes = 0;
++	  if (quote_around)
++	    length++;
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		length += backslashes + 1;
++	      length++;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    length += backslashes + 1;
+ 
+-char *
+-strendzap(char *str, const char *pat)
+-{
+-  size_t len, patlen;
++	  quoted_string = XMALLOC (char, length + 1);
+ 
+-  assert(str != NULL);
+-  assert(pat != NULL);
++	  p = quoted_string;
++	  backslashes = 0;
++	  if (quote_around)
++	    *p++ = '"';
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		{
++		  unsigned int j;
++		  for (j = backslashes + 1; j > 0; j--)
++		    *p++ = '\\';
++		}
++	      *p++ = c;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    {
++	      unsigned int j;
++	      for (j = backslashes; j > 0; j--)
++		*p++ = '\\';
++	      *p++ = '"';
++	    }
++	  *p = '\0';
+ 
+-  len = strlen(str);
+-  patlen = strlen(pat);
++	  new_argv[i] = quoted_string;
++	}
++      else
++	new_argv[i] = (char *) string;
++    }
++  new_argv[argc] = NULL;
+ 
+-  if (patlen <= len)
+-  {
+-    str += len - patlen;
+-    if (strcmp(str, pat) == 0)
+-      *str = '\0';
+-  }
+-  return str;
++  return new_argv;
+ }
++EOF
++		;;
++	    esac
+ 
+-static void
+-lt_error_core (int exit_status, const char * mode,
+-          const char * message, va_list ap)
++            cat <<"EOF"
++void lt_dump_script (FILE* f)
+ {
+-  fprintf (stderr, "%s: %s: ", program_name, mode);
+-  vfprintf (stderr, message, ap);
+-  fprintf (stderr, ".\n");
+-
+-  if (exit_status >= 0)
+-    exit (exit_status);
++EOF
++	    func_emit_wrapper yes |
++	      $SED -n -e '
++s/^\(.\{79\}\)\(..*\)/\1\
++\2/
++h
++s/\([\\"]\)/\\\1/g
++s/$/\\n/
++s/\([^\n]*\).*/  fputs ("\1", f);/p
++g
++D'
++            cat <<"EOF"
+ }
++EOF
++}
++# end: func_emit_cwrapperexe_src
+ 
+-void
+-lt_fatal (const char *message, ...)
++# func_win32_import_lib_p ARG
++# True if ARG is an import lib, as indicated by $file_magic_cmd
++func_win32_import_lib_p ()
+ {
+-  va_list ap;
+-  va_start (ap, message);
+-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+-  va_end (ap);
++    $opt_debug
++    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
++    *import*) : ;;
++    *) false ;;
++    esac
+ }
+-EOF
+-          # we should really use a build-platform specific compiler
+-          # here, but OTOH, the wrappers (shell script and this C one)
+-          # are only useful if you want to execute the "real" binary.
+-          # Since the "real" binary is built for $host, then this
+-          # wrapper might as well be built for $host, too.
+-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+-          ;;
+-        esac
+-        $rm $output
+-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+-
+-	$echo > $output "\
+-#! $SHELL
+ 
+-# $output - temporary wrapper script for $objdir/$outputname
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# The $output program cannot be directly executed until all the libtool
+-# libraries that it depends on are installed.
+-#
+-# This wrapper script should never be moved out of the build directory.
+-# If it is, it will not operate correctly.
++# func_mode_link arg...
++func_mode_link ()
++{
++    $opt_debug
++    case $host in
++    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++      # It is impossible to link a dll without this setting, and
++      # we shouldn't force the makefile maintainer to figure out
++      # which system we are compiling for in order to pass an extra
++      # flag for every libtool invocation.
++      # allow_undefined=no
+ 
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='${SED} -e 1s/^X//'
+-sed_quote_subst='$sed_quote_subst'
++      # FIXME: Unfortunately, there are problems with the above when trying
++      # to make a dll which has undefined symbols, in which case not
++      # even a static library is built.  For now, we need to specify
++      # -no-undefined on the libtool link line when we can be certain
++      # that all symbols are satisfied, otherwise we get a static library.
++      allow_undefined=yes
++      ;;
++    *)
++      allow_undefined=yes
++      ;;
++    esac
++    libtool_args=$nonopt
++    base_compile="$nonopt $@"
++    compile_command=$nonopt
++    finalize_command=$nonopt
+ 
+-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+-  emulate sh
+-  NULLCMD=:
+-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+-  # is contrary to our usage.  Disable this feature.
+-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+-  setopt NO_GLOB_SUBST
+-else
+-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+-fi
++    compile_rpath=
++    finalize_rpath=
++    compile_shlibpath=
++    finalize_shlibpath=
++    convenience=
++    old_convenience=
++    deplibs=
++    old_deplibs=
++    compiler_flags=
++    linker_flags=
++    dllsearchpath=
++    lib_search_path=`pwd`
++    inst_prefix_dir=
++    new_inherited_linker_flags=
+ 
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++    avoid_version=no
++    bindir=
++    dlfiles=
++    dlprefiles=
++    dlself=no
++    export_dynamic=no
++    export_symbols=
++    export_symbols_regex=
++    generated=
++    libobjs=
++    ltlibs=
++    module=no
++    no_install=no
++    objs=
++    non_pic_objects=
++    precious_files_regex=
++    prefer_static_libs=no
++    preload=no
++    prev=
++    prevarg=
++    release=
++    rpath=
++    xrpath=
++    perm_rpath=
++    temp_rpath=
++    thread_safe=no
++    vinfo=
++    vinfo_number=no
++    weak_libs=
++    single_module="${wl}-single_module"
++    func_infer_tag $base_compile
+ 
+-relink_command=\"$relink_command\"
++    # We need to know -static, to get the right output filenames.
++    for arg
++    do
++      case $arg in
++      -shared)
++	test "$build_libtool_libs" != yes && \
++	  func_fatal_configuration "can not build a shared library"
++	build_old_libs=no
++	break
++	;;
++      -all-static | -static | -static-libtool-libs)
++	case $arg in
++	-all-static)
++	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++	    func_warning "complete static linking is impossible in this configuration"
++	  fi
++	  if test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=yes
++	  ;;
++	-static)
++	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=built
++	  ;;
++	-static-libtool-libs)
++	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=yes
++	  ;;
++	esac
++	build_libtool_libs=no
++	build_old_libs=yes
++	break
++	;;
++      esac
++    done
+ 
+-# This environment variable determines our operation mode.
+-if test \"\$libtool_install_magic\" = \"$magic\"; then
+-  # install mode needs the following variable:
+-  notinst_deplibs='$notinst_deplibs'
+-else
+-  # When we are sourced in execute mode, \$file and \$echo are already set.
+-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-    echo=\"$qecho\"
+-    file=\"\$0\"
+-    # Make sure echo works.
+-    if test \"X\$1\" = X--no-reexec; then
+-      # Discard the --no-reexec flag, and continue.
++    # See if our shared archives depend on static archives.
++    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++
++    # Go through the arguments, transforming them on the way.
++    while test "$#" -gt 0; do
++      arg="$1"
+       shift
+-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+-      # Yippee, \$echo works!
+-      :
+-    else
+-      # Restart under the correct shell, and then maybe \$echo will work.
+-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+-    fi
+-  fi\
+-"
+-	$echo >> $output "\
++      func_quote_for_eval "$arg"
++      qarg=$func_quote_for_eval_unquoted_result
++      func_append libtool_args " $func_quote_for_eval_result"
+ 
+-  # Find the directory that this script lives in.
+-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
++      # If the previous option needs an argument, assign it.
++      if test -n "$prev"; then
++	case $prev in
++	output)
++	  func_append compile_command " @OUTPUT@"
++	  func_append finalize_command " @OUTPUT@"
++	  ;;
++	esac
+ 
+-  # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+-  while test -n \"\$file\"; do
+-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++	case $prev in
++	bindir)
++	  bindir="$arg"
++	  prev=
++	  continue
++	  ;;
++	dlfiles|dlprefiles)
++	  if test "$preload" = no; then
++	    # Add the symbol object into the linking commands.
++	    func_append compile_command " @SYMFILE@"
++	    func_append finalize_command " @SYMFILE@"
++	    preload=yes
++	  fi
++	  case $arg in
++	  *.la | *.lo) ;;  # We handle these cases below.
++	  force)
++	    if test "$dlself" = no; then
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  self)
++	    if test "$prev" = dlprefiles; then
++	      dlself=yes
++	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++	      dlself=yes
++	    else
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  *)
++	    if test "$prev" = dlfiles; then
++	      func_append dlfiles " $arg"
++	    else
++	      func_append dlprefiles " $arg"
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  esac
++	  ;;
++	expsyms)
++	  export_symbols="$arg"
++	  test -f "$arg" \
++	    || func_fatal_error "symbol file \`$arg' does not exist"
++	  prev=
++	  continue
++	  ;;
++	expsyms_regex)
++	  export_symbols_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	framework)
++	  case $host in
++	    *-*-darwin*)
++	      case "$deplibs " in
++		*" $qarg.ltframework "*) ;;
++		*) func_append deplibs " $qarg.ltframework" # this is fixed later
++		   ;;
++	      esac
++	      ;;
++	  esac
++	  prev=
++	  continue
++	  ;;
++	inst_prefix)
++	  inst_prefix_dir="$arg"
++	  prev=
++	  continue
++	  ;;
++	objectlist)
++	  if test -f "$arg"; then
++	    save_arg=$arg
++	    moreargs=
++	    for fil in `cat "$save_arg"`
++	    do
++#	      func_append moreargs " $fil"
++	      arg=$fil
++	      # A libtool-controlled object.
+ 
+-    # If there was a directory component, then change thisdir.
+-    if test \"x\$destdir\" != \"x\$file\"; then
+-      case \"\$destdir\" in
+-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+-      *) thisdir=\"\$thisdir/\$destdir\" ;;
+-      esac
+-    fi
++	      # Check to see that this really is a libtool object.
++	      if func_lalib_unsafe_p "$arg"; then
++		pic_object=
++		non_pic_object=
+ 
+-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+-  done
++		# Read the .lo file
++		func_source "$arg"
+ 
+-  # Try to get the absolute directory name.
+-  absdir=\`cd \"\$thisdir\" && pwd\`
+-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+-"
++		if test -z "$pic_object" ||
++		   test -z "$non_pic_object" ||
++		   test "$pic_object" = none &&
++		   test "$non_pic_object" = none; then
++		  func_fatal_error "cannot find name of object for \`$arg'"
++		fi
+ 
+-	if test "$fast_install" = yes; then
+-	  $echo >> $output "\
+-  program=lt-'$outputname'$exeext
+-  progdir=\"\$thisdir/$objdir\"
++		# Extract subdirectory from the argument.
++		func_dirname "$arg" "/" ""
++		xdir="$func_dirname_result"
+ 
+-  if test ! -f \"\$progdir/\$program\" || \\
+-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++		if test "$pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  pic_object="$xdir$pic_object"
+ 
+-    file=\"\$\$-\$program\"
++		  if test "$prev" = dlfiles; then
++		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		      func_append dlfiles " $pic_object"
++		      prev=
++		      continue
++		    else
++		      # If libtool objects are unsupported, then we need to preload.
++		      prev=dlprefiles
++		    fi
++		  fi
++
++		  # CHECK ME:  I think I busted this.  -Ossama
++		  if test "$prev" = dlprefiles; then
++		    # Preload the old-style object.
++		    func_append dlprefiles " $pic_object"
++		    prev=
++		  fi
++
++		  # A PIC object.
++		  func_append libobjs " $pic_object"
++		  arg="$pic_object"
++		fi
++
++		# Non-PIC object.
++		if test "$non_pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  non_pic_object="$xdir$non_pic_object"
++
++		  # A standard non-PIC object
++		  func_append non_pic_objects " $non_pic_object"
++		  if test -z "$pic_object" || test "$pic_object" = none ; then
++		    arg="$non_pic_object"
++		  fi
++		else
++		  # If the PIC object exists, use it instead.
++		  # $xdir was prepended to $pic_object above.
++		  non_pic_object="$pic_object"
++		  func_append non_pic_objects " $non_pic_object"
++		fi
++	      else
++		# Only an error if not doing a dry-run.
++		if $opt_dry_run; then
++		  # Extract subdirectory from the argument.
++		  func_dirname "$arg" "/" ""
++		  xdir="$func_dirname_result"
++
++		  func_lo2o "$arg"
++		  pic_object=$xdir$objdir/$func_lo2o_result
++		  non_pic_object=$xdir$func_lo2o_result
++		  func_append libobjs " $pic_object"
++		  func_append non_pic_objects " $non_pic_object"
++	        else
++		  func_fatal_error "\`$arg' is not a valid libtool object"
++		fi
++	      fi
++	    done
++	  else
++	    func_fatal_error "link input file \`$arg' does not exist"
++	  fi
++	  arg=$save_arg
++	  prev=
++	  continue
++	  ;;
++	precious_regex)
++	  precious_files_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	release)
++	  release="-$arg"
++	  prev=
++	  continue
++	  ;;
++	rpath | xrpath)
++	  # We need an absolute path.
++	  case $arg in
++	  [\\/]* | [A-Za-z]:[\\/]*) ;;
++	  *)
++	    func_fatal_error "only absolute run-paths are allowed"
++	    ;;
++	  esac
++	  if test "$prev" = rpath; then
++	    case "$rpath " in
++	    *" $arg "*) ;;
++	    *) func_append rpath " $arg" ;;
++	    esac
++	  else
++	    case "$xrpath " in
++	    *" $arg "*) ;;
++	    *) func_append xrpath " $arg" ;;
++	    esac
++	  fi
++	  prev=
++	  continue
++	  ;;
++	shrext)
++	  shrext_cmds="$arg"
++	  prev=
++	  continue
++	  ;;
++	weak)
++	  func_append weak_libs " $arg"
++	  prev=
++	  continue
++	  ;;
++	xcclinker)
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $qarg"
++	  prev=
++	  func_append compile_command " $qarg"
++	  func_append finalize_command " $qarg"
++	  continue
++	  ;;
++	xcompiler)
++	  func_append compiler_flags " $qarg"
++	  prev=
++	  func_append compile_command " $qarg"
++	  func_append finalize_command " $qarg"
++	  continue
++	  ;;
++	xlinker)
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $wl$qarg"
++	  prev=
++	  func_append compile_command " $wl$qarg"
++	  func_append finalize_command " $wl$qarg"
++	  continue
++	  ;;
++	*)
++	  eval "$prev=\"\$arg\""
++	  prev=
++	  continue
++	  ;;
++	esac
++      fi # test -n "$prev"
++
++      prevarg="$arg"
++
++      case $arg in
++      -all-static)
++	if test -n "$link_static_flag"; then
++	  # See comment for -static flag below, for more details.
++	  func_append compile_command " $link_static_flag"
++	  func_append finalize_command " $link_static_flag"
++	fi
++	continue
++	;;
++
++      -allow-undefined)
++	# FIXME: remove this flag sometime in the future.
++	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
++	;;
++
++      -avoid-version)
++	avoid_version=yes
++	continue
++	;;
++
++      -bindir)
++	prev=bindir
++	continue
++	;;
++
++      -dlopen)
++	prev=dlfiles
++	continue
++	;;
++
++      -dlpreopen)
++	prev=dlprefiles
++	continue
++	;;
++
++      -export-dynamic)
++	export_dynamic=yes
++	continue
++	;;
++
++      -export-symbols | -export-symbols-regex)
++	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++	  func_fatal_error "more than one -exported-symbols argument is not allowed"
++	fi
++	if test "X$arg" = "X-export-symbols"; then
++	  prev=expsyms
++	else
++	  prev=expsyms_regex
++	fi
++	continue
++	;;
++
++      -framework)
++	prev=framework
++	continue
++	;;
++
++      -inst-prefix-dir)
++	prev=inst_prefix
++	continue
++	;;
++
++      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++      # so, if we see these flags be careful not to treat them like -L
++      -L[A-Z][A-Z]*:*)
++	case $with_gcc/$host in
++	no/*-*-irix* | /*-*-irix*)
++	  func_append compile_command " $arg"
++	  func_append finalize_command " $arg"
++	  ;;
++	esac
++	continue
++	;;
++
++      -L*)
++	func_stripname "-L" '' "$arg"
++	if test -z "$func_stripname_result"; then
++	  if test "$#" -gt 0; then
++	    func_fatal_error "require no space between \`-L' and \`$1'"
++	  else
++	    func_fatal_error "need path for \`-L' option"
++	  fi
++	fi
++	func_resolve_sysroot "$func_stripname_result"
++	dir=$func_resolve_sysroot_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	*)
++	  absdir=`cd "$dir" && pwd`
++	  test -z "$absdir" && \
++	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
++	  dir="$absdir"
++	  ;;
++	esac
++	case "$deplibs " in
++	*" -L$dir "* | *" $arg "*)
++	  # Will only happen for absolute or sysroot arguments
++	  ;;
++	*)
++	  # Preserve sysroot, but never include relative directories
++	  case $dir in
++	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
++	    *) func_append deplibs " -L$dir" ;;
++	  esac
++	  func_append lib_search_path " $dir"
++	  ;;
++	esac
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$dir:"*) ;;
++	  ::) dllsearchpath=$dir;;
++	  *) func_append dllsearchpath ":$dir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  ::) dllsearchpath=$testbindir;;
++	  *) func_append dllsearchpath ":$testbindir";;
++	  esac
++	  ;;
++	esac
++	continue
++	;;
++
++      -l*)
++	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
++	    # These systems don't actually have a C or math library (as such)
++	    continue
++	    ;;
++	  *-*-os2*)
++	    # These systems don't actually have a C library (as such)
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C and math libraries are in the System framework
++	    func_append deplibs " System.ltframework"
++	    continue
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  esac
++	elif test "X$arg" = "X-lc_r"; then
++	 case $host in
++	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	   # Do not include libc_r directly, use -pthread flag.
++	   continue
++	   ;;
++	 esac
++	fi
++	func_append deplibs " $arg"
++	continue
++	;;
++
++      -module)
++	module=yes
++	continue
++	;;
++
++      # Tru64 UNIX uses -model [arg] to determine the layout of C++
++      # classes, name mangling, and exception handling.
++      # Darwin uses the -arch flag to determine output architecture.
++      -model|-arch|-isysroot|--sysroot)
++	func_append compiler_flags " $arg"
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
++	prev=xcompiler
++	continue
++	;;
++
++      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
++      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
++	func_append compiler_flags " $arg"
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
++	case "$new_inherited_linker_flags " in
++	    *" $arg "*) ;;
++	    * ) func_append new_inherited_linker_flags " $arg" ;;
++	esac
++	continue
++	;;
++
++      -multi_module)
++	single_module="${wl}-multi_module"
++	continue
++	;;
++
++      -no-fast-install)
++	fast_install=no
++	continue
++	;;
++
++      -no-install)
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
++	  # The PATH hackery in wrapper scripts is required on Windows
++	  # and Darwin in order for the loader to find any dlls it needs.
++	  func_warning "\`-no-install' is ignored for $host"
++	  func_warning "assuming \`-no-fast-install' instead"
++	  fast_install=no
++	  ;;
++	*) no_install=yes ;;
++	esac
++	continue
++	;;
++
++      -no-undefined)
++	allow_undefined=no
++	continue
++	;;
++
++      -objectlist)
++	prev=objectlist
++	continue
++	;;
++
++      -o) prev=output ;;
++
++      -precious-files-regex)
++	prev=precious_regex
++	continue
++	;;
++
++      -release)
++	prev=release
++	continue
++	;;
++
++      -rpath)
++	prev=rpath
++	continue
++	;;
++
++      -R)
++	prev=xrpath
++	continue
++	;;
++
++      -R*)
++	func_stripname '-R' '' "$arg"
++	dir=$func_stripname_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	=*)
++	  func_stripname '=' '' "$dir"
++	  dir=$lt_sysroot$func_stripname_result
++	  ;;
++	*)
++	  func_fatal_error "only absolute run-paths are allowed"
++	  ;;
++	esac
++	case "$xrpath " in
++	*" $dir "*) ;;
++	*) func_append xrpath " $dir" ;;
++	esac
++	continue
++	;;
++
++      -shared)
++	# The effects of -shared are defined in a previous loop.
++	continue
++	;;
++
++      -shrext)
++	prev=shrext
++	continue
++	;;
++
++      -static | -static-libtool-libs)
++	# The effects of -static are defined in a previous loop.
++	# We used to do the same as -all-static on platforms that
++	# didn't have a PIC flag, but the assumption that the effects
++	# would be equivalent was wrong.  It would break on at least
++	# Digital Unix and AIX.
++	continue
++	;;
++
++      -thread-safe)
++	thread_safe=yes
++	continue
++	;;
++
++      -version-info)
++	prev=vinfo
++	continue
++	;;
++
++      -version-number)
++	prev=vinfo
++	vinfo_number=yes
++	continue
++	;;
++
++      -weak)
++        prev=weak
++	continue
++	;;
++
++      -Wc,*)
++	func_stripname '-Wc,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  func_append arg " $func_quote_for_eval_result"
++	  func_append compiler_flags " $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
++
++      -Wl,*)
++	func_stripname '-Wl,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  func_append arg " $wl$func_quote_for_eval_result"
++	  func_append compiler_flags " $wl$func_quote_for_eval_result"
++	  func_append linker_flags " $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
++
++      -Xcompiler)
++	prev=xcompiler
++	continue
++	;;
++
++      -Xlinker)
++	prev=xlinker
++	continue
++	;;
++
++      -XCClinker)
++	prev=xcclinker
++	continue
++	;;
++
++      # -msg_* for osf cc
++      -msg_*)
++	func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++
++      # Flags to be passed through unchanged, with rationale:
++      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
++      # -r[0-9][0-9]*        specify processor for the SGI compiler
++      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
++      # +DA*, +DD*           enable 64-bit mode for the HP compiler
++      # -q*                  compiler args for the IBM compiler
++      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
++      # -F/path              path to uninstalled frameworks, gcc on darwin
++      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
++      # @file                GCC response files
++      # -tp=*                Portland pgcc target processor selection
++      # --sysroot=*          for sysroot support
++      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
++      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
++      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
++      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++        func_append compile_command " $arg"
++        func_append finalize_command " $arg"
++        func_append compiler_flags " $arg"
++        continue
++        ;;
++
++      # Some other compiler flag.
++      -* | +*)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++
++      *.$objext)
++	# A standard object.
++	func_append objs " $arg"
++	;;
++
++      *.lo)
++	# A libtool-controlled object.
++
++	# Check to see that this really is a libtool object.
++	if func_lalib_unsafe_p "$arg"; then
++	  pic_object=
++	  non_pic_object=
++
++	  # Read the .lo file
++	  func_source "$arg"
++
++	  if test -z "$pic_object" ||
++	     test -z "$non_pic_object" ||
++	     test "$pic_object" = none &&
++	     test "$non_pic_object" = none; then
++	    func_fatal_error "cannot find name of object for \`$arg'"
++	  fi
++
++	  # Extract subdirectory from the argument.
++	  func_dirname "$arg" "/" ""
++	  xdir="$func_dirname_result"
++
++	  if test "$pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    pic_object="$xdir$pic_object"
++
++	    if test "$prev" = dlfiles; then
++	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		func_append dlfiles " $pic_object"
++		prev=
++		continue
++	      else
++		# If libtool objects are unsupported, then we need to preload.
++		prev=dlprefiles
++	      fi
++	    fi
++
++	    # CHECK ME:  I think I busted this.  -Ossama
++	    if test "$prev" = dlprefiles; then
++	      # Preload the old-style object.
++	      func_append dlprefiles " $pic_object"
++	      prev=
++	    fi
++
++	    # A PIC object.
++	    func_append libobjs " $pic_object"
++	    arg="$pic_object"
++	  fi
++
++	  # Non-PIC object.
++	  if test "$non_pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    non_pic_object="$xdir$non_pic_object"
++
++	    # A standard non-PIC object
++	    func_append non_pic_objects " $non_pic_object"
++	    if test -z "$pic_object" || test "$pic_object" = none ; then
++	      arg="$non_pic_object"
++	    fi
++	  else
++	    # If the PIC object exists, use it instead.
++	    # $xdir was prepended to $pic_object above.
++	    non_pic_object="$pic_object"
++	    func_append non_pic_objects " $non_pic_object"
++	  fi
++	else
++	  # Only an error if not doing a dry-run.
++	  if $opt_dry_run; then
++	    # Extract subdirectory from the argument.
++	    func_dirname "$arg" "/" ""
++	    xdir="$func_dirname_result"
++
++	    func_lo2o "$arg"
++	    pic_object=$xdir$objdir/$func_lo2o_result
++	    non_pic_object=$xdir$func_lo2o_result
++	    func_append libobjs " $pic_object"
++	    func_append non_pic_objects " $non_pic_object"
++	  else
++	    func_fatal_error "\`$arg' is not a valid libtool object"
++	  fi
++	fi
++	;;
++
++      *.$libext)
++	# An archive.
++	func_append deplibs " $arg"
++	func_append old_deplibs " $arg"
++	continue
++	;;
++
++      *.la)
++	# A libtool-controlled library.
++
++	func_resolve_sysroot "$arg"
++	if test "$prev" = dlfiles; then
++	  # This library was specified with -dlopen.
++	  func_append dlfiles " $func_resolve_sysroot_result"
++	  prev=
++	elif test "$prev" = dlprefiles; then
++	  # The library was specified with -dlpreopen.
++	  func_append dlprefiles " $func_resolve_sysroot_result"
++	  prev=
++	else
++	  func_append deplibs " $func_resolve_sysroot_result"
++	fi
++	continue
++	;;
++
++      # Some other compiler argument.
++      *)
++	# Unknown arguments in both finalize_command and compile_command need
++	# to be aesthetically quoted because they are evaled later.
++	func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++      esac # arg
++
++      # Now actually substitute the argument into the commands.
++      if test -n "$arg"; then
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
++      fi
++    done # argument parsing loop
++
++    test -n "$prev" && \
++      func_fatal_help "the \`$prevarg' option requires an argument"
++
++    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++      eval arg=\"$export_dynamic_flag_spec\"
++      func_append compile_command " $arg"
++      func_append finalize_command " $arg"
++    fi
++
++    oldlibs=
++    # calculate the name of the file, without its directory
++    func_basename "$output"
++    outputname="$func_basename_result"
++    libobjs_save="$libobjs"
++
++    if test -n "$shlibpath_var"; then
++      # get the directories listed in $shlibpath_var
++      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
++    else
++      shlib_search_path=
++    fi
++    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++
++    func_dirname "$output" "/" ""
++    output_objdir="$func_dirname_result$objdir"
++    func_to_tool_file "$output_objdir/"
++    tool_output_objdir=$func_to_tool_file_result
++    # Create the object directory.
++    func_mkdir_p "$output_objdir"
++
++    # Determine the type of output
++    case $output in
++    "")
++      func_fatal_help "you must specify an output file"
++      ;;
++    *.$libext) linkmode=oldlib ;;
++    *.lo | *.$objext) linkmode=obj ;;
++    *.la) linkmode=lib ;;
++    *) linkmode=prog ;; # Anything else should be a program.
++    esac
++
++    specialdeplibs=
++
++    libs=
++    # Find all interdependent deplibs by searching for libraries
++    # that are linked more than once (e.g. -la -lb -la)
++    for deplib in $deplibs; do
++      if $opt_preserve_dup_deps ; then
++	case "$libs " in
++	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
++	esac
++      fi
++      func_append libs " $deplib"
++    done
++
++    if test "$linkmode" = lib; then
++      libs="$predeps $libs $compiler_lib_search_path $postdeps"
++
++      # Compute libraries that are listed more than once in $predeps
++      # $postdeps and mark them as special (i.e., whose duplicates are
++      # not to be eliminated).
++      pre_post_deps=
++      if $opt_duplicate_compiler_generated_deps; then
++	for pre_post_dep in $predeps $postdeps; do
++	  case "$pre_post_deps " in
++	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
++	  esac
++	  func_append pre_post_deps " $pre_post_dep"
++	done
++      fi
++      pre_post_deps=
++    fi
++
++    deplibs=
++    newdependency_libs=
++    newlib_search_path=
++    need_relink=no # whether we're linking any uninstalled libtool libraries
++    notinst_deplibs= # not-installed libtool libraries
++    notinst_path= # paths that contain not-installed libtool libraries
++
++    case $linkmode in
++    lib)
++	passes="conv dlpreopen link"
++	for file in $dlfiles $dlprefiles; do
++	  case $file in
++	  *.la) ;;
++	  *)
++	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
++	    ;;
++	  esac
++	done
++	;;
++    prog)
++	compile_deplibs=
++	finalize_deplibs=
++	alldeplibs=no
++	newdlfiles=
++	newdlprefiles=
++	passes="conv scan dlopen dlpreopen link"
++	;;
++    *)  passes="conv"
++	;;
++    esac
++
++    for pass in $passes; do
++      # The preopen pass in lib mode reverses $deplibs; put it back here
++      # so that -L comes before libs that need it for instance...
++      if test "$linkmode,$pass" = "lib,link"; then
++	## FIXME: Find the place where the list is rebuilt in the wrong
++	##        order, and fix it there properly
++        tmp_deplibs=
++	for deplib in $deplibs; do
++	  tmp_deplibs="$deplib $tmp_deplibs"
++	done
++	deplibs="$tmp_deplibs"
++      fi
++
++      if test "$linkmode,$pass" = "lib,link" ||
++	 test "$linkmode,$pass" = "prog,scan"; then
++	libs="$deplibs"
++	deplibs=
++      fi
++      if test "$linkmode" = prog; then
++	case $pass in
++	dlopen) libs="$dlfiles" ;;
++	dlpreopen) libs="$dlprefiles" ;;
++	link)
++	  libs="$deplibs %DEPLIBS%"
++	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++	  ;;
++	esac
++      fi
++      if test "$linkmode,$pass" = "lib,dlpreopen"; then
++	# Collect and forward deplibs of preopened libtool libs
++	for lib in $dlprefiles; do
++	  # Ignore non-libtool-libs
++	  dependency_libs=
++	  func_resolve_sysroot "$lib"
++	  case $lib in
++	  *.la)	func_source "$func_resolve_sysroot_result" ;;
++	  esac
++
++	  # Collect preopened libtool deplibs, except any this library
++	  # has declared as weak libs
++	  for deplib in $dependency_libs; do
++	    func_basename "$deplib"
++            deplib_base=$func_basename_result
++	    case " $weak_libs " in
++	    *" $deplib_base "*) ;;
++	    *) func_append deplibs " $deplib" ;;
++	    esac
++	  done
++	done
++	libs="$dlprefiles"
++      fi
++      if test "$pass" = dlopen; then
++	# Collect dlpreopened libraries
++	save_deplibs="$deplibs"
++	deplibs=
++      fi
++
++      for deplib in $libs; do
++	lib=
++	found=no
++	case $deplib in
++	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
++        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    func_append compiler_flags " $deplib"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-l*)
++	  if test "$linkmode" != lib && test "$linkmode" != prog; then
++	    func_warning "\`-l' is ignored for archives/objects"
++	    continue
++	  fi
++	  func_stripname '-l' '' "$deplib"
++	  name=$func_stripname_result
++	  if test "$linkmode" = lib; then
++	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
++	  else
++	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
++	  fi
++	  for searchdir in $searchdirs; do
++	    for search_ext in .la $std_shrext .so .a; do
++	      # Search the libtool library
++	      lib="$searchdir/lib${name}${search_ext}"
++	      if test -f "$lib"; then
++		if test "$search_ext" = ".la"; then
++		  found=yes
++		else
++		  found=no
++		fi
++		break 2
++	      fi
++	    done
++	  done
++	  if test "$found" != yes; then
++	    # deplib doesn't seem to be a libtool library
++	    if test "$linkmode,$pass" = "prog,link"; then
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      deplibs="$deplib $deplibs"
++	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    continue
++	  else # deplib is a libtool library
++	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++	    # We need to do some special things here, and not later.
++	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	      case " $predeps $postdeps " in
++	      *" $deplib "*)
++		if func_lalib_p "$lib"; then
++		  library_names=
++		  old_library=
++		  func_source "$lib"
++		  for l in $old_library $library_names; do
++		    ll="$l"
++		  done
++		  if test "X$ll" = "X$old_library" ; then # only static version available
++		    found=no
++		    func_dirname "$lib" "" "."
++		    ladir="$func_dirname_result"
++		    lib=$ladir/$old_library
++		    if test "$linkmode,$pass" = "prog,link"; then
++		      compile_deplibs="$deplib $compile_deplibs"
++		      finalize_deplibs="$deplib $finalize_deplibs"
++		    else
++		      deplibs="$deplib $deplibs"
++		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++		    fi
++		    continue
++		  fi
++		fi
++		;;
++	      *) ;;
++	      esac
++	    fi
++	  fi
++	  ;; # -l
++	*.ltframework)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    deplibs="$deplib $deplibs"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-L*)
++	  case $linkmode in
++	  lib)
++	    deplibs="$deplib $deplibs"
++	    test "$pass" = conv && continue
++	    newdependency_libs="$deplib $newdependency_libs"
++	    func_stripname '-L' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
++	    ;;
++	  prog)
++	    if test "$pass" = conv; then
++	      deplibs="$deplib $deplibs"
++	      continue
++	    fi
++	    if test "$pass" = scan; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    func_stripname '-L' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
++	    ;;
++	  *)
++	    func_warning "\`-L' is ignored for archives/objects"
++	    ;;
++	  esac # linkmode
++	  continue
++	  ;; # -L
++	-R*)
++	  if test "$pass" = link; then
++	    func_stripname '-R' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    dir=$func_resolve_sysroot_result
++	    # Make sure the xrpath contains only unique directories.
++	    case "$xrpath " in
++	    *" $dir "*) ;;
++	    *) func_append xrpath " $dir" ;;
++	    esac
++	  fi
++	  deplibs="$deplib $deplibs"
++	  continue
++	  ;;
++	*.la)
++	  func_resolve_sysroot "$deplib"
++	  lib=$func_resolve_sysroot_result
++	  ;;
++	*.$libext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	    continue
++	  fi
++	  case $linkmode in
++	  lib)
++	    # Linking convenience modules into shared libraries is allowed,
++	    # but linking other static libraries is non-portable.
++	    case " $dlpreconveniencelibs " in
++	    *" $deplib "*) ;;
++	    *)
++	      valid_a_lib=no
++	      case $deplibs_check_method in
++		match_pattern*)
++		  set dummy $deplibs_check_method; shift
++		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
++		    | $EGREP "$match_pattern_regex" > /dev/null; then
++		    valid_a_lib=yes
++		  fi
++		;;
++		pass_all)
++		  valid_a_lib=yes
++		;;
++	      esac
++	      if test "$valid_a_lib" != yes; then
++		echo
++		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because the file extensions .$libext of this argument makes me believe"
++		echo "*** that it is just a static archive that I should not use here."
++	      else
++		echo
++		$ECHO "*** Warning: Linking the shared library $output against the"
++		$ECHO "*** static library $deplib is not portable!"
++		deplibs="$deplib $deplibs"
++	      fi
++	      ;;
++	    esac
++	    continue
++	    ;;
++	  prog)
++	    if test "$pass" != link; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    continue
++	    ;;
++	  esac # linkmode
++	  ;; # *.$libext
++	*.lo | *.$objext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	  elif test "$linkmode" = prog; then
++	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++	      # If there is no dlopen support or we're linking statically,
++	      # we need to preload.
++	      func_append newdlprefiles " $deplib"
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      func_append newdlfiles " $deplib"
++	    fi
++	  fi
++	  continue
++	  ;;
++	%DEPLIBS%)
++	  alldeplibs=yes
++	  continue
++	  ;;
++	esac # case $deplib
++
++	if test "$found" = yes || test -f "$lib"; then :
++	else
++	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
++	fi
++
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$lib" \
++	  || func_fatal_error "\`$lib' is not a valid libtool archive"
++
++	func_dirname "$lib" "" "."
++	ladir="$func_dirname_result"
++
++	dlname=
++	dlopen=
++	dlpreopen=
++	libdir=
++	library_names=
++	old_library=
++	inherited_linker_flags=
++	# If the library was installed with an old release of libtool,
++	# it will not redefine variables installed, or shouldnotlink
++	installed=yes
++	shouldnotlink=no
++	avoidtemprpath=
++
++
++	# Read the .la file
++	func_source "$lib"
++
++	# Convert "-framework foo" to "foo.ltframework"
++	if test -n "$inherited_linker_flags"; then
++	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
++	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
++	    case " $new_inherited_linker_flags " in
++	      *" $tmp_inherited_linker_flag "*) ;;
++	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
++	    esac
++	  done
++	fi
++	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	if test "$linkmode,$pass" = "lib,link" ||
++	   test "$linkmode,$pass" = "prog,scan" ||
++	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
++	  test -n "$dlopen" && func_append dlfiles " $dlopen"
++	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
++	fi
++
++	if test "$pass" = conv; then
++	  # Only check for convenience libraries
++	  deplibs="$lib $deplibs"
++	  if test -z "$libdir"; then
++	    if test -z "$old_library"; then
++	      func_fatal_error "cannot find name of link library for \`$lib'"
++	    fi
++	    # It is a libtool convenience library, so add in its objects.
++	    func_append convenience " $ladir/$objdir/$old_library"
++	    func_append old_convenience " $ladir/$objdir/$old_library"
++	    tmp_libs=
++	    for deplib in $dependency_libs; do
++	      deplibs="$deplib $deplibs"
++	      if $opt_preserve_dup_deps ; then
++		case "$tmp_libs " in
++		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
++		esac
++	      fi
++	      func_append tmp_libs " $deplib"
++	    done
++	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
++	    func_fatal_error "\`$lib' is not a convenience library"
++	  fi
++	  continue
++	fi # $pass = conv
++
++
++	# Get the name of the library we link against.
++	linklib=
++	if test -n "$old_library" &&
++	   { test "$prefer_static_libs" = yes ||
++	     test "$prefer_static_libs,$installed" = "built,no"; }; then
++	  linklib=$old_library
++	else
++	  for l in $old_library $library_names; do
++	    linklib="$l"
++	  done
++	fi
++	if test -z "$linklib"; then
++	  func_fatal_error "cannot find name of link library for \`$lib'"
++	fi
++
++	# This library was specified with -dlopen.
++	if test "$pass" = dlopen; then
++	  if test -z "$libdir"; then
++	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
++	  fi
++	  if test -z "$dlname" ||
++	     test "$dlopen_support" != yes ||
++	     test "$build_libtool_libs" = no; then
++	    # If there is no dlname, no dlopen support or we're linking
++	    # statically, we need to preload.  We also need to preload any
++	    # dependent libraries so libltdl's deplib preloader doesn't
++	    # bomb out in the load deplibs phase.
++	    func_append dlprefiles " $lib $dependency_libs"
++	  else
++	    func_append newdlfiles " $lib"
++	  fi
++	  continue
++	fi # $pass = dlopen
++
++	# We need an absolute path.
++	case $ladir in
++	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++	*)
++	  abs_ladir=`cd "$ladir" && pwd`
++	  if test -z "$abs_ladir"; then
++	    func_warning "cannot determine absolute directory name of \`$ladir'"
++	    func_warning "passing it literally to the linker, although it might fail"
++	    abs_ladir="$ladir"
++	  fi
++	  ;;
++	esac
++	func_basename "$lib"
++	laname="$func_basename_result"
++
++	# Find the relevant object directory and library name.
++	if test "X$installed" = Xyes; then
++	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    func_warning "library \`$lib' was moved."
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    libdir="$abs_ladir"
++	  else
++	    dir="$lt_sysroot$libdir"
++	    absdir="$lt_sysroot$libdir"
++	  fi
++	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
++	else
++	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    # Remove this search path later
++	    func_append notinst_path " $abs_ladir"
++	  else
++	    dir="$ladir/$objdir"
++	    absdir="$abs_ladir/$objdir"
++	    # Remove this search path later
++	    func_append notinst_path " $abs_ladir"
++	  fi
++	fi # $installed = yes
++	func_stripname 'lib' '.la' "$laname"
++	name=$func_stripname_result
++
++	# This library was specified with -dlpreopen.
++	if test "$pass" = dlpreopen; then
++	  if test -z "$libdir" && test "$linkmode" = prog; then
++	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
++	  fi
++	  case "$host" in
++	    # special handling for platforms with PE-DLLs.
++	    *cygwin* | *mingw* | *cegcc* )
++	      # Linker will automatically link against shared library if both
++	      # static and shared are present.  Therefore, ensure we extract
++	      # symbols from the import library if a shared library is present
++	      # (otherwise, the dlopen module name will be incorrect).  We do
++	      # this by putting the import library name into $newdlprefiles.
++	      # We recover the dlopen module name by 'saving' the la file
++	      # name in a special purpose variable, and (later) extracting the
++	      # dlname from the la file.
++	      if test -n "$dlname"; then
++	        func_tr_sh "$dir/$linklib"
++	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
++	        func_append newdlprefiles " $dir/$linklib"
++	      else
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      fi
++	    ;;
++	    * )
++	      # Prefer using a static library (so that no silly _DYNAMIC symbols
++	      # are required to link).
++	      if test -n "$old_library"; then
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      # Otherwise, use the dlname, so that lt_dlopen finds it.
++	      elif test -n "$dlname"; then
++	        func_append newdlprefiles " $dir/$dlname"
++	      else
++	        func_append newdlprefiles " $dir/$linklib"
++	      fi
++	    ;;
++	  esac
++	fi # $pass = dlpreopen
++
++	if test -z "$libdir"; then
++	  # Link the convenience library
++	  if test "$linkmode" = lib; then
++	    deplibs="$dir/$old_library $deplibs"
++	  elif test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$dir/$old_library $compile_deplibs"
++	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
++	  else
++	    deplibs="$lib $deplibs" # used for prog,scan pass
++	  fi
++	  continue
++	fi
++
++
++	if test "$linkmode" = prog && test "$pass" != link; then
++	  func_append newlib_search_path " $ladir"
++	  deplibs="$lib $deplibs"
++
++	  linkalldeplibs=no
++	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
++	     test "$build_libtool_libs" = no; then
++	    linkalldeplibs=yes
++	  fi
++
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    case $deplib in
++	    -L*) func_stripname '-L' '' "$deplib"
++	         func_resolve_sysroot "$func_stripname_result"
++	         func_append newlib_search_path " $func_resolve_sysroot_result"
++		 ;;
++	    esac
++	    # Need to link against all dependency_libs?
++	    if test "$linkalldeplibs" = yes; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      # Need to hardcode shared library paths
++	      # or/and link against static libraries
++	      newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    if $opt_preserve_dup_deps ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
++	      esac
++	    fi
++	    func_append tmp_libs " $deplib"
++	  done # for deplib
++	  continue
++	fi # $linkmode = prog...
++
++	if test "$linkmode,$pass" = "prog,link"; then
++	  if test -n "$library_names" &&
++	     { { test "$prefer_static_libs" = no ||
++	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
++	       test -z "$old_library"; }; then
++	    # We need to hardcode the library path
++	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++	      # Make sure the rpath contains only unique directories.
++	      case "$temp_rpath:" in
++	      *"$absdir:"*) ;;
++	      *) func_append temp_rpath "$absdir:" ;;
++	      esac
++	    fi
++
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) func_append compile_rpath " $absdir" ;;
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_append finalize_rpath " $libdir" ;;
++	      esac
++	      ;;
++	    esac
++	  fi # $linkmode,$pass = prog,link...
++
++	  if test "$alldeplibs" = yes &&
++	     { test "$deplibs_check_method" = pass_all ||
++	       { test "$build_libtool_libs" = yes &&
++		 test -n "$library_names"; }; }; then
++	    # We only need to search for static libraries
++	    continue
++	  fi
++	fi
++
++	link_static=no # Whether the deplib will be linked statically
++	use_static_libs=$prefer_static_libs
++	if test "$use_static_libs" = built && test "$installed" = yes; then
++	  use_static_libs=no
++	fi
++	if test -n "$library_names" &&
++	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
++	  case $host in
++	  *cygwin* | *mingw* | *cegcc*)
++	      # No point in relinking DLLs because paths are not encoded
++	      func_append notinst_deplibs " $lib"
++	      need_relink=no
++	    ;;
++	  *)
++	    if test "$installed" = no; then
++	      func_append notinst_deplibs " $lib"
++	      need_relink=yes
++	    fi
++	    ;;
++	  esac
++	  # This is a shared library
++
++	  # Warn about portability, can't link against -module's on some
++	  # systems (darwin).  Don't bleat about dlopened modules though!
++	  dlopenmodule=""
++	  for dlpremoduletest in $dlprefiles; do
++	    if test "X$dlpremoduletest" = "X$lib"; then
++	      dlopenmodule="$dlpremoduletest"
++	      break
++	    fi
++	  done
++	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
++	    echo
++	    if test "$linkmode" = prog; then
++	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
++	    else
++	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
++	    fi
++	    $ECHO "*** $linklib is not portable!"
++	  fi
++	  if test "$linkmode" = lib &&
++	     test "$hardcode_into_libs" = yes; then
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) func_append compile_rpath " $absdir" ;;
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_append finalize_rpath " $libdir" ;;
++	      esac
++	      ;;
++	    esac
++	  fi
++
++	  if test -n "$old_archive_from_expsyms_cmds"; then
++	    # figure out the soname
++	    set dummy $library_names
++	    shift
++	    realname="$1"
++	    shift
++	    libname=`eval "\\$ECHO \"$libname_spec\""`
++	    # use dlname if we got it. it's perfectly good, no?
++	    if test -n "$dlname"; then
++	      soname="$dlname"
++	    elif test -n "$soname_spec"; then
++	      # bleh windows
++	      case $host in
++	      *cygwin* | mingw* | *cegcc*)
++	        func_arith $current - $age
++		major=$func_arith_result
++		versuffix="-$major"
++		;;
++	      esac
++	      eval soname=\"$soname_spec\"
++	    else
++	      soname="$realname"
++	    fi
++
++	    # Make a new name for the extract_expsyms_cmds to use
++	    soroot="$soname"
++	    func_basename "$soroot"
++	    soname="$func_basename_result"
++	    func_stripname 'lib' '.dll' "$soname"
++	    newlib=libimp-$func_stripname_result.a
++
++	    # If the library has no export list, then create one now
++	    if test -f "$output_objdir/$soname-def"; then :
++	    else
++	      func_verbose "extracting exported symbol list from \`$soname'"
++	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
++	    fi
++
++	    # Create $newlib
++	    if test -f "$output_objdir/$newlib"; then :; else
++	      func_verbose "generating import library for \`$soname'"
++	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
++	    fi
++	    # make sure the library variables are pointing to the new library
++	    dir=$output_objdir
++	    linklib=$newlib
++	  fi # test -n "$old_archive_from_expsyms_cmds"
++
++	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    lib_linked=yes
++	    case $hardcode_action in
++	    immediate | unsupported)
++	      if test "$hardcode_direct" = no; then
++		add="$dir/$linklib"
++		case $host in
++		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++		    *-*-unixware7*) add_dir="-L$dir" ;;
++		  *-*-darwin* )
++		    # if the lib is a (non-dlopened) module then we can not
++		    # link against it, someone is ignoring the earlier warnings
++		    if /usr/bin/file -L $add 2> /dev/null |
++			 $GREP ": [^:]* bundle" >/dev/null ; then
++		      if test "X$dlopenmodule" != "X$lib"; then
++			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
++			if test -z "$old_library" ; then
++			  echo
++			  echo "*** And there doesn't seem to be a static archive available"
++			  echo "*** The link will probably fail, sorry"
++			else
++			  add="$dir/$old_library"
++			fi
++		      elif test -n "$old_library"; then
++			add="$dir/$old_library"
++		      fi
++		    fi
++		esac
++	      elif test "$hardcode_minus_L" = no; then
++		case $host in
++		*-*-sunos*) add_shlibpath="$dir" ;;
++		esac
++		add_dir="-L$dir"
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = no; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    relink)
++	      if test "$hardcode_direct" = yes &&
++	         test "$hardcode_direct_absolute" = no; then
++		add="$dir/$linklib"
++	      elif test "$hardcode_minus_L" = yes; then
++		add_dir="-L$absdir"
++		# Try looking first in the location we're being installed to.
++		if test -n "$inst_prefix_dir"; then
++		  case $libdir in
++		    [\\/]*)
++		      func_append add_dir " -L$inst_prefix_dir$libdir"
++		      ;;
++		  esac
++		fi
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = yes; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    *) lib_linked=no ;;
++	    esac
++
++	    if test "$lib_linked" != yes; then
++	      func_fatal_configuration "unsupported hardcode properties"
++	    fi
++
++	    if test -n "$add_shlibpath"; then
++	      case :$compile_shlibpath: in
++	      *":$add_shlibpath:"*) ;;
++	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
++	      esac
++	    fi
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
++	    else
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	      if test "$hardcode_direct" != yes &&
++		 test "$hardcode_minus_L" != yes &&
++		 test "$hardcode_shlibpath_var" = yes; then
++		case :$finalize_shlibpath: in
++		*":$libdir:"*) ;;
++		*) func_append finalize_shlibpath "$libdir:" ;;
++		esac
++	      fi
++	    fi
++	  fi
++
++	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    # Finalize command for both is simple: just hardcode it.
++	    if test "$hardcode_direct" = yes &&
++	       test "$hardcode_direct_absolute" = no; then
++	      add="$libdir/$linklib"
++	    elif test "$hardcode_minus_L" = yes; then
++	      add_dir="-L$libdir"
++	      add="-l$name"
++	    elif test "$hardcode_shlibpath_var" = yes; then
++	      case :$finalize_shlibpath: in
++	      *":$libdir:"*) ;;
++	      *) func_append finalize_shlibpath "$libdir:" ;;
++	      esac
++	      add="-l$name"
++	    elif test "$hardcode_automatic" = yes; then
++	      if test -n "$inst_prefix_dir" &&
++		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
++		add="$inst_prefix_dir$libdir/$linklib"
++	      else
++		add="$libdir/$linklib"
++	      fi
++	    else
++	      # We cannot seem to hardcode it, guess we'll fake it.
++	      add_dir="-L$libdir"
++	      # Try looking first in the location we're being installed to.
++	      if test -n "$inst_prefix_dir"; then
++		case $libdir in
++		  [\\/]*)
++		    func_append add_dir " -L$inst_prefix_dir$libdir"
++		    ;;
++		esac
++	      fi
++	      add="-l$name"
++	    fi
++
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++	    else
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	    fi
++	  fi
++	elif test "$linkmode" = prog; then
++	  # Here we assume that one of hardcode_direct or hardcode_minus_L
++	  # is not unsupported.  This is valid on all known static and
++	  # shared platforms.
++	  if test "$hardcode_direct" != unsupported; then
++	    test -n "$old_library" && linklib="$old_library"
++	    compile_deplibs="$dir/$linklib $compile_deplibs"
++	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
++	  else
++	    compile_deplibs="-l$name -L$dir $compile_deplibs"
++	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++	  fi
++	elif test "$build_libtool_libs" = yes; then
++	  # Not a shared library
++	  if test "$deplibs_check_method" != pass_all; then
++	    # We're trying link a shared library against a static one
++	    # but the system doesn't support it.
++
++	    # Just print a warning and add the library to dependency_libs so
++	    # that the program can be linked against the static library.
++	    echo
++	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
++	    echo "*** I have the capability to make that library automatically link in when"
++	    echo "*** you link to this library.  But I can only do this if you have a"
++	    echo "*** shared version of the library, which you do not appear to have."
++	    if test "$module" = yes; then
++	      echo "*** But as you try to build a module library, libtool will still create "
++	      echo "*** a static module, that should work as long as the dlopening application"
++	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
++	      if test -z "$global_symbol_pipe"; then
++		echo
++		echo "*** However, this would only work if libtool was able to extract symbol"
++		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++		echo "*** not find such a program.  So, this module is probably useless."
++		echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	      fi
++	      if test "$build_old_libs" = no; then
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  else
++	    deplibs="$dir/$old_library $deplibs"
++	    link_static=yes
++	  fi
++	fi # link shared/static library?
++
++	if test "$linkmode" = lib; then
++	  if test -n "$dependency_libs" &&
++	     { test "$hardcode_into_libs" != yes ||
++	       test "$build_old_libs" = yes ||
++	       test "$link_static" = yes; }; then
++	    # Extract -R from dependency_libs
++	    temp_deplibs=
++	    for libdir in $dependency_libs; do
++	      case $libdir in
++	      -R*) func_stripname '-R' '' "$libdir"
++	           temp_xrpath=$func_stripname_result
++		   case " $xrpath " in
++		   *" $temp_xrpath "*) ;;
++		   *) func_append xrpath " $temp_xrpath";;
++		   esac;;
++	      *) func_append temp_deplibs " $libdir";;
++	      esac
++	    done
++	    dependency_libs="$temp_deplibs"
++	  fi
++
++	  func_append newlib_search_path " $absdir"
++	  # Link against this library
++	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++	  # ... and its dependency_libs
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    newdependency_libs="$deplib $newdependency_libs"
++	    case $deplib in
++              -L*) func_stripname '-L' '' "$deplib"
++                   func_resolve_sysroot "$func_stripname_result";;
++              *) func_resolve_sysroot "$deplib" ;;
++            esac
++	    if $opt_preserve_dup_deps ; then
++	      case "$tmp_libs " in
++	      *" $func_resolve_sysroot_result "*)
++                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
++	      esac
++	    fi
++	    func_append tmp_libs " $func_resolve_sysroot_result"
++	  done
++
++	  if test "$link_all_deplibs" != no; then
++	    # Add the search paths of all dependency libraries
++	    for deplib in $dependency_libs; do
++	      path=
++	      case $deplib in
++	      -L*) path="$deplib" ;;
++	      *.la)
++	        func_resolve_sysroot "$deplib"
++	        deplib=$func_resolve_sysroot_result
++	        func_dirname "$deplib" "" "."
++		dir=$func_dirname_result
++		# We need an absolute path.
++		case $dir in
++		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++		*)
++		  absdir=`cd "$dir" && pwd`
++		  if test -z "$absdir"; then
++		    func_warning "cannot determine absolute directory name of \`$dir'"
++		    absdir="$dir"
++		  fi
++		  ;;
++		esac
++		if $GREP "^installed=no" $deplib > /dev/null; then
++		case $host in
++		*-*-darwin*)
++		  depdepl=
++		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++		  if test -n "$deplibrary_names" ; then
++		    for tmp in $deplibrary_names ; do
++		      depdepl=$tmp
++		    done
++		    if test -f "$absdir/$objdir/$depdepl" ; then
++		      depdepl="$absdir/$objdir/$depdepl"
++		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
++                      if test -z "$darwin_install_name"; then
++                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
++                      fi
++		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
++		      path=
++		    fi
++		  fi
++		  ;;
++		*)
++		  path="-L$absdir/$objdir"
++		  ;;
++		esac
++		else
++		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		  test -z "$libdir" && \
++		    func_fatal_error "\`$deplib' is not a valid libtool archive"
++		  test "$absdir" != "$libdir" && \
++		    func_warning "\`$deplib' seems to be moved"
++
++		  path="-L$absdir"
++		fi
++		;;
++	      esac
++	      case " $deplibs " in
++	      *" $path "*) ;;
++	      *) deplibs="$path $deplibs" ;;
++	      esac
++	    done
++	  fi # link_all_deplibs != no
++	fi # linkmode = lib
++      done # for deplib in $libs
++      if test "$pass" = link; then
++	if test "$linkmode" = "prog"; then
++	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
++	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
++	else
++	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	fi
++      fi
++      dependency_libs="$newdependency_libs"
++      if test "$pass" = dlpreopen; then
++	# Link the dlpreopened libraries before other libraries
++	for deplib in $save_deplibs; do
++	  deplibs="$deplib $deplibs"
++	done
++      fi
++      if test "$pass" != dlopen; then
++	if test "$pass" != conv; then
++	  # Make sure lib_search_path contains only unique directories.
++	  lib_search_path=
++	  for dir in $newlib_search_path; do
++	    case "$lib_search_path " in
++	    *" $dir "*) ;;
++	    *) func_append lib_search_path " $dir" ;;
++	    esac
++	  done
++	  newlib_search_path=
++	fi
++
++	if test "$linkmode,$pass" != "prog,link"; then
++	  vars="deplibs"
++	else
++	  vars="compile_deplibs finalize_deplibs"
++	fi
++	for var in $vars dependency_libs; do
++	  # Add libraries to $var in reverse order
++	  eval tmp_libs=\"\$$var\"
++	  new_libs=
++	  for deplib in $tmp_libs; do
++	    # FIXME: Pedantically, this is the right thing to do, so
++	    #        that some nasty dependency loop isn't accidentally
++	    #        broken:
++	    #new_libs="$deplib $new_libs"
++	    # Pragmatically, this seems to cause very few problems in
++	    # practice:
++	    case $deplib in
++	    -L*) new_libs="$deplib $new_libs" ;;
++	    -R*) ;;
++	    *)
++	      # And here is the reason: when a library appears more
++	      # than once as an explicit dependence of a library, or
++	      # is implicitly linked in more than once by the
++	      # compiler, it is considered special, and multiple
++	      # occurrences thereof are not removed.  Compare this
++	      # with having the same library being listed as a
++	      # dependency of multiple other libraries: in this case,
++	      # we know (pedantically, we assume) the library does not
++	      # need to be listed more than once, so we keep only the
++	      # last copy.  This is not always right, but it is rare
++	      # enough that we require users that really mean to play
++	      # such unportable linking tricks to link the library
++	      # using -Wl,-lname, so that libtool does not consider it
++	      # for duplicate removal.
++	      case " $specialdeplibs " in
++	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
++	      *)
++		case " $new_libs " in
++		*" $deplib "*) ;;
++		*) new_libs="$deplib $new_libs" ;;
++		esac
++		;;
++	      esac
++	      ;;
++	    esac
++	  done
++	  tmp_libs=
++	  for deplib in $new_libs; do
++	    case $deplib in
++	    -L*)
++	      case " $tmp_libs " in
++	      *" $deplib "*) ;;
++	      *) func_append tmp_libs " $deplib" ;;
++	      esac
++	      ;;
++	    *) func_append tmp_libs " $deplib" ;;
++	    esac
++	  done
++	  eval $var=\"$tmp_libs\"
++	done # for var
++      fi
++      # Last step: remove runtime libs from dependency_libs
++      # (they stay in deplibs)
++      tmp_libs=
++      for i in $dependency_libs ; do
++	case " $predeps $postdeps $compiler_lib_search_path " in
++	*" $i "*)
++	  i=""
++	  ;;
++	esac
++	if test -n "$i" ; then
++	  func_append tmp_libs " $i"
++	fi
++      done
++      dependency_libs=$tmp_libs
++    done # for pass
++    if test "$linkmode" = prog; then
++      dlfiles="$newdlfiles"
++    fi
++    if test "$linkmode" = prog || test "$linkmode" = lib; then
++      dlprefiles="$newdlprefiles"
++    fi
++
++    case $linkmode in
++    oldlib)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for archives"
++      fi
++
++      case " $deplibs" in
++      *\ -l* | *\ -L*)
++	func_warning "\`-l' and \`-L' are ignored for archives" ;;
++      esac
++
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for archives"
++
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for archives"
++
++      test -n "$vinfo" && \
++	func_warning "\`-version-info/-version-number' is ignored for archives"
++
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for archives"
++
++      test -n "$export_symbols$export_symbols_regex" && \
++	func_warning "\`-export-symbols' is ignored for archives"
++
++      # Now set the variables for building old libraries.
++      build_libtool_libs=no
++      oldlibs="$output"
++      func_append objs "$old_deplibs"
++      ;;
++
++    lib)
++      # Make sure we only generate libraries of the form `libNAME.la'.
++      case $outputname in
++      lib*)
++	func_stripname 'lib' '.la' "$outputname"
++	name=$func_stripname_result
++	eval shared_ext=\"$shrext_cmds\"
++	eval libname=\"$libname_spec\"
++	;;
++      *)
++	test "$module" = no && \
++	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
++
++	if test "$need_lib_prefix" != no; then
++	  # Add the "lib" prefix for modules if required
++	  func_stripname '' '.la' "$outputname"
++	  name=$func_stripname_result
++	  eval shared_ext=\"$shrext_cmds\"
++	  eval libname=\"$libname_spec\"
++	else
++	  func_stripname '' '.la' "$outputname"
++	  libname=$func_stripname_result
++	fi
++	;;
++      esac
++
++      if test -n "$objs"; then
++	if test "$deplibs_check_method" != pass_all; then
++	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
++	else
++	  echo
++	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
++	  $ECHO "*** objects $objs is not portable!"
++	  func_append libobjs " $objs"
++	fi
++      fi
++
++      test "$dlself" != no && \
++	func_warning "\`-dlopen self' is ignored for libtool libraries"
++
++      set dummy $rpath
++      shift
++      test "$#" -gt 1 && \
++	func_warning "ignoring multiple \`-rpath's for a libtool library"
++
++      install_libdir="$1"
++
++      oldlibs=
++      if test -z "$rpath"; then
++	if test "$build_libtool_libs" = yes; then
++	  # Building a libtool convenience library.
++	  # Some compilers have problems with a `.al' extension so
++	  # convenience libraries should have the same extension an
++	  # archive normally would.
++	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
++	  build_libtool_libs=convenience
++	  build_old_libs=yes
++	fi
++
++	test -n "$vinfo" && \
++	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
++
++	test -n "$release" && \
++	  func_warning "\`-release' is ignored for convenience libraries"
++      else
++
++	# Parse the version information argument.
++	save_ifs="$IFS"; IFS=':'
++	set dummy $vinfo 0 0 0
++	shift
++	IFS="$save_ifs"
++
++	test -n "$7" && \
++	  func_fatal_help "too many parameters to \`-version-info'"
++
++	# convert absolute version numbers to libtool ages
++	# this retains compatibility with .la files and attempts
++	# to make the code below a bit more comprehensible
++
++	case $vinfo_number in
++	yes)
++	  number_major="$1"
++	  number_minor="$2"
++	  number_revision="$3"
++	  #
++	  # There are really only two kinds -- those that
++	  # use the current revision as the major version
++	  # and those that subtract age and use age as
++	  # a minor version.  But, then there is irix
++	  # which has an extra 1 added just for fun
++	  #
++	  case $version_type in
++	  # correct linux to gnu/linux during the next big refactor
++	  darwin|linux|osf|windows|none)
++	    func_arith $number_major + $number_minor
++	    current=$func_arith_result
++	    age="$number_minor"
++	    revision="$number_revision"
++	    ;;
++	  freebsd-aout|freebsd-elf|qnx|sunos)
++	    current="$number_major"
++	    revision="$number_minor"
++	    age="0"
++	    ;;
++	  irix|nonstopux)
++	    func_arith $number_major + $number_minor
++	    current=$func_arith_result
++	    age="$number_minor"
++	    revision="$number_minor"
++	    lt_irix_increment=no
++	    ;;
++	  *)
++	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
++	    ;;
++	  esac
++	  ;;
++	no)
++	  current="$1"
++	  revision="$2"
++	  age="$3"
++	  ;;
++	esac
++
++	# Check that each of the things are valid numbers.
++	case $current in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "CURRENT \`$current' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
++
++	case $revision in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "REVISION \`$revision' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
++
++	case $age in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "AGE \`$age' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
++
++	if test "$age" -gt "$current"; then
++	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	fi
++
++	# Calculate the version variables.
++	major=
++	versuffix=
++	verstring=
++	case $version_type in
++	none) ;;
++
++	darwin)
++	  # Like Linux, but with the current version available in
++	  # verstring for coding it into the library header
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix="$major.$age.$revision"
++	  # Darwin ld doesn't like 0 for these options...
++	  func_arith $current + 1
++	  minor_current=$func_arith_result
++	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++	  ;;
++
++	freebsd-aout)
++	  major=".$current"
++	  versuffix=".$current.$revision";
++	  ;;
++
++	freebsd-elf)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
++
++	irix | nonstopux)
++	  if test "X$lt_irix_increment" = "Xno"; then
++	    func_arith $current - $age
++	  else
++	    func_arith $current - $age + 1
++	  fi
++	  major=$func_arith_result
++
++	  case $version_type in
++	    nonstopux) verstring_prefix=nonstopux ;;
++	    *)         verstring_prefix=sgi ;;
++	  esac
++	  verstring="$verstring_prefix$major.$revision"
++
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$revision
++	  while test "$loop" -ne 0; do
++	    func_arith $revision - $loop
++	    iface=$func_arith_result
++	    func_arith $loop - 1
++	    loop=$func_arith_result
++	    verstring="$verstring_prefix$major.$iface:$verstring"
++	  done
++
++	  # Before this point, $major must not contain `.'.
++	  major=.$major
++	  versuffix="$major.$revision"
++	  ;;
++
++	linux) # correct to gnu/linux during the next big refactor
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix="$major.$age.$revision"
++	  ;;
++
++	osf)
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix=".$current.$age.$revision"
++	  verstring="$current.$age.$revision"
++
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$age
++	  while test "$loop" -ne 0; do
++	    func_arith $current - $loop
++	    iface=$func_arith_result
++	    func_arith $loop - 1
++	    loop=$func_arith_result
++	    verstring="$verstring:${iface}.0"
++	  done
++
++	  # Make executables depend on our current version.
++	  func_append verstring ":${current}.0"
++	  ;;
++
++	qnx)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
++
++	sunos)
++	  major=".$current"
++	  versuffix=".$current.$revision"
++	  ;;
++
++	windows)
++	  # Use '-' rather than '.', since we only want one
++	  # extension on DOS 8.3 filesystems.
++	  func_arith $current - $age
++	  major=$func_arith_result
++	  versuffix="-$major"
++	  ;;
++
++	*)
++	  func_fatal_configuration "unknown library version type \`$version_type'"
++	  ;;
++	esac
++
++	# Clear the version info if we defaulted, and they specified a release.
++	if test -z "$vinfo" && test -n "$release"; then
++	  major=
++	  case $version_type in
++	  darwin)
++	    # we can't check for "0.0" in archive_cmds due to quoting
++	    # problems, so we reset it completely
++	    verstring=
++	    ;;
++	  *)
++	    verstring="0.0"
++	    ;;
++	  esac
++	  if test "$need_version" = no; then
++	    versuffix=
++	  else
++	    versuffix=".0.0"
++	  fi
++	fi
++
++	# Remove version info from name if versioning should be avoided
++	if test "$avoid_version" = yes && test "$need_version" = no; then
++	  major=
++	  versuffix=
++	  verstring=""
++	fi
++
++	# Check to see if the archive will have undefined symbols.
++	if test "$allow_undefined" = yes; then
++	  if test "$allow_undefined_flag" = unsupported; then
++	    func_warning "undefined symbols not allowed in $host shared libraries"
++	    build_libtool_libs=no
++	    build_old_libs=yes
++	  fi
++	else
++	  # Don't allow undefined symbols.
++	  allow_undefined_flag="$no_undefined_flag"
++	fi
++
++      fi
++
++      func_generate_dlsyms "$libname" "$libname" "yes"
++      func_append libobjs " $symfileobj"
++      test "X$libobjs" = "X " && libobjs=
++
++      if test "$opt_mode" != relink; then
++	# Remove our outputs, but don't remove object files since they
++	# may have been created when compiling PIC objects.
++	removelist=
++	tempremovelist=`$ECHO "$output_objdir/*"`
++	for p in $tempremovelist; do
++	  case $p in
++	    *.$objext | *.gcno)
++	       ;;
++	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++	       if test "X$precious_files_regex" != "X"; then
++		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++		 then
++		   continue
++		 fi
++	       fi
++	       func_append removelist " $p"
++	       ;;
++	    *) ;;
++	  esac
++	done
++	test -n "$removelist" && \
++	  func_show_eval "${RM}r \$removelist"
++      fi
++
++      # Now set the variables for building old libraries.
++      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++	func_append oldlibs " $output_objdir/$libname.$libext"
++
++	# Transform .lo files to .o files.
++	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
++      fi
++
++      # Eliminate all temporary directories.
++      #for path in $notinst_path; do
++      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
++      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
++      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
++      #done
++
++      if test -n "$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	temp_xrpath=
++	for libdir in $xrpath; do
++	  func_replace_sysroot "$libdir"
++	  func_append temp_xrpath " -R$func_replace_sysroot_result"
++	  case "$finalize_rpath " in
++	  *" $libdir "*) ;;
++	  *) func_append finalize_rpath " $libdir" ;;
++	  esac
++	done
++	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++	  dependency_libs="$temp_xrpath $dependency_libs"
++	fi
++      fi
++
++      # Make sure dlfiles contains only unique files that won't be dlpreopened
++      old_dlfiles="$dlfiles"
++      dlfiles=
++      for lib in $old_dlfiles; do
++	case " $dlprefiles $dlfiles " in
++	*" $lib "*) ;;
++	*) func_append dlfiles " $lib" ;;
++	esac
++      done
++
++      # Make sure dlprefiles contains only unique files
++      old_dlprefiles="$dlprefiles"
++      dlprefiles=
++      for lib in $old_dlprefiles; do
++	case "$dlprefiles " in
++	*" $lib "*) ;;
++	*) func_append dlprefiles " $lib" ;;
++	esac
++      done
++
++      if test "$build_libtool_libs" = yes; then
++	if test -n "$rpath"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
++	    # these systems don't actually have a c library (as such)!
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C library is in the System framework
++	    func_append deplibs " System.ltframework"
++	    ;;
++	  *-*-netbsd*)
++	    # Don't link with libc until the a.out ld.so is fixed.
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    ;;
++	  *)
++	    # Add libc to deplibs on all other systems if necessary.
++	    if test "$build_libtool_need_lc" = "yes"; then
++	      func_append deplibs " -lc"
++	    fi
++	    ;;
++	  esac
++	fi
++
++	# Transform deplibs into only deplibs that can be linked in shared.
++	name_save=$name
++	libname_save=$libname
++	release_save=$release
++	versuffix_save=$versuffix
++	major_save=$major
++	# I'm not sure if I'm treating the release correctly.  I think
++	# release should show up in the -l (ie -lgmp5) so we don't want to
++	# add it in twice.  Is that correct?
++	release=""
++	versuffix=""
++	major=""
++	newdeplibs=
++	droppeddeps=no
++	case $deplibs_check_method in
++	pass_all)
++	  # Don't check for shared/static.  Everything works.
++	  # This might be a little naive.  We might want to check
++	  # whether the library exists or not.  But this is on
++	  # osf3 & osf4 and I'm not really sure... Just
++	  # implementing what was already the behavior.
++	  newdeplibs=$deplibs
++	  ;;
++	test_compile)
++	  # This code stresses the "libraries are programs" paradigm to its
++	  # limits. Maybe even breaks it.  We compile a program, linking it
++	  # against the deplibs as a proxy for the library.  Then we can check
++	  # whether they linked in statically or dynamically with ldd.
++	  $opt_dry_run || $RM conftest.c
++	  cat > conftest.c <<EOF
++	  int main() { return 0; }
++EOF
++	  $opt_dry_run || $RM conftest
++	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
++	    ldd_output=`ldd conftest`
++	    for i in $deplibs; do
++	      case $i in
++	      -l*)
++		func_stripname -l '' "$i"
++		name=$func_stripname_result
++		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		  case " $predeps $postdeps " in
++		  *" $i "*)
++		    func_append newdeplibs " $i"
++		    i=""
++		    ;;
++		  esac
++		fi
++		if test -n "$i" ; then
++		  libname=`eval "\\$ECHO \"$libname_spec\""`
++		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		  set dummy $deplib_matches; shift
++		  deplib_match=$1
++		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		    func_append newdeplibs " $i"
++		  else
++		    droppeddeps=yes
++		    echo
++		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		    echo "*** I have the capability to make that library automatically link in when"
++		    echo "*** you link to this library.  But I can only do this if you have a"
++		    echo "*** shared version of the library, which I believe you do not have"
++		    echo "*** because a test_compile did reveal that the linker did not use it for"
++		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
++		  fi
++		fi
++		;;
++	      *)
++		func_append newdeplibs " $i"
++		;;
++	      esac
++	    done
++	  else
++	    # Error occurred in the first compile.  Let's try to salvage
++	    # the situation: Compile a separate program for each library.
++	    for i in $deplibs; do
++	      case $i in
++	      -l*)
++		func_stripname -l '' "$i"
++		name=$func_stripname_result
++		$opt_dry_run || $RM conftest
++		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
++		  ldd_output=`ldd conftest`
++		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		    case " $predeps $postdeps " in
++		    *" $i "*)
++		      func_append newdeplibs " $i"
++		      i=""
++		      ;;
++		    esac
++		  fi
++		  if test -n "$i" ; then
++		    libname=`eval "\\$ECHO \"$libname_spec\""`
++		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		    set dummy $deplib_matches; shift
++		    deplib_match=$1
++		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		      func_append newdeplibs " $i"
++		    else
++		      droppeddeps=yes
++		      echo
++		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		      echo "*** I have the capability to make that library automatically link in when"
++		      echo "*** you link to this library.  But I can only do this if you have a"
++		      echo "*** shared version of the library, which you do not appear to have"
++		      echo "*** because a test_compile did reveal that the linker did not use this one"
++		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++		    fi
++		  fi
++		else
++		  droppeddeps=yes
++		  echo
++		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
++		  echo "*** make it link in!  You will probably need to install it or some"
++		  echo "*** library that it depends on before this library will be fully"
++		  echo "*** functional.  Installing it before continuing would be even better."
++		fi
++		;;
++	      *)
++		func_append newdeplibs " $i"
++		;;
++	      esac
++	    done
++	  fi
++	  ;;
++	file_magic*)
++	  set dummy $deplibs_check_method; shift
++	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    case $a_deplib in
++	    -l*)
++	      func_stripname -l '' "$a_deplib"
++	      name=$func_stripname_result
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  func_append newdeplibs " $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		if test -n "$file_magic_glob"; then
++		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
++		else
++		  libnameglob=$libname
++		fi
++		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  if test "$want_nocaseglob" = yes; then
++		    shopt -s nocaseglob
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		    $nocaseglob
++		  else
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		  fi
++		  for potent_lib in $potential_libs; do
++		      # Follow soft links.
++		      if ls -lLd "$potent_lib" 2>/dev/null |
++			 $GREP " -> " >/dev/null; then
++			continue
++		      fi
++		      # The statement above tries to avoid entering an
++		      # endless loop below, in case of cyclic links.
++		      # We might still enter an endless loop, since a link
++		      # loop can be closed while we follow links,
++		      # but so what?
++		      potlib="$potent_lib"
++		      while test -h "$potlib" 2>/dev/null; do
++			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
++			case $potliblink in
++			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
++			esac
++		      done
++		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
++			 $SED -e 10q |
++			 $EGREP "$file_magic_regex" > /dev/null; then
++			func_append newdeplibs " $a_deplib"
++			a_deplib=""
++			break 2
++		      fi
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		echo
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a file magic. Last file checked: $potlib"
++		fi
++	      fi
++	      ;;
++	    *)
++	      # Add a -L argument.
++	      func_append newdeplibs " $a_deplib"
++	      ;;
++	    esac
++	  done # Gone through all deplibs.
++	  ;;
++	match_pattern*)
++	  set dummy $deplibs_check_method; shift
++	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    case $a_deplib in
++	    -l*)
++	      func_stripname -l '' "$a_deplib"
++	      name=$func_stripname_result
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  func_append newdeplibs " $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
++		    potlib="$potent_lib" # see symlink-check above in file_magic test
++		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
++		       $EGREP "$match_pattern_regex" > /dev/null; then
++		      func_append newdeplibs " $a_deplib"
++		      a_deplib=""
++		      break 2
++		    fi
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		echo
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
++		fi
++	      fi
++	      ;;
++	    *)
++	      # Add a -L argument.
++	      func_append newdeplibs " $a_deplib"
++	      ;;
++	    esac
++	  done # Gone through all deplibs.
++	  ;;
++	none | unknown | *)
++	  newdeplibs=""
++	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
++	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	    for i in $predeps $postdeps ; do
++	      # can't use Xsed below, because $i might contain '/'
++	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
++	    done
++	  fi
++	  case $tmp_deplibs in
++	  *[!\	\ ]*)
++	    echo
++	    if test "X$deplibs_check_method" = "Xnone"; then
++	      echo "*** Warning: inter-library dependencies are not supported in this platform."
++	    else
++	      echo "*** Warning: inter-library dependencies are not known to be supported."
++	    fi
++	    echo "*** All declared inter-library dependencies are being dropped."
++	    droppeddeps=yes
++	    ;;
++	  esac
++	  ;;
++	esac
++	versuffix=$versuffix_save
++	major=$major_save
++	release=$release_save
++	libname=$libname_save
++	name=$name_save
+ 
+-    if test ! -d \"\$progdir\"; then
+-      $mkdir \"\$progdir\"
+-    else
+-      $rm \"\$progdir/\$file\"
+-    fi"
++	case $host in
++	*-*-rhapsody* | *-*-darwin1.[012])
++	  # On Rhapsody replace the C library with the System framework
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
++	  ;;
++	esac
+ 
+-	  $echo >> $output "\
++	if test "$droppeddeps" = yes; then
++	  if test "$module" = yes; then
++	    echo
++	    echo "*** Warning: libtool could not satisfy all declared inter-library"
++	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
++	    echo "*** a static module, that should work as long as the dlopening"
++	    echo "*** application is linked with the -dlopen flag."
++	    if test -z "$global_symbol_pipe"; then
++	      echo
++	      echo "*** However, this would only work if libtool was able to extract symbol"
++	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++	      echo "*** not find such a program.  So, this module is probably useless."
++	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	    fi
++	    if test "$build_old_libs" = no; then
++	      oldlibs="$output_objdir/$libname.$libext"
++	      build_libtool_libs=module
++	      build_old_libs=yes
++	    else
++	      build_libtool_libs=no
++	    fi
++	  else
++	    echo "*** The inter-library dependencies that have been dropped here will be"
++	    echo "*** automatically added whenever a program is linked with this library"
++	    echo "*** or is declared to -dlopen it."
+ 
+-    # relink executable if necessary
+-    if test -n \"\$relink_command\"; then
+-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+-      else
+-	$echo \"\$relink_command_output\" >&2
+-	$rm \"\$progdir/\$file\"
+-	exit $EXIT_FAILURE
++	    if test "$allow_undefined" = no; then
++	      echo
++	      echo "*** Since this library must not contain undefined symbols,"
++	      echo "*** because either the platform does not support them or"
++	      echo "*** it was explicitly requested with -no-undefined,"
++	      echo "*** libtool will only create a static version of it."
++	      if test "$build_old_libs" = no; then
++		oldlibs="$output_objdir/$libname.$libext"
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  fi
++	fi
++	# Done checking deplibs!
++	deplibs=$newdeplibs
+       fi
+-    fi
++      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++      case $host in
++	*-*-darwin*)
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  ;;
++      esac
+ 
+-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+-    { $rm \"\$progdir/\$program\";
+-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+-    $rm \"\$progdir/\$file\"
+-  fi"
+-	else
+-	  $echo >> $output "\
+-  program='$outputname'
+-  progdir=\"\$thisdir/$objdir\"
+-"
+-	fi
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $deplibs " in
++	  *" -L$path/$objdir "*)
++	    func_append new_libs " -L$path/$objdir" ;;
++	  esac
++	  ;;
++	esac
++      done
++      for deplib in $deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) func_append new_libs " $deplib" ;;
++	  esac
++	  ;;
++	*) func_append new_libs " $deplib" ;;
++	esac
++      done
++      deplibs="$new_libs"
+ 
+-	$echo >> $output "\
++      # All the library-specific variables (install_libdir is set above).
++      library_names=
++      old_library=
++      dlname=
+ 
+-  if test -f \"\$progdir/\$program\"; then"
++      # Test again, we may have decided not to build it any more
++      if test "$build_libtool_libs" = yes; then
++	# Remove ${wl} instances when linking with ld.
++	# FIXME: should test the right _cmds variable.
++	case $archive_cmds in
++	  *\$LD\ *) wl= ;;
++        esac
++	if test "$hardcode_into_libs" = yes; then
++	  # Hardcode the library paths
++	  hardcode_libdirs=
++	  dep_rpath=
++	  rpath="$finalize_rpath"
++	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
++	  for libdir in $rpath; do
++	    if test -n "$hardcode_libdir_flag_spec"; then
++	      if test -n "$hardcode_libdir_separator"; then
++		func_replace_sysroot "$libdir"
++		libdir=$func_replace_sysroot_result
++		if test -z "$hardcode_libdirs"; then
++		  hardcode_libdirs="$libdir"
++		else
++		  # Just accumulate the unique libdirs.
++		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		    ;;
++		  *)
++		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		    ;;
++		  esac
++		fi
++	      else
++		eval flag=\"$hardcode_libdir_flag_spec\"
++		func_append dep_rpath " $flag"
++	      fi
++	    elif test -n "$runpath_var"; then
++	      case "$perm_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_append perm_rpath " $libdir" ;;
++	      esac
++	    fi
++	  done
++	  # Substitute the hardcoded libdirs into the rpath.
++	  if test -n "$hardcode_libdir_separator" &&
++	     test -n "$hardcode_libdirs"; then
++	    libdir="$hardcode_libdirs"
++	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
++	  fi
++	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
++	    # We should set the runpath_var.
++	    rpath=
++	    for dir in $perm_rpath; do
++	      func_append rpath "$dir:"
++	    done
++	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++	  fi
++	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++	fi
+ 
+-	# Export our shlibpath_var if we have one.
+-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+-	  $echo >> $output "\
+-    # Add our own library path to $shlibpath_var
+-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++	shlibpath="$finalize_shlibpath"
++	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++	if test -n "$shlibpath"; then
++	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++	fi
+ 
+-    # Some systems cannot cope with colon-terminated $shlibpath_var
+-    # The second colon is a workaround for a bug in BeOS R4 sed
+-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++	# Get the real and link names of the library.
++	eval shared_ext=\"$shrext_cmds\"
++	eval library_names=\"$library_names_spec\"
++	set dummy $library_names
++	shift
++	realname="$1"
++	shift
+ 
+-    export $shlibpath_var
+-"
++	if test -n "$soname_spec"; then
++	  eval soname=\"$soname_spec\"
++	else
++	  soname="$realname"
+ 	fi
+-
+-	# fixup the dll searchpath if we need to.
+-	if test -n "$dllsearchpath"; then
+-	  $echo >> $output "\
+-    # Add the dll search path components to the executable PATH
+-    PATH=$dllsearchpath:\$PATH
+-"
++	if test -z "$dlname"; then
++	  dlname=$soname
+ 	fi
+ 
+-	$echo >> $output "\
+-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-      # Run the actual program with our arguments.
+-"
+-	case $host in
+-	# Backslashes separate directories on plain windows
+-	*-*-mingw | *-*-os2*)
+-	  $echo >> $output "\
+-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+-"
+-	  ;;
++	lib="$output_objdir/$realname"
++	linknames=
++	for link
++	do
++	  func_append linknames " $link"
++	done
+ 
+-	*)
+-	  $echo >> $output "\
+-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+-"
++	# Use standard objects if they are pic
++	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	test "X$libobjs" = "X " && libobjs=
++
++	delfiles=
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
++	  export_symbols="$output_objdir/$libname.uexp"
++	  func_append delfiles " $export_symbols"
++	fi
++
++	orig_export_symbols=
++	case $host_os in
++	cygwin* | mingw* | cegcc*)
++	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
++	    # exporting using user supplied symfile
++	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
++	      # and it's NOT already a .def file. Must figure out
++	      # which of the given symbols are data symbols and tag
++	      # them as such. So, trigger use of export_symbols_cmds.
++	      # export_symbols gets reassigned inside the "prepare
++	      # the list of exported symbols" if statement, so the
++	      # include_expsyms logic still works.
++	      orig_export_symbols="$export_symbols"
++	      export_symbols=
++	      always_export_symbols=yes
++	    fi
++	  fi
+ 	  ;;
+ 	esac
+-	$echo >> $output "\
+-      \$echo \"\$0: cannot exec \$program \$*\"
+-      exit $EXIT_FAILURE
+-    fi
+-  else
+-    # The program doesn't exist.
+-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+-    exit $EXIT_FAILURE
+-  fi
+-fi\
+-"
+-	chmod +x $output
+-      fi
+-      exit $EXIT_SUCCESS
+-      ;;
+-    esac
+-
+-    # See if we need to build an old-fashioned archive.
+-    for oldlib in $oldlibs; do
+ 
+-      if test "$build_libtool_libs" = convenience; then
+-	oldobjs="$libobjs_save"
+-	addlibs="$convenience"
+-	build_libtool_libs=no
+-      else
+-	if test "$build_libtool_libs" = module; then
+-	  oldobjs="$libobjs_save"
+-	  build_libtool_libs=no
+-	else
+-	  oldobjs="$old_deplibs $non_pic_objects"
++	# Prepare the list of exported symbols
++	if test -z "$export_symbols"; then
++	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++	    func_verbose "generating symbol list for \`$libname.la'"
++	    export_symbols="$output_objdir/$libname.exp"
++	    $opt_dry_run || $RM $export_symbols
++	    cmds=$export_symbols_cmds
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd1 in $cmds; do
++	      IFS="$save_ifs"
++	      # Take the normal branch if the nm_file_list_spec branch
++	      # doesn't work or if tool conversion is not needed.
++	      case $nm_file_list_spec~$to_tool_file_cmd in
++		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
++		  try_normal_branch=yes
++		  eval cmd=\"$cmd1\"
++		  func_len " $cmd"
++		  len=$func_len_result
++		  ;;
++		*)
++		  try_normal_branch=no
++		  ;;
++	      esac
++	      if test "$try_normal_branch" = yes \
++		 && { test "$len" -lt "$max_cmd_len" \
++		      || test "$max_cmd_len" -le -1; }
++	      then
++		func_show_eval "$cmd" 'exit $?'
++		skipped_export=false
++	      elif test -n "$nm_file_list_spec"; then
++		func_basename "$output"
++		output_la=$func_basename_result
++		save_libobjs=$libobjs
++		save_output=$output
++		output=${output_objdir}/${output_la}.nm
++		func_to_tool_file "$output"
++		libobjs=$nm_file_list_spec$func_to_tool_file_result
++		func_append delfiles " $output"
++		func_verbose "creating $NM input file list: $output"
++		for obj in $save_libobjs; do
++		  func_to_tool_file "$obj"
++		  $ECHO "$func_to_tool_file_result"
++		done > "$output"
++		eval cmd=\"$cmd1\"
++		func_show_eval "$cmd" 'exit $?'
++		output=$save_output
++		libobjs=$save_libobjs
++		skipped_export=false
++	      else
++		# The command line is too long to execute in one step.
++		func_verbose "using reloadable object file for export list..."
++		skipped_export=:
++		# Break out early, otherwise skipped_export may be
++		# set to false by a later but shorter cmd.
++		break
++	      fi
++	    done
++	    IFS="$save_ifs"
++	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
++	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	    fi
++	  fi
+ 	fi
+-	addlibs="$old_convenience"
+-      fi
+-
+-      if test -n "$addlibs"; then
+-	gentop="$output_objdir/${outputname}x"
+-	generated="$generated $gentop"
+ 
+-	func_extract_archives $gentop $addlibs
+-	oldobjs="$oldobjs $func_extract_archives_result"
+-      fi
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  tmp_export_symbols="$export_symbols"
++	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++	fi
++
++	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
++	  # The given exports_symbols file has to be filtered, so filter it.
++	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
++	  # 's' commands which not all seds can handle. GNU sed should be fine
++	  # though. Also, the filter scales superlinearly with the number of
++	  # global variables. join(1) would be nice here, but unfortunately
++	  # isn't a blessed tool.
++	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++	  export_symbols=$output_objdir/$libname.def
++	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++	fi
+ 
+-      # Do each command in the archive commands.
+-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+-       cmds=$old_archive_from_new_cmds
+-      else
+-	# POSIX demands no paths to be encoded in archives.  We have
+-	# to avoid creating archives with duplicate basenames if we
+-	# might have to extract them afterwards, e.g., when creating a
+-	# static archive out of a convenience library, or when linking
+-	# the entirety of a libtool archive into another (currently
+-	# not supported by libtool).
+-	if (for obj in $oldobjs
+-	    do
+-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+-	    done | sort | sort -uc >/dev/null 2>&1); then
+-	  :
+-	else
+-	  $echo "copying selected object files to avoid basename conflicts..."
++	tmp_deplibs=
++	for test_deplib in $deplibs; do
++	  case " $convenience " in
++	  *" $test_deplib "*) ;;
++	  *)
++	    func_append tmp_deplibs " $test_deplib"
++	    ;;
++	  esac
++	done
++	deplibs="$tmp_deplibs"
+ 
+-	  if test -z "$gentop"; then
++	if test -n "$convenience"; then
++	  if test -n "$whole_archive_flag_spec" &&
++	    test "$compiler_needs_object" = yes &&
++	    test -z "$libobjs"; then
++	    # extract the archives, so we have objects to list.
++	    # TODO: could optimize this to just extract one archive.
++	    whole_archive_flag_spec=
++	  fi
++	  if test -n "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	    test "X$libobjs" = "X " && libobjs=
++	  else
+ 	    gentop="$output_objdir/${outputname}x"
+-	    generated="$generated $gentop"
++	    func_append generated " $gentop"
+ 
+-	    $show "${rm}r $gentop"
+-	    $run ${rm}r "$gentop"
+-	    $show "$mkdir $gentop"
+-	    $run $mkdir "$gentop"
+-	    exit_status=$?
+-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+-	      exit $exit_status
+-	    fi
++	    func_extract_archives $gentop $convenience
++	    func_append libobjs " $func_extract_archives_result"
++	    test "X$libobjs" = "X " && libobjs=
+ 	  fi
++	fi
+ 
+-	  save_oldobjs=$oldobjs
+-	  oldobjs=
+-	  counter=1
+-	  for obj in $save_oldobjs
+-	  do
+-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+-	    case " $oldobjs " in
+-	    " ") oldobjs=$obj ;;
+-	    *[\ /]"$objbase "*)
+-	      while :; do
+-		# Make sure we don't pick an alternate name that also
+-		# overlaps.
+-		newobj=lt$counter-$objbase
+-		counter=`expr $counter + 1`
+-		case " $oldobjs " in
+-		*[\ /]"$newobj "*) ;;
+-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+-		esac
+-	      done
+-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+-	      $run ln "$obj" "$gentop/$newobj" ||
+-	      $run cp "$obj" "$gentop/$newobj"
+-	      oldobjs="$oldobjs $gentop/$newobj"
+-	      ;;
+-	    *) oldobjs="$oldobjs $obj" ;;
+-	    esac
+-	  done
++	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++	  eval flag=\"$thread_safe_flag_spec\"
++	  func_append linker_flags " $flag"
+ 	fi
+ 
+-	eval cmds=\"$old_archive_cmds\"
++	# Make a backup of the uninstalled library when relinking
++	if test "$opt_mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
++	fi
+ 
+-	if len=`expr "X$cmds" : ".*"` &&
+-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+-	  cmds=$old_archive_cmds
++	# Do each of the archive commands.
++	if test "$module" = yes && test -n "$module_cmds" ; then
++	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	    eval test_cmds=\"$module_expsym_cmds\"
++	    cmds=$module_expsym_cmds
++	  else
++	    eval test_cmds=\"$module_cmds\"
++	    cmds=$module_cmds
++	  fi
+ 	else
+-	  # the command line is too long to link in one step, link in parts
+-	  $echo "using piecewise archive linking..."
+-	  save_RANLIB=$RANLIB
+-	  RANLIB=:
+-	  objlist=
+-	  concat_cmds=
+-	  save_oldobjs=$oldobjs
+-
+-	  # Is there a better way of finding the last object in the list?
+-	  for obj in $save_oldobjs
+-	  do
+-	    last_oldobj=$obj
+-	  done
+-	  for obj in $save_oldobjs
+-	  do
+-	    oldobjs="$objlist $obj"
+-	    objlist="$objlist $obj"
+-	    eval test_cmds=\"$old_archive_cmds\"
+-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+-	       test "$len" -le "$max_cmd_len"; then
+-	      :
+-	    else
+-	      # the above command should be used before it gets too long
+-	      oldobjs=$objlist
+-	      if test "$obj" = "$last_oldobj" ; then
+-	        RANLIB=$save_RANLIB
+-	      fi
+-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+-	      objlist=
+-	    fi
+-	  done
+-	  RANLIB=$save_RANLIB
+-	  oldobjs=$objlist
+-	  if test "X$oldobjs" = "X" ; then
+-	    eval cmds=\"\$concat_cmds\"
++	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	    eval test_cmds=\"$archive_expsym_cmds\"
++	    cmds=$archive_expsym_cmds
+ 	  else
+-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++	    eval test_cmds=\"$archive_cmds\"
++	    cmds=$archive_cmds
+ 	  fi
+ 	fi
+-      fi
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-        eval cmd=\"$cmd\"
+-	IFS="$save_ifs"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
+-    done
+-
+-    if test -n "$generated"; then
+-      $show "${rm}r$generated"
+-      $run ${rm}r$generated
+-    fi
+ 
+-    # Now create the libtool archive.
+-    case $output in
+-    *.la)
+-      old_library=
+-      test "$build_old_libs" = yes && old_library="$libname.$libext"
+-      $show "creating $output"
+-
+-      # Preserve any variables that may affect compiler behavior
+-      for var in $variables_saved_for_relink; do
+-	if eval test -z \"\${$var+set}\"; then
+-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+-	elif eval var_value=\$$var; test -z "$var_value"; then
+-	  relink_command="$var=; export $var; $relink_command"
++	if test "X$skipped_export" != "X:" &&
++	   func_len " $test_cmds" &&
++	   len=$func_len_result &&
++	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  :
+ 	else
+-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+-	fi
+-      done
+-      # Quote the link command for shipping.
+-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+-      if test "$hardcode_automatic" = yes ; then
+-	relink_command=
+-      fi
++	  # The command line is too long to link in one step, link piecewise
++	  # or, if using GNU ld and skipped_export is not :, use a linker
++	  # script.
++
++	  # Save the value of $output and $libobjs because we want to
++	  # use them later.  If we have whole_archive_flag_spec, we
++	  # want to use save_libobjs as it was before
++	  # whole_archive_flag_spec was expanded, because we can't
++	  # assume the linker understands whole_archive_flag_spec.
++	  # This may have to be revisited, in case too many
++	  # convenience libraries get linked in and end up exceeding
++	  # the spec.
++	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	  fi
++	  save_output=$output
++	  func_basename "$output"
++	  output_la=$func_basename_result
+ 
++	  # Clear the reloadable object creation command queue and
++	  # initialize k to one.
++	  test_cmds=
++	  concat_cmds=
++	  objlist=
++	  last_robj=
++	  k=1
+ 
+-      # Only create the output if not a dry run.
+-      if test -z "$run"; then
+-	for installed in no yes; do
+-	  if test "$installed" = yes; then
+-	    if test -z "$install_libdir"; then
+-	      break
++	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
++	    output=${output_objdir}/${output_la}.lnkscript
++	    func_verbose "creating GNU ld script: $output"
++	    echo 'INPUT (' > $output
++	    for obj in $save_libobjs
++	    do
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
++	    done
++	    echo ')' >> $output
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$func_to_tool_file_result
++	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
++	    output=${output_objdir}/${output_la}.lnk
++	    func_verbose "creating linker input file list: $output"
++	    : > $output
++	    set x $save_libobjs
++	    shift
++	    firstobj=
++	    if test "$compiler_needs_object" = yes; then
++	      firstobj="$1 "
++	      shift
+ 	    fi
+-	    output="$output_objdir/$outputname"i
+-	    # Replace all uninstalled libtool libraries with the installed ones
+-	    newdependency_libs=
+-	    for deplib in $dependency_libs; do
+-	      case $deplib in
+-	      *.la)
+-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+-		if test -z "$libdir"; then
+-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+-		  exit $EXIT_FAILURE
+-		fi
+-		newdependency_libs="$newdependency_libs $libdir/$name"
+-		;;
+-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+-	      esac
++	    for obj
++	    do
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
+ 	    done
+-	    dependency_libs="$newdependency_libs"
+-	    newdlfiles=
+-	    for lib in $dlfiles; do
+-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+-	      if test -z "$libdir"; then
+-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-		exit $EXIT_FAILURE
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
++	  else
++	    if test -n "$save_libobjs"; then
++	      func_verbose "creating reloadable object files..."
++	      output=$output_objdir/$output_la-${k}.$objext
++	      eval test_cmds=\"$reload_cmds\"
++	      func_len " $test_cmds"
++	      len0=$func_len_result
++	      len=$len0
++
++	      # Loop over the list of objects to be linked.
++	      for obj in $save_libobjs
++	      do
++		func_len " $obj"
++		func_arith $len + $func_len_result
++		len=$func_arith_result
++		if test "X$objlist" = X ||
++		   test "$len" -lt "$max_cmd_len"; then
++		  func_append objlist " $obj"
++		else
++		  # The command $test_cmds is almost too long, add a
++		  # command to the queue.
++		  if test "$k" -eq 1 ; then
++		    # The first file doesn't have a previous command to add.
++		    reload_objs=$objlist
++		    eval concat_cmds=\"$reload_cmds\"
++		  else
++		    # All subsequent reloadable object files will link in
++		    # the last one created.
++		    reload_objs="$objlist $last_robj"
++		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
++		  fi
++		  last_robj=$output_objdir/$output_la-${k}.$objext
++		  func_arith $k + 1
++		  k=$func_arith_result
++		  output=$output_objdir/$output_la-${k}.$objext
++		  objlist=" $obj"
++		  func_len " $last_robj"
++		  func_arith $len0 + $func_len_result
++		  len=$func_arith_result
++		fi
++	      done
++	      # Handle the remaining objects by creating one last
++	      # reloadable object file.  All subsequent reloadable object
++	      # files will link in the last one created.
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      reload_objs="$objlist $last_robj"
++	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
++	      if test -n "$last_robj"; then
++	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ 	      fi
+-	      newdlfiles="$newdlfiles $libdir/$name"
+-	    done
+-	    dlfiles="$newdlfiles"
+-	    newdlprefiles=
+-	    for lib in $dlprefiles; do
+-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+-	      if test -z "$libdir"; then
+-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-		exit $EXIT_FAILURE
++	      func_append delfiles " $output"
++
++	    else
++	      output=
++	    fi
++
++	    if ${skipped_export-false}; then
++	      func_verbose "generating symbol list for \`$libname.la'"
++	      export_symbols="$output_objdir/$libname.exp"
++	      $opt_dry_run || $RM $export_symbols
++	      libobjs=$output
++	      # Append the command to create the export file.
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
++	      if test -n "$last_robj"; then
++		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ 	      fi
+-	      newdlprefiles="$newdlprefiles $libdir/$name"
++	    fi
++
++	    test -n "$save_libobjs" &&
++	      func_verbose "creating a temporary reloadable object file: $output"
++
++	    # Loop through the commands generated above and execute them.
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd in $concat_cmds; do
++	      IFS="$save_ifs"
++	      $opt_silent || {
++		  func_quote_for_expand "$cmd"
++		  eval "func_echo $func_quote_for_expand_result"
++	      }
++	      $opt_dry_run || eval "$cmd" || {
++		lt_exit=$?
++
++		# Restore the uninstalled library and exit
++		if test "$opt_mode" = relink; then
++		  ( cd "$output_objdir" && \
++		    $RM "${realname}T" && \
++		    $MV "${realname}U" "$realname" )
++		fi
++
++		exit $lt_exit
++	      }
+ 	    done
+-	    dlprefiles="$newdlprefiles"
++	    IFS="$save_ifs"
++
++	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
++	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	    fi
++	  fi
++
++          if ${skipped_export-false}; then
++	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	      tmp_export_symbols="$export_symbols"
++	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++	    fi
++
++	    if test -n "$orig_export_symbols"; then
++	      # The given exports_symbols file has to be filtered, so filter it.
++	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
++	      # 's' commands which not all seds can handle. GNU sed should be fine
++	      # though. Also, the filter scales superlinearly with the number of
++	      # global variables. join(1) would be nice here, but unfortunately
++	      # isn't a blessed tool.
++	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++	      export_symbols=$output_objdir/$libname.def
++	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++	    fi
++	  fi
++
++	  libobjs=$output
++	  # Restore the value of output.
++	  output=$save_output
++
++	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	    test "X$libobjs" = "X " && libobjs=
++	  fi
++	  # Expand the library linking commands again to reset the
++	  # value of $libobjs for piecewise linking.
++
++	  # Do each of the archive commands.
++	  if test "$module" = yes && test -n "$module_cmds" ; then
++	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	      cmds=$module_expsym_cmds
++	    else
++	      cmds=$module_cmds
++	    fi
+ 	  else
+-	    newdlfiles=
+-	    for lib in $dlfiles; do
+-	      case $lib in
+-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+-		*) abs=`pwd`"/$lib" ;;
+-	      esac
+-	      newdlfiles="$newdlfiles $abs"
+-	    done
+-	    dlfiles="$newdlfiles"
+-	    newdlprefiles=
+-	    for lib in $dlprefiles; do
+-	      case $lib in
+-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+-		*) abs=`pwd`"/$lib" ;;
+-	      esac
+-	      newdlprefiles="$newdlprefiles $abs"
+-	    done
+-	    dlprefiles="$newdlprefiles"
++	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	      cmds=$archive_expsym_cmds
++	    else
++	      cmds=$archive_cmds
++	    fi
+ 	  fi
+-	  $rm $output
+-	  # place dlname in correct position for cygwin
+-	  tdlname=$dlname
+-	  case $host,$output,$installed,$module,$dlname in
+-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+-	  esac
+-	  $echo > $output "\
+-# $outputname - a libtool library file
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# Please DO NOT delete this file!
+-# It is necessary for linking the library.
++	fi
+ 
+-# The name that we can dlopen(3).
+-dlname='$tdlname'
++	if test -n "$delfiles"; then
++	  # Append the command to remove temporary files to $cmds.
++	  eval cmds=\"\$cmds~\$RM $delfiles\"
++	fi
+ 
+-# Names of this library.
+-library_names='$library_names'
++	# Add any objects from preloaded convenience libraries
++	if test -n "$dlprefiles"; then
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
+ 
+-# The name of the static archive.
+-old_library='$old_library'
++	  func_extract_archives $gentop $dlprefiles
++	  func_append libobjs " $func_extract_archives_result"
++	  test "X$libobjs" = "X " && libobjs=
++	fi
+ 
+-# Libraries that this one depends upon.
+-dependency_libs='$dependency_libs'
++	save_ifs="$IFS"; IFS='~'
++	for cmd in $cmds; do
++	  IFS="$save_ifs"
++	  eval cmd=\"$cmd\"
++	  $opt_silent || {
++	    func_quote_for_expand "$cmd"
++	    eval "func_echo $func_quote_for_expand_result"
++	  }
++	  $opt_dry_run || eval "$cmd" || {
++	    lt_exit=$?
+ 
+-# Version information for $libname.
+-current=$current
+-age=$age
+-revision=$revision
++	    # Restore the uninstalled library and exit
++	    if test "$opt_mode" = relink; then
++	      ( cd "$output_objdir" && \
++	        $RM "${realname}T" && \
++		$MV "${realname}U" "$realname" )
++	    fi
+ 
+-# Is this an already installed library?
+-installed=$installed
++	    exit $lt_exit
++	  }
++	done
++	IFS="$save_ifs"
+ 
+-# Should we warn about portability when linking against -modules?
+-shouldnotlink=$module
++	# Restore the uninstalled library and exit
++	if test "$opt_mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+ 
+-# Files to dlopen/dlpreopen
+-dlopen='$dlfiles'
+-dlpreopen='$dlprefiles'
++	  if test -n "$convenience"; then
++	    if test -z "$whole_archive_flag_spec"; then
++	      func_show_eval '${RM}r "$gentop"'
++	    fi
++	  fi
++
++	  exit $EXIT_SUCCESS
++	fi
+ 
+-# Directory that this library needs to be installed in:
+-libdir='$install_libdir'"
+-	  if test "$installed" = no && test "$need_relink" = yes; then
+-	    $echo >> $output "\
+-relink_command=\"$relink_command\""
++	# Create links to the real library.
++	for linkname in $linknames; do
++	  if test "$realname" != "$linkname"; then
++	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ 	  fi
+ 	done
+-      fi
+ 
+-      # Do a symbolic link so that the libtool archive can be found in
+-      # LD_LIBRARY_PATH before the program is installed.
+-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
++	# If -module or -export-dynamic was specified, set the dlname.
++	if test "$module" = yes || test "$export_dynamic" = yes; then
++	  # On all known operating systems, these are identical.
++	  dlname="$soname"
++	fi
++      fi
+       ;;
+-    esac
+-    exit $EXIT_SUCCESS
+-    ;;
+ 
+-  # libtool install mode
+-  install)
+-    modename="$modename: install"
++    obj)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for objects"
++      fi
+ 
+-    # There may be an optional sh(1) argument at the beginning of
+-    # install_prog (especially on Windows NT).
+-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+-       # Allow the use of GNU shtool's install command.
+-       $echo "X$nonopt" | grep shtool > /dev/null; then
+-      # Aesthetically quote it.
+-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	arg="\"$arg\""
+-	;;
++      case " $deplibs" in
++      *\ -l* | *\ -L*)
++	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+       esac
+-      install_prog="$arg "
+-      arg="$1"
+-      shift
+-    else
+-      install_prog=
+-      arg=$nonopt
+-    fi
+ 
+-    # The real first argument should be the name of the installation program.
+-    # Aesthetically quote it.
+-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-    case $arg in
+-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-      arg="\"$arg\""
+-      ;;
+-    esac
+-    install_prog="$install_prog$arg"
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for objects"
+ 
+-    # We need to accept at least all the BSD install flags.
+-    dest=
+-    files=
+-    opts=
+-    prev=
+-    install_type=
+-    isdir=no
+-    stripme=
+-    for arg
+-    do
+-      if test -n "$dest"; then
+-	files="$files $dest"
+-	dest=$arg
+-	continue
+-      fi
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for objects"
+ 
+-      case $arg in
+-      -d) isdir=yes ;;
+-      -f) 
+-      	case " $install_prog " in
+-	*[\\\ /]cp\ *) ;;
+-	*) prev=$arg ;;
+-	esac
+-	;;
+-      -g | -m | -o) prev=$arg ;;
+-      -s)
+-	stripme=" -s"
+-	continue
+-	;;
+-      -*)
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for objects"
++
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for objects"
++
++      case $output in
++      *.lo)
++	test -n "$objs$old_deplibs" && \
++	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
++
++	libobj=$output
++	func_lo2o "$libobj"
++	obj=$func_lo2o_result
+ 	;;
+       *)
+-	# If the previous option needed an argument, then skip it.
+-	if test -n "$prev"; then
+-	  prev=
+-	else
+-	  dest=$arg
+-	  continue
+-	fi
++	libobj=
++	obj="$output"
+ 	;;
+       esac
+ 
+-      # Aesthetically quote the argument.
+-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	arg="\"$arg\""
+-	;;
+-      esac
+-      install_prog="$install_prog $arg"
+-    done
++      # Delete the old objects.
++      $opt_dry_run || $RM $obj $libobj
+ 
+-    if test -z "$install_prog"; then
+-      $echo "$modename: you must specify an install program" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++      # Objects from convenience libraries.  This assumes
++      # single-version convenience libraries.  Whenever we create
++      # different ones for PIC/non-PIC, this we'll have to duplicate
++      # the extraction.
++      reload_conv_objs=
++      gentop=
++      # reload_cmds runs $LD directly, so let us get rid of
++      # -Wl from whole_archive_flag_spec and hope we can get by with
++      # turning comma into space..
++      wl=
+ 
+-    if test -n "$prev"; then
+-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++      if test -n "$convenience"; then
++	if test -n "$whole_archive_flag_spec"; then
++	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
++	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
++	else
++	  gentop="$output_objdir/${obj}x"
++	  func_append generated " $gentop"
+ 
+-    if test -z "$files"; then
+-      if test -z "$dest"; then
+-	$echo "$modename: no file or destination specified" 1>&2
+-      else
+-	$echo "$modename: you must specify a destination" 1>&2
++	  func_extract_archives $gentop $convenience
++	  reload_conv_objs="$reload_objs $func_extract_archives_result"
++	fi
+       fi
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
+ 
+-    # Strip any trailing slash from the destination.
+-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
++      # If we're not building shared, we need to use non_pic_objs
++      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ 
+-    # Check to see that the destination is a directory.
+-    test -d "$dest" && isdir=yes
+-    if test "$isdir" = yes; then
+-      destdir="$dest"
+-      destname=
+-    else
+-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+-      test "X$destdir" = "X$dest" && destdir=.
+-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
++      # Create the old-style object.
++      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ 
+-      # Not a directory, so check to see that there is only one file specified.
+-      set dummy $files
+-      if test "$#" -gt 2; then
+-	$echo "$modename: \`$dest' is not a directory" 1>&2
+-	$echo "$help" 1>&2
+-	exit $EXIT_FAILURE
++      output="$obj"
++      func_execute_cmds "$reload_cmds" 'exit $?'
++
++      # Exit if we aren't doing a library object file.
++      if test -z "$libobj"; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
++	fi
++
++	exit $EXIT_SUCCESS
+       fi
+-    fi
+-    case $destdir in
+-    [\\/]* | [A-Za-z]:[\\/]*) ;;
+-    *)
+-      for file in $files; do
+-	case $file in
+-	*.lo) ;;
+-	*)
+-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
+-      done
++
++      if test "$build_libtool_libs" != yes; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
++	fi
++
++	# Create an invalid libtool object if no PIC, so that we don't
++	# accidentally link it into a program.
++	# $show "echo timestamp > $libobj"
++	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
++	exit $EXIT_SUCCESS
++      fi
++
++      if test -n "$pic_flag" || test "$pic_mode" != default; then
++	# Only do commands if we really have different PIC objects.
++	reload_objs="$libobjs $reload_conv_objs"
++	output="$libobj"
++	func_execute_cmds "$reload_cmds" 'exit $?'
++      fi
++
++      if test -n "$gentop"; then
++	func_show_eval '${RM}r "$gentop"'
++      fi
++
++      exit $EXIT_SUCCESS
+       ;;
+-    esac
+ 
+-    # This variable tells wrapper scripts just to set variables rather
+-    # than running their programs.
+-    libtool_install_magic="$magic"
++    prog)
++      case $host in
++	*cygwin*) func_stripname '' '.exe' "$output"
++	          output=$func_stripname_result.exe;;
++      esac
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for programs"
+ 
+-    staticlibs=
+-    future_libdirs=
+-    current_libdirs=
+-    for file in $files; do
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for programs"
+ 
+-      # Do each installation.
+-      case $file in
+-      *.$libext)
+-	# Do the static libraries later.
+-	staticlibs="$staticlibs $file"
++      test "$preload" = yes \
++        && test "$dlopen_support" = unknown \
++	&& test "$dlopen_self" = unknown \
++	&& test "$dlopen_self_static" = unknown && \
++	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
++
++      case $host in
++      *-*-rhapsody* | *-*-darwin1.[012])
++	# On Rhapsody replace the C library is the System framework
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ 	;;
++      esac
+ 
+-      *.la)
+-	# Check to see that this really is a libtool archive.
+-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+-	else
+-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
++      case $host in
++      *-*-darwin*)
++	# Don't allow lazy linking, it breaks C++ global constructors
++	# But is supposedly fixed on 10.4 or later (yay!).
++	if test "$tagname" = CXX ; then
++	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
++	    10.[0123])
++	      func_append compile_command " ${wl}-bind_at_load"
++	      func_append finalize_command " ${wl}-bind_at_load"
++	    ;;
++	  esac
+ 	fi
++	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	;;
++      esac
+ 
+-	library_names=
+-	old_library=
+-	relink_command=
+-	# If there is no directory component, then add one.
+-	case $file in
+-	*/* | *\\*) . $file ;;
+-	*) . ./$file ;;
++
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $compile_deplibs " in
++	  *" -L$path/$objdir "*)
++	    func_append new_libs " -L$path/$objdir" ;;
++	  esac
++	  ;;
++	esac
++      done
++      for deplib in $compile_deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) func_append new_libs " $deplib" ;;
++	  esac
++	  ;;
++	*) func_append new_libs " $deplib" ;;
+ 	esac
++      done
++      compile_deplibs="$new_libs"
+ 
+-	# Add the libdir to current_libdirs if it is the destination.
+-	if test "X$destdir" = "X$libdir"; then
+-	  case "$current_libdirs " in
++
++      func_append compile_command " $compile_deplibs"
++      func_append finalize_command " $finalize_deplibs"
++
++      if test -n "$rpath$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	for libdir in $rpath $xrpath; do
++	  # This is the magic to use -rpath.
++	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) current_libdirs="$current_libdirs $libdir" ;;
++	  *) func_append finalize_rpath " $libdir" ;;
+ 	  esac
+-	else
+-	  # Note the libdir as a future libdir.
+-	  case "$future_libdirs " in
++	done
++      fi
++
++      # Now hardcode the library paths
++      rpath=
++      hardcode_libdirs=
++      for libdir in $compile_rpath $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		;;
++	      esac
++	    fi
++	  else
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    func_append rpath " $flag"
++	  fi
++	elif test -n "$runpath_var"; then
++	  case "$perm_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) future_libdirs="$future_libdirs $libdir" ;;
++	  *) func_append perm_rpath " $libdir" ;;
+ 	  esac
+ 	fi
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$libdir:"*) ;;
++	  ::) dllsearchpath=$libdir;;
++	  *) func_append dllsearchpath ":$libdir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  ::) dllsearchpath=$testbindir;;
++	  *) func_append dllsearchpath ":$testbindir";;
++	  esac
++	  ;;
++	esac
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      compile_rpath="$rpath"
+ 
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+-	test "X$dir" = "X$file/" && dir=
+-	dir="$dir$objdir"
+-
+-	if test -n "$relink_command"; then
+-	  # Determine the prefix the user has applied to our future dir.
+-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+-
+-	  # Don't allow the user to place us outside of our expected
+-	  # location b/c this prevents finding dependent libraries that
+-	  # are installed to the same prefix.
+-	  # At present, this check doesn't affect windows .dll's that
+-	  # are installed into $libdir/../bin (currently, that works fine)
+-	  # but it's something to keep an eye on.
+-	  if test "$inst_prefix_dir" = "$destdir"; then
+-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
+-
+-	  if test -n "$inst_prefix_dir"; then
+-	    # Stick the inst_prefix_dir data into the link command.
+-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+-	  else
+-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+-	  fi
+-
+-	  $echo "$modename: warning: relinking \`$file'" 1>&2
+-	  $show "$relink_command"
+-	  if $run eval "$relink_command"; then :
++      rpath=
++      hardcode_libdirs=
++      for libdir in $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		;;
++	      esac
++	    fi
+ 	  else
+-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+-	    exit $EXIT_FAILURE
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    func_append rpath " $flag"
+ 	  fi
++	elif test -n "$runpath_var"; then
++	  case "$finalize_perm_rpath " in
++	  *" $libdir "*) ;;
++	  *) func_append finalize_perm_rpath " $libdir" ;;
++	  esac
+ 	fi
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      finalize_rpath="$rpath"
+ 
+-	# See the names of the shared library.
+-	set dummy $library_names
+-	if test -n "$2"; then
+-	  realname="$2"
+-	  shift
+-	  shift
++      if test -n "$libobjs" && test "$build_old_libs" = yes; then
++	# Transform all the library objects into standard objects.
++	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++      fi
+ 
+-	  srcname="$realname"
+-	  test -n "$relink_command" && srcname="$realname"T
++      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ 
+-	  # Install the shared library and build the symlinks.
+-	  $show "$install_prog $dir/$srcname $destdir/$realname"
+-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+-	  if test -n "$stripme" && test -n "$striplib"; then
+-	    $show "$striplib $destdir/$realname"
+-	    $run eval "$striplib $destdir/$realname" || exit $?
+-	  fi
++      # template prelinking step
++      if test -n "$prelink_cmds"; then
++	func_execute_cmds "$prelink_cmds" 'exit $?'
++      fi
+ 
+-	  if test "$#" -gt 0; then
+-	    # Delete the old symlinks, and create new ones.
+-	    # Try `ln -sf' first, because the `ln' binary might depend on
+-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+-	    # so we also need to try rm && ln -s.
+-	    for linkname
+-	    do
+-	      if test "$linkname" != "$realname"; then
+-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+-	      fi
+-	    done
+-	  fi
++      wrappers_required=yes
++      case $host in
++      *cegcc* | *mingw32ce*)
++        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
++        wrappers_required=no
++        ;;
++      *cygwin* | *mingw* )
++        if test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      *)
++        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      esac
++      if test "$wrappers_required" = no; then
++	# Replace the output file specification.
++	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++	link_command="$compile_command$compile_rpath"
+ 
+-	  # Do each command in the postinstall commands.
+-	  lib="$destdir/$realname"
+-	  cmds=$postinstall_cmds
+-	  save_ifs="$IFS"; IFS='~'
+-	  for cmd in $cmds; do
+-	    IFS="$save_ifs"
+-	    eval cmd=\"$cmd\"
+-	    $show "$cmd"
+-	    $run eval "$cmd" || {
+-	      lt_exit=$?
+-
+-	      # Restore the uninstalled library and exit
+-	      if test "$mode" = relink; then
+-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+-	      fi
++	# We have no uninstalled library dependencies, so finalize right now.
++	exit_status=0
++	func_show_eval "$link_command" 'exit_status=$?'
+ 
+-	      exit $lt_exit
+-	    }
+-	  done
+-	  IFS="$save_ifs"
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
+ 	fi
+ 
+-	# Install the pseudo-library for information purposes.
+-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	instname="$dir/$name"i
+-	$show "$install_prog $instname $destdir/$name"
+-	$run eval "$install_prog $instname $destdir/$name" || exit $?
++	# Delete the generated files.
++	if test -f "$output_objdir/${outputname}S.${objext}"; then
++	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
++	fi
+ 
+-	# Maybe install the static library, too.
+-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+-	;;
++	exit $exit_status
++      fi
+ 
+-      *.lo)
+-	# Install (i.e. copy) a libtool object.
++      if test -n "$compile_shlibpath$finalize_shlibpath"; then
++	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++      fi
++      if test -n "$finalize_shlibpath"; then
++	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++      fi
+ 
+-	# Figure out destination file name, if it wasn't already specified.
+-	if test -n "$destname"; then
+-	  destfile="$destdir/$destname"
+-	else
+-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	  destfile="$destdir/$destfile"
++      compile_var=
++      finalize_var=
++      if test -n "$runpath_var"; then
++	if test -n "$perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $perm_rpath; do
++	    func_append rpath "$dir:"
++	  done
++	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
+-
+-	# Deduce the name of the destination old-style object file.
+-	case $destfile in
+-	*.lo)
+-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+-	  ;;
+-	*.$objext)
+-	  staticdest="$destfile"
+-	  destfile=
+-	  ;;
+-	*)
+-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
+-	  ;;
+-	esac
+-
+-	# Install the libtool object if requested.
+-	if test -n "$destfile"; then
+-	  $show "$install_prog $file $destfile"
+-	  $run eval "$install_prog $file $destfile" || exit $?
++	if test -n "$finalize_perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $finalize_perm_rpath; do
++	    func_append rpath "$dir:"
++	  done
++	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
++      fi
+ 
+-	# Install the old object if enabled.
+-	if test "$build_old_libs" = yes; then
+-	  # Deduce the name of the old-style object file.
+-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
++      if test "$no_install" = yes; then
++	# We don't need to create a wrapper script.
++	link_command="$compile_var$compile_command$compile_rpath"
++	# Replace the output file specification.
++	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++	# Delete the old output file.
++	$opt_dry_run || $RM $output
++	# Link the executable and exit
++	func_show_eval "$link_command" 'exit $?'
+ 
+-	  $show "$install_prog $staticobj $staticdest"
+-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
+ 	fi
++
+ 	exit $EXIT_SUCCESS
+-	;;
++      fi
+ 
+-      *)
+-	# Figure out destination file name, if it wasn't already specified.
+-	if test -n "$destname"; then
+-	  destfile="$destdir/$destname"
++      if test "$hardcode_action" = relink; then
++	# Fast installation is not supported
++	link_command="$compile_var$compile_command$compile_rpath"
++	relink_command="$finalize_var$finalize_command$finalize_rpath"
++
++	func_warning "this platform does not like uninstalled shared libraries"
++	func_warning "\`$output' will be relinked during installation"
++      else
++	if test "$fast_install" != no; then
++	  link_command="$finalize_var$compile_command$finalize_rpath"
++	  if test "$fast_install" = yes; then
++	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
++	  else
++	    # fast_install is set to needless
++	    relink_command=
++	  fi
+ 	else
+-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	  destfile="$destdir/$destfile"
++	  link_command="$compile_var$compile_command$compile_rpath"
++	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+ 	fi
++      fi
+ 
+-	# If the file is missing, and there is a .exe on the end, strip it
+-	# because it is most likely a libtool script we actually want to
+-	# install
+-	stripped_ext=""
+-	case $file in
+-	  *.exe)
+-	    if test ! -f "$file"; then
+-	      file=`$echo $file|${SED} 's,.exe$,,'`
+-	      stripped_ext=".exe"
+-	    fi
+-	    ;;
+-	esac
++      # Replace the output file specification.
++      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ 
+-	# Do a test to see if this is really a libtool program.
+-	case $host in
+-	*cygwin*|*mingw*)
+-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+-	    ;;
+-	*)
+-	    wrapper=$file
+-	    ;;
+-	esac
+-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+-	  notinst_deplibs=
+-	  relink_command=
++      # Delete the old output files.
++      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ 
+-	  # Note that it is not necessary on cygwin/mingw to append a dot to
+-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+-	  # `FILE.' does not work on cygwin managed mounts.
+-	  #
+-	  # If there is no directory component, then add one.
+-	  case $wrapper in
+-	  */* | *\\*) . ${wrapper} ;;
+-	  *) . ./${wrapper} ;;
+-	  esac
++      func_show_eval "$link_command" 'exit $?'
+ 
+-	  # Check the variables that should have been set.
+-	  if test -z "$notinst_deplibs"; then
+-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+-	    exit $EXIT_FAILURE
+-	  fi
++      if test -n "$postlink_cmds"; then
++	func_to_tool_file "$output_objdir/$outputname"
++	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	func_execute_cmds "$postlink_cmds" 'exit $?'
++      fi
+ 
+-	  finalize=yes
+-	  for lib in $notinst_deplibs; do
+-	    # Check to see that each library is installed.
+-	    libdir=
+-	    if test -f "$lib"; then
+-	      # If there is no directory component, then add one.
+-	      case $lib in
+-	      */* | *\\*) . $lib ;;
+-	      *) . ./$lib ;;
+-	      esac
+-	    fi
+-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+-	    if test -n "$libdir" && test ! -f "$libfile"; then
+-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+-	      finalize=no
+-	    fi
+-	  done
++      # Now create the wrapper script.
++      func_verbose "creating $output"
+ 
+-	  relink_command=
+-	  # Note that it is not necessary on cygwin/mingw to append a dot to
+-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+-	  # `FILE.' does not work on cygwin managed mounts.
+-	  #
+-	  # If there is no directory component, then add one.
+-	  case $wrapper in
+-	  */* | *\\*) . ${wrapper} ;;
+-	  *) . ./${wrapper} ;;
+-	  esac
++      # Quote the relink command for shipping.
++      if test -n "$relink_command"; then
++	# Preserve any variables that may affect compiler behavior
++	for var in $variables_saved_for_relink; do
++	  if eval test -z \"\${$var+set}\"; then
++	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++	  elif eval var_value=\$$var; test -z "$var_value"; then
++	    relink_command="$var=; export $var; $relink_command"
++	  else
++	    func_quote_for_eval "$var_value"
++	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
++	  fi
++	done
++	relink_command="(cd `pwd`; $relink_command)"
++	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++      fi
+ 
+-	  outputname=
+-	  if test "$fast_install" = no && test -n "$relink_command"; then
+-	    if test "$finalize" = yes && test -z "$run"; then
+-	      tmpdir=`func_mktempdir`
+-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+-	      outputname="$tmpdir/$file"
+-	      # Replace the output file specification.
+-	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
++      # Only actually do things if not in dry run mode.
++      $opt_dry_run || {
++	# win32 will think the script is a binary if it has
++	# a .exe suffix, so we strip it off here.
++	case $output in
++	  *.exe) func_stripname '' '.exe' "$output"
++	         output=$func_stripname_result ;;
++	esac
++	# test for cygwin because mv fails w/o .exe extensions
++	case $host in
++	  *cygwin*)
++	    exeext=.exe
++	    func_stripname '' '.exe' "$outputname"
++	    outputname=$func_stripname_result ;;
++	  *) exeext= ;;
++	esac
++	case $host in
++	  *cygwin* | *mingw* )
++	    func_dirname_and_basename "$output" "" "."
++	    output_name=$func_basename_result
++	    output_path=$func_dirname_result
++	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
++	    cwrapper="$output_path/$output_name.exe"
++	    $RM $cwrappersource $cwrapper
++	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
++
++	    func_emit_cwrapperexe_src > $cwrappersource
++
++	    # The wrapper executable is built using the $host compiler,
++	    # because it contains $host paths and files. If cross-
++	    # compiling, it, like the target executable, must be
++	    # executed on the $host or under an emulation environment.
++	    $opt_dry_run || {
++	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
++	      $STRIP $cwrapper
++	    }
+ 
+-	      $show "$relink_command"
+-	      if $run eval "$relink_command"; then :
++	    # Now, create the wrapper script for func_source use:
++	    func_ltwrapper_scriptname $cwrapper
++	    $RM $func_ltwrapper_scriptname_result
++	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
++	    $opt_dry_run || {
++	      # note: this script will not be executed, so do not chmod.
++	      if test "x$build" = "x$host" ; then
++		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ 	      else
+-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+-		${rm}r "$tmpdir"
+-		continue
++		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ 	      fi
+-	      file="$outputname"
+-	    else
+-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+-	    fi
+-	  else
+-	    # Install the binary that we compiled earlier.
+-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+-	  fi
+-	fi
++	    }
++	  ;;
++	  * )
++	    $RM $output
++	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+ 
+-	# remove .exe since cygwin /usr/bin/install will append another
+-	# one anyway 
+-	case $install_prog,$host in
+-	*/usr/bin/install*,*cygwin*)
+-	  case $file:$destfile in
+-	  *.exe:*.exe)
+-	    # this is ok
+-	    ;;
+-	  *.exe:*)
+-	    destfile=$destfile.exe
+-	    ;;
+-	  *:*.exe)
+-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+-	    ;;
+-	  esac
++	    func_emit_wrapper no > $output
++	    chmod +x $output
+ 	  ;;
+ 	esac
+-	$show "$install_prog$stripme $file $destfile"
+-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+-	test -n "$outputname" && ${rm}r "$tmpdir"
+-	;;
+-      esac
+-    done
+-
+-    for file in $staticlibs; do
+-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-
+-      # Set up the ranlib parameters.
+-      oldlib="$destdir/$name"
++      }
++      exit $EXIT_SUCCESS
++      ;;
++    esac
+ 
+-      $show "$install_prog $file $oldlib"
+-      $run eval "$install_prog \$file \$oldlib" || exit $?
++    # See if we need to build an old-fashioned archive.
++    for oldlib in $oldlibs; do
+ 
+-      if test -n "$stripme" && test -n "$old_striplib"; then
+-	$show "$old_striplib $oldlib"
+-	$run eval "$old_striplib $oldlib" || exit $?
++      if test "$build_libtool_libs" = convenience; then
++	oldobjs="$libobjs_save $symfileobj"
++	addlibs="$convenience"
++	build_libtool_libs=no
++      else
++	if test "$build_libtool_libs" = module; then
++	  oldobjs="$libobjs_save"
++	  build_libtool_libs=no
++	else
++	  oldobjs="$old_deplibs $non_pic_objects"
++	  if test "$preload" = yes && test -f "$symfileobj"; then
++	    func_append oldobjs " $symfileobj"
++	  fi
++	fi
++	addlibs="$old_convenience"
+       fi
+ 
+-      # Do each command in the postinstall commands.
+-      cmds=$old_postinstall_cmds
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-	IFS="$save_ifs"
+-	eval cmd=\"$cmd\"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
+-    done
++      if test -n "$addlibs"; then
++	gentop="$output_objdir/${outputname}x"
++	func_append generated " $gentop"
+ 
+-    if test -n "$future_libdirs"; then
+-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+-    fi
++	func_extract_archives $gentop $addlibs
++	func_append oldobjs " $func_extract_archives_result"
++      fi
+ 
+-    if test -n "$current_libdirs"; then
+-      # Maybe just do a dry run.
+-      test -n "$run" && current_libdirs=" -n$current_libdirs"
+-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+-    else
+-      exit $EXIT_SUCCESS
+-    fi
+-    ;;
++      # Do each command in the archive commands.
++      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
++	cmds=$old_archive_from_new_cmds
++      else
+ 
+-  # libtool finish mode
+-  finish)
+-    modename="$modename: finish"
+-    libdirs="$nonopt"
+-    admincmds=
++	# Add any objects from preloaded convenience libraries
++	if test -n "$dlprefiles"; then
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
+ 
+-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+-      for dir
+-      do
+-	libdirs="$libdirs $dir"
+-      done
++	  func_extract_archives $gentop $dlprefiles
++	  func_append oldobjs " $func_extract_archives_result"
++	fi
+ 
+-      for libdir in $libdirs; do
+-	if test -n "$finish_cmds"; then
+-	  # Do each command in the finish commands.
+-	  cmds=$finish_cmds
+-	  save_ifs="$IFS"; IFS='~'
+-	  for cmd in $cmds; do
+-	    IFS="$save_ifs"
+-	    eval cmd=\"$cmd\"
+-	    $show "$cmd"
+-	    $run eval "$cmd" || admincmds="$admincmds
+-       $cmd"
++	# POSIX demands no paths to be encoded in archives.  We have
++	# to avoid creating archives with duplicate basenames if we
++	# might have to extract them afterwards, e.g., when creating a
++	# static archive out of a convenience library, or when linking
++	# the entirety of a libtool archive into another (currently
++	# not supported by libtool).
++	if (for obj in $oldobjs
++	    do
++	      func_basename "$obj"
++	      $ECHO "$func_basename_result"
++	    done | sort | sort -uc >/dev/null 2>&1); then
++	  :
++	else
++	  echo "copying selected object files to avoid basename conflicts..."
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
++	  func_mkdir_p "$gentop"
++	  save_oldobjs=$oldobjs
++	  oldobjs=
++	  counter=1
++	  for obj in $save_oldobjs
++	  do
++	    func_basename "$obj"
++	    objbase="$func_basename_result"
++	    case " $oldobjs " in
++	    " ") oldobjs=$obj ;;
++	    *[\ /]"$objbase "*)
++	      while :; do
++		# Make sure we don't pick an alternate name that also
++		# overlaps.
++		newobj=lt$counter-$objbase
++		func_arith $counter + 1
++		counter=$func_arith_result
++		case " $oldobjs " in
++		*[\ /]"$newobj "*) ;;
++		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
++		esac
++	      done
++	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++	      func_append oldobjs " $gentop/$newobj"
++	      ;;
++	    *) func_append oldobjs " $obj" ;;
++	    esac
+ 	  done
+-	  IFS="$save_ifs"
+-	fi
+-	if test -n "$finish_eval"; then
+-	  # Do the single finish_eval.
+-	  eval cmds=\"$finish_eval\"
+-	  $run eval "$cmds" || admincmds="$admincmds
+-       $cmds"
+ 	fi
+-      done
+-    fi
+-
+-    # Exit here if they wanted silent mode.
+-    test "$show" = : && exit $EXIT_SUCCESS
++	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
++	tool_oldlib=$func_to_tool_file_result
++	eval cmds=\"$old_archive_cmds\"
+ 
+-    $echo "X----------------------------------------------------------------------" | $Xsed
+-    $echo "Libraries have been installed in:"
+-    for libdir in $libdirs; do
+-      $echo "   $libdir"
++	func_len " $cmds"
++	len=$func_len_result
++	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  cmds=$old_archive_cmds
++	elif test -n "$archiver_list_spec"; then
++	  func_verbose "using command file archive linking..."
++	  for obj in $oldobjs
++	  do
++	    func_to_tool_file "$obj"
++	    $ECHO "$func_to_tool_file_result"
++	  done > $output_objdir/$libname.libcmd
++	  func_to_tool_file "$output_objdir/$libname.libcmd"
++	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
++	  cmds=$old_archive_cmds
++	else
++	  # the command line is too long to link in one step, link in parts
++	  func_verbose "using piecewise archive linking..."
++	  save_RANLIB=$RANLIB
++	  RANLIB=:
++	  objlist=
++	  concat_cmds=
++	  save_oldobjs=$oldobjs
++	  oldobjs=
++	  # Is there a better way of finding the last object in the list?
++	  for obj in $save_oldobjs
++	  do
++	    last_oldobj=$obj
++	  done
++	  eval test_cmds=\"$old_archive_cmds\"
++	  func_len " $test_cmds"
++	  len0=$func_len_result
++	  len=$len0
++	  for obj in $save_oldobjs
++	  do
++	    func_len " $obj"
++	    func_arith $len + $func_len_result
++	    len=$func_arith_result
++	    func_append objlist " $obj"
++	    if test "$len" -lt "$max_cmd_len"; then
++	      :
++	    else
++	      # the above command should be used before it gets too long
++	      oldobjs=$objlist
++	      if test "$obj" = "$last_oldobj" ; then
++		RANLIB=$save_RANLIB
++	      fi
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
++	      objlist=
++	      len=$len0
++	    fi
++	  done
++	  RANLIB=$save_RANLIB
++	  oldobjs=$objlist
++	  if test "X$oldobjs" = "X" ; then
++	    eval cmds=\"\$concat_cmds\"
++	  else
++	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++	  fi
++	fi
++      fi
++      func_execute_cmds "$cmds" 'exit $?'
+     done
+-    $echo
+-    $echo "If you ever happen to want to link against installed libraries"
+-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+-    $echo "flag during linking and do at least one of the following:"
+-    if test -n "$shlibpath_var"; then
+-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+-      $echo "     during execution"
+-    fi
+-    if test -n "$runpath_var"; then
+-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+-      $echo "     during linking"
+-    fi
+-    if test -n "$hardcode_libdir_flag_spec"; then
+-      libdir=LIBDIR
+-      eval flag=\"$hardcode_libdir_flag_spec\"
+ 
+-      $echo "   - use the \`$flag' linker flag"
+-    fi
+-    if test -n "$admincmds"; then
+-      $echo "   - have your system administrator run these commands:$admincmds"
+-    fi
+-    if test -f /etc/ld.so.conf; then
+-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+-    fi
+-    $echo
+-    $echo "See any operating system documentation about shared libraries for"
+-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+-    $echo "X----------------------------------------------------------------------" | $Xsed
+-    exit $EXIT_SUCCESS
+-    ;;
+-
+-  # libtool execute mode
+-  execute)
+-    modename="$modename: execute"
+-
+-    # The first argument is the command name.
+-    cmd="$nonopt"
+-    if test -z "$cmd"; then
+-      $echo "$modename: you must specify a COMMAND" 1>&2
+-      $echo "$help"
+-      exit $EXIT_FAILURE
+-    fi
++    test -n "$generated" && \
++      func_show_eval "${RM}r$generated"
+ 
+-    # Handle -dlopen flags immediately.
+-    for file in $execute_dlfiles; do
+-      if test ! -f "$file"; then
+-	$echo "$modename: \`$file' is not a file" 1>&2
+-	$echo "$help" 1>&2
+-	exit $EXIT_FAILURE
+-      fi
++    # Now create the libtool archive.
++    case $output in
++    *.la)
++      old_library=
++      test "$build_old_libs" = yes && old_library="$libname.$libext"
++      func_verbose "creating $output"
+ 
+-      dir=
+-      case $file in
+-      *.la)
+-	# Check to see that this really is a libtool archive.
+-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++      # Preserve any variables that may affect compiler behavior
++      for var in $variables_saved_for_relink; do
++	if eval test -z \"\${$var+set}\"; then
++	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++	elif eval var_value=\$$var; test -z "$var_value"; then
++	  relink_command="$var=; export $var; $relink_command"
+ 	else
+-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit $EXIT_FAILURE
++	  func_quote_for_eval "$var_value"
++	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ 	fi
++      done
++      # Quote the link command for shipping.
++      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
++      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++      if test "$hardcode_automatic" = yes ; then
++	relink_command=
++      fi
+ 
+-	# Read the libtool library.
+-	dlname=
+-	library_names=
++      # Only create the output if not a dry run.
++      $opt_dry_run || {
++	for installed in no yes; do
++	  if test "$installed" = yes; then
++	    if test -z "$install_libdir"; then
++	      break
++	    fi
++	    output="$output_objdir/$outputname"i
++	    # Replace all uninstalled libtool libraries with the installed ones
++	    newdependency_libs=
++	    for deplib in $dependency_libs; do
++	      case $deplib in
++	      *.la)
++		func_basename "$deplib"
++		name="$func_basename_result"
++		func_resolve_sysroot "$deplib"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$deplib' is not a valid libtool archive"
++		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      -L*)
++		func_stripname -L '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -L$func_replace_sysroot_result"
++		;;
++	      -R*)
++		func_stripname -R '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -R$func_replace_sysroot_result"
++		;;
++	      *) func_append newdependency_libs " $deplib" ;;
++	      esac
++	    done
++	    dependency_libs="$newdependency_libs"
++	    newdlfiles=
+ 
+-	# If there is no directory component, then add one.
+-	case $file in
+-	*/* | *\\*) . $file ;;
+-	*) . ./$file ;;
+-	esac
++	    for lib in $dlfiles; do
++	      case $lib in
++	      *.la)
++	        func_basename "$lib"
++		name="$func_basename_result"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$lib' is not a valid libtool archive"
++		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      *) func_append newdlfiles " $lib" ;;
++	      esac
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      case $lib in
++	      *.la)
++		# Only pass preopened files to the pseudo-archive (for
++		# eventual linking with the app. that links it) if we
++		# didn't already link the preopened objects directly into
++		# the library:
++		func_basename "$lib"
++		name="$func_basename_result"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$lib' is not a valid libtool archive"
++		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      esac
++	    done
++	    dlprefiles="$newdlprefiles"
++	  else
++	    newdlfiles=
++	    for lib in $dlfiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      func_append newdlfiles " $abs"
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      func_append newdlprefiles " $abs"
++	    done
++	    dlprefiles="$newdlprefiles"
++	  fi
++	  $RM $output
++	  # place dlname in correct position for cygwin
++	  # In fact, it would be nice if we could use this code for all target
++	  # systems that can't hard-code library paths into their executables
++	  # and that have no shared library path variable independent of PATH,
++	  # but it turns out we can't easily determine that from inspecting
++	  # libtool variables, so we have to hard-code the OSs to which it
++	  # applies here; at the moment, that means platforms that use the PE
++	  # object format with DLL files.  See the long comment at the top of
++	  # tests/bindir.at for full details.
++	  tdlname=$dlname
++	  case $host,$output,$installed,$module,$dlname in
++	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
++	      # If a -bindir argument was supplied, place the dll there.
++	      if test "x$bindir" != x ;
++	      then
++		func_relative_path "$install_libdir" "$bindir"
++		tdlname=$func_relative_path_result$dlname
++	      else
++		# Otherwise fall back on heuristic.
++		tdlname=../bin/$dlname
++	      fi
++	      ;;
++	  esac
++	  $ECHO > $output "\
++# $outputname - a libtool library file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
+ 
+-	# Skip this library if it cannot be dlopened.
+-	if test -z "$dlname"; then
+-	  # Warn if it was a shared library.
+-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+-	  continue
+-	fi
++# The name that we can dlopen(3).
++dlname='$tdlname'
+ 
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$dir" = "X$file" && dir=.
++# Names of this library.
++library_names='$library_names'
+ 
+-	if test -f "$dir/$objdir/$dlname"; then
+-	  dir="$dir/$objdir"
+-	else
+-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+-	  exit $EXIT_FAILURE
+-	fi
+-	;;
++# The name of the static archive.
++old_library='$old_library'
+ 
+-      *.lo)
+-	# Just add the directory containing the .lo file.
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$dir" = "X$file" && dir=.
+-	;;
++# Linker flags that can not go in dependency_libs.
++inherited_linker_flags='$new_inherited_linker_flags'
+ 
+-      *)
+-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+-	continue
+-	;;
+-      esac
++# Libraries that this one depends upon.
++dependency_libs='$dependency_libs'
+ 
+-      # Get the absolute pathname.
+-      absdir=`cd "$dir" && pwd`
+-      test -n "$absdir" && dir="$absdir"
++# Names of additional weak libraries provided by this library
++weak_library_names='$weak_libs'
+ 
+-      # Now add the directory to shlibpath_var.
+-      if eval "test -z \"\$$shlibpath_var\""; then
+-	eval "$shlibpath_var=\"\$dir\""
+-      else
+-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+-      fi
+-    done
++# Version information for $libname.
++current=$current
++age=$age
++revision=$revision
+ 
+-    # This variable tells wrapper scripts just to set shlibpath_var
+-    # rather than running their programs.
+-    libtool_execute_magic="$magic"
++# Is this an already installed library?
++installed=$installed
+ 
+-    # Check if any of the arguments is a wrapper script.
+-    args=
+-    for file
+-    do
+-      case $file in
+-      -*) ;;
+-      *)
+-	# Do a test to see if this is really a libtool program.
+-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  # If there is no directory component, then add one.
+-	  case $file in
+-	  */* | *\\*) . $file ;;
+-	  *) . ./$file ;;
+-	  esac
++# Should we warn about portability when linking against -modules?
++shouldnotlink=$module
+ 
+-	  # Transform arg to wrapped name.
+-	  file="$progdir/$program"
+-	fi
+-	;;
+-      esac
+-      # Quote arguments (to preserve shell metacharacters).
+-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+-      args="$args \"$file\""
+-    done
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
+ 
+-    if test -z "$run"; then
+-      if test -n "$shlibpath_var"; then
+-	# Export the shlibpath_var.
+-	eval "export $shlibpath_var"
+-      fi
++# Directory that this library needs to be installed in:
++libdir='$install_libdir'"
++	  if test "$installed" = no && test "$need_relink" = yes; then
++	    $ECHO >> $output "\
++relink_command=\"$relink_command\""
++	  fi
++	done
++      }
+ 
+-      # Restore saved environment variables
+-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+-      do
+-       eval "if test \"\${save_$lt_var+set}\" = set; then
+-               $lt_var=\$save_$lt_var; export $lt_var
+-             else
+-               $lt_unset $lt_var
+-             fi"
+-      done
++      # Do a symbolic link so that the libtool archive can be found in
++      # LD_LIBRARY_PATH before the program is installed.
++      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
++      ;;
++    esac
++    exit $EXIT_SUCCESS
++}
+ 
++{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
++    func_mode_link ${1+"$@"}
+ 
+-      # Now prepare to actually exec the command.
+-      exec_cmd="\$cmd$args"
+-    else
+-      # Display what would be done.
+-      if test -n "$shlibpath_var"; then
+-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+-	$echo "export $shlibpath_var"
+-      fi
+-      $echo "$cmd$args"
+-      exit $EXIT_SUCCESS
+-    fi
+-    ;;
+ 
+-  # libtool clean and uninstall mode
+-  clean | uninstall)
+-    modename="$modename: $mode"
+-    rm="$nonopt"
++# func_mode_uninstall arg...
++func_mode_uninstall ()
++{
++    $opt_debug
++    RM="$nonopt"
+     files=
+     rmforce=
+     exit_status=0
+@@ -6494,44 +9460,41 @@
+     for arg
+     do
+       case $arg in
+-      -f) rm="$rm $arg"; rmforce=yes ;;
+-      -*) rm="$rm $arg" ;;
+-      *) files="$files $arg" ;;
++      -f) func_append RM " $arg"; rmforce=yes ;;
++      -*) func_append RM " $arg" ;;
++      *) func_append files " $arg" ;;
+       esac
+     done
+ 
+-    if test -z "$rm"; then
+-      $echo "$modename: you must specify an RM program" 1>&2
+-      $echo "$help" 1>&2
+-      exit $EXIT_FAILURE
+-    fi
++    test -z "$RM" && \
++      func_fatal_help "you must specify an RM program"
+ 
+     rmdirs=
+ 
+-    origobjdir="$objdir"
+     for file in $files; do
+-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-      if test "X$dir" = "X$file"; then
+-	dir=.
+-	objdir="$origobjdir"
++      func_dirname "$file" "" "."
++      dir="$func_dirname_result"
++      if test "X$dir" = X.; then
++	odir="$objdir"
+       else
+-	objdir="$dir/$origobjdir"
++	odir="$dir/$objdir"
+       fi
+-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-      test "$mode" = uninstall && objdir="$dir"
++      func_basename "$file"
++      name="$func_basename_result"
++      test "$opt_mode" = uninstall && odir="$dir"
+ 
+-      # Remember objdir for removal later, being careful to avoid duplicates
+-      if test "$mode" = clean; then
++      # Remember odir for removal later, being careful to avoid duplicates
++      if test "$opt_mode" = clean; then
+ 	case " $rmdirs " in
+-	  *" $objdir "*) ;;
+-	  *) rmdirs="$rmdirs $objdir" ;;
++	  *" $odir "*) ;;
++	  *) func_append rmdirs " $odir" ;;
+ 	esac
+       fi
+ 
+       # Don't error if the file doesn't exist and rm -f was used.
+-      if (test -L "$file") >/dev/null 2>&1 \
+-	|| (test -h "$file") >/dev/null 2>&1 \
+-	|| test -f "$file"; then
++      if { test -L "$file"; } >/dev/null 2>&1 ||
++	 { test -h "$file"; } >/dev/null 2>&1 ||
++	 test -f "$file"; then
+ 	:
+       elif test -d "$file"; then
+ 	exit_status=1
+@@ -6545,55 +9508,32 @@
+       case $name in
+       *.la)
+ 	# Possibly a libtool archive, so verify it.
+-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  . $dir/$name
++	if func_lalib_p "$file"; then
++	  func_source $dir/$name
+ 
+ 	  # Delete the libtool libraries and symlinks.
+ 	  for n in $library_names; do
+-	    rmfiles="$rmfiles $objdir/$n"
++	    func_append rmfiles " $odir/$n"
+ 	  done
+-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
++	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+ 
+-	  case "$mode" in
++	  case "$opt_mode" in
+ 	  clean)
+-	    case "  $library_names " in
+-	    # "  " in the beginning catches empty $dlname
++	    case " $library_names " in
+ 	    *" $dlname "*) ;;
+-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
++	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ 	    esac
+-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ 	    ;;
+ 	  uninstall)
+ 	    if test -n "$library_names"; then
+ 	      # Do each command in the postuninstall commands.
+-	      cmds=$postuninstall_cmds
+-	      save_ifs="$IFS"; IFS='~'
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		eval cmd=\"$cmd\"
+-		$show "$cmd"
+-		$run eval "$cmd"
+-		if test "$?" -ne 0 && test "$rmforce" != yes; then
+-		  exit_status=1
+-		fi
+-	      done
+-	      IFS="$save_ifs"
++	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ 	    fi
+ 
+ 	    if test -n "$old_library"; then
+ 	      # Do each command in the old_postuninstall commands.
+-	      cmds=$old_postuninstall_cmds
+-	      save_ifs="$IFS"; IFS='~'
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		eval cmd=\"$cmd\"
+-		$show "$cmd"
+-		$run eval "$cmd"
+-		if test "$?" -ne 0 && test "$rmforce" != yes; then
+-		  exit_status=1
+-		fi
+-	      done
+-	      IFS="$save_ifs"
++	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ 	    fi
+ 	    # FIXME: should reinstall the best remaining shared library.
+ 	    ;;
+@@ -6603,288 +9543,95 @@
+ 
+       *.lo)
+ 	# Possibly a libtool object, so verify it.
+-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++	if func_lalib_p "$file"; then
+ 
+ 	  # Read the .lo file
+-	  . $dir/$name
++	  func_source $dir/$name
+ 
+ 	  # Add PIC object to the list of files to remove.
+-	  if test -n "$pic_object" \
+-	     && test "$pic_object" != none; then
+-	    rmfiles="$rmfiles $dir/$pic_object"
++	  if test -n "$pic_object" &&
++	     test "$pic_object" != none; then
++	    func_append rmfiles " $dir/$pic_object"
+ 	  fi
+ 
+ 	  # Add non-PIC object to the list of files to remove.
+-	  if test -n "$non_pic_object" \
+-	     && test "$non_pic_object" != none; then
+-	    rmfiles="$rmfiles $dir/$non_pic_object"
++	  if test -n "$non_pic_object" &&
++	     test "$non_pic_object" != none; then
++	    func_append rmfiles " $dir/$non_pic_object"
+ 	  fi
+ 	fi
+ 	;;
+ 
+       *)
+-	if test "$mode" = clean ; then
++	if test "$opt_mode" = clean ; then
+ 	  noexename=$name
+ 	  case $file in
+ 	  *.exe)
+-	    file=`$echo $file|${SED} 's,.exe$,,'`
+-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
++	    func_stripname '' '.exe' "$file"
++	    file=$func_stripname_result
++	    func_stripname '' '.exe' "$name"
++	    noexename=$func_stripname_result
+ 	    # $file with .exe has already been added to rmfiles,
+ 	    # add $file without .exe
+-	    rmfiles="$rmfiles $file"
++	    func_append rmfiles " $file"
+ 	    ;;
+ 	  esac
+ 	  # Do a test to see if this is a libtool program.
+-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	    relink_command=
+-	    . $dir/$noexename
++	  if func_ltwrapper_p "$file"; then
++	    if func_ltwrapper_executable_p "$file"; then
++	      func_ltwrapper_scriptname "$file"
++	      relink_command=
++	      func_source $func_ltwrapper_scriptname_result
++	      func_append rmfiles " $func_ltwrapper_scriptname_result"
++	    else
++	      relink_command=
++	      func_source $dir/$noexename
++	    fi
+ 
+ 	    # note $name still contains .exe if it was in $file originally
+ 	    # as does the version of $file that was added into $rmfiles
+-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ 	    if test "$fast_install" = yes && test -n "$relink_command"; then
+-	      rmfiles="$rmfiles $objdir/lt-$name"
++	      func_append rmfiles " $odir/lt-$name"
+ 	    fi
+ 	    if test "X$noexename" != "X$name" ; then
+-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
++	      func_append rmfiles " $odir/lt-${noexename}.c"
+ 	    fi
+ 	  fi
+ 	fi
+ 	;;
+       esac
+-      $show "$rm $rmfiles"
+-      $run $rm $rmfiles || exit_status=1
++      func_show_eval "$RM $rmfiles" 'exit_status=1'
+     done
+-    objdir="$origobjdir"
+ 
+     # Try to remove the ${objdir}s in the directories where we deleted files
+     for dir in $rmdirs; do
+       if test -d "$dir"; then
+-	$show "rmdir $dir"
+-	$run rmdir $dir >/dev/null 2>&1
++	func_show_eval "rmdir $dir >/dev/null 2>&1"
+       fi
+     done
+ 
+     exit $exit_status
+-    ;;
++}
+ 
+-  "")
+-    $echo "$modename: you must specify a MODE" 1>&2
+-    $echo "$generic_help" 1>&2
+-    exit $EXIT_FAILURE
+-    ;;
+-  esac
++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
++    func_mode_uninstall ${1+"$@"}
+ 
+-  if test -z "$exec_cmd"; then
+-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+-    $echo "$generic_help" 1>&2
+-    exit $EXIT_FAILURE
+-  fi
+-fi # test -z "$show_help"
++test -z "$opt_mode" && {
++  help="$generic_help"
++  func_fatal_help "you must specify a MODE"
++}
++
++test -z "$exec_cmd" && \
++  func_fatal_help "invalid operation mode \`$opt_mode'"
+ 
+ if test -n "$exec_cmd"; then
+-  eval exec $exec_cmd
++  eval exec "$exec_cmd"
+   exit $EXIT_FAILURE
+ fi
+ 
+-# We need to display help for each of the modes.
+-case $mode in
+-"") $echo \
+-"Usage: $modename [OPTION]... [MODE-ARG]...
+-
+-Provide generalized library-building support services.
+-
+-    --config          show all configuration variables
+-    --debug           enable verbose shell tracing
+--n, --dry-run         display commands without modifying any files
+-    --features        display basic configuration information and exit
+-    --finish          same as \`--mode=finish'
+-    --help            display this help message and exit
+-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+-    --quiet           same as \`--silent'
+-    --silent          don't print informational messages
+-    --tag=TAG         use configuration variables from tag TAG
+-    --version         print version information
+-
+-MODE must be one of the following:
+-
+-      clean           remove files from the build directory
+-      compile         compile a source file into a libtool object
+-      execute         automatically set library path, then run a program
+-      finish          complete the installation of libtool libraries
+-      install         install libraries or executables
+-      link            create a library or an executable
+-      uninstall       remove libraries from an installed directory
+-
+-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+-a more detailed description of MODE.
+-
+-Report bugs to <bug-libtool@gnu.org>."
+-  exit $EXIT_SUCCESS
+-  ;;
+-
+-clean)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+-
+-Remove files from the build directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, object or program, all the files associated
+-with it are deleted. Otherwise, only FILE itself is deleted using RM."
+-  ;;
+-
+-compile)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+-
+-Compile a source file into a libtool library object.
+-
+-This mode accepts the following additional options:
+-
+-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+-  -prefer-pic       try to building PIC objects only
+-  -prefer-non-pic   try to building non-PIC objects only
+-  -static           always build a \`.o' file suitable for static linking
+-
+-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+-from the given SOURCEFILE.
+-
+-The output file name is determined by removing the directory component from
+-SOURCEFILE, then substituting the C source code suffix \`.c' with the
+-library object suffix, \`.lo'."
+-  ;;
+-
+-execute)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+-
+-Automatically set library path, then run a program.
+-
+-This mode accepts the following additional options:
+-
+-  -dlopen FILE      add the directory containing FILE to the library path
+-
+-This mode sets the library path environment variable according to \`-dlopen'
+-flags.
+-
+-If any of the ARGS are libtool executable wrappers, then they are translated
+-into their corresponding uninstalled binary, and any of their required library
+-directories are added to the library path.
+-
+-Then, COMMAND is executed, with ARGS as arguments."
+-  ;;
+-
+-finish)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+-
+-Complete the installation of libtool libraries.
+-
+-Each LIBDIR is a directory that contains libtool libraries.
+-
+-The commands that this mode executes may require superuser privileges.  Use
+-the \`--dry-run' option if you just want to see what would be executed."
+-  ;;
+-
+-install)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+-
+-Install executables or libraries.
+-
+-INSTALL-COMMAND is the installation command.  The first component should be
+-either the \`install' or \`cp' program.
+-
+-The rest of the components are interpreted as arguments to that command (only
+-BSD-compatible install options are recognized)."
+-  ;;
+-
+-link)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+-
+-Link object files or libraries together to form another library, or to
+-create an executable program.
+-
+-LINK-COMMAND is a command using the C compiler that you would use to create
+-a program from several object files.
+-
+-The following components of LINK-COMMAND are treated specially:
+-
+-  -all-static       do not do any dynamic linking at all
+-  -avoid-version    do not add a version suffix if possible
+-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+-  -export-symbols SYMFILE
+-                    try to export only the symbols listed in SYMFILE
+-  -export-symbols-regex REGEX
+-                    try to export only the symbols matching REGEX
+-  -LLIBDIR          search LIBDIR for required installed libraries
+-  -lNAME            OUTPUT-FILE requires the installed library libNAME
+-  -module           build a library that can dlopened
+-  -no-fast-install  disable the fast-install mode
+-  -no-install       link a not-installable executable
+-  -no-undefined     declare that a library does not refer to external symbols
+-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+-  -objectlist FILE  Use a list of object files found in FILE to specify objects
+-  -precious-files-regex REGEX
+-                    don't remove output files matching REGEX
+-  -release RELEASE  specify package release information
+-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+-  -static           do not do any dynamic linking of uninstalled libtool libraries
+-  -static-libtool-libs
+-                    do not do any dynamic linking of libtool libraries
+-  -version-info CURRENT[:REVISION[:AGE]]
+-                    specify library version info [each variable defaults to 0]
+-
+-All other options (arguments beginning with \`-') are ignored.
+-
+-Every other argument is treated as a filename.  Files ending in \`.la' are
+-treated as uninstalled libtool libraries, other files are standard or library
+-object files.
+-
+-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+-required, except when creating a convenience library.
+-
+-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+-using \`ar' and \`ranlib', or on Windows using \`lib'.
+-
+-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+-is created, otherwise an executable program is created."
+-  ;;
+-
+-uninstall)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++exit $exit_status
+ 
+-Remove libraries from an installation directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, all the files associated with it are deleted.
+-Otherwise, only FILE itself is deleted using RM."
+-  ;;
+-
+-*)
+-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+-  $echo "$help" 1>&2
+-  exit $EXIT_FAILURE
+-  ;;
+-esac
+-
+-$echo
+-$echo "Try \`$modename --help' for more information about other modes."
+-
+-exit $?
+ 
+ # The TAGs below are defined such that we never get into a situation
+ # in which we disable both kinds of libraries.  Given conflicting
+@@ -6898,14 +9645,17 @@
+ # configuration.  But we'll never go from static-only to shared-only.
+ 
+ # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+-disable_libs=shared
++build_libtool_libs=no
++build_old_libs=yes
+ # ### END LIBTOOL TAG CONFIG: disable-shared
+ 
+ # ### BEGIN LIBTOOL TAG CONFIG: disable-static
+-disable_libs=static
++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+ # ### END LIBTOOL TAG CONFIG: disable-static
+ 
+ # Local Variables:
+ # mode:shell-script
+ # sh-indentation:2
+ # End:
++# vi:sw=2
++
+diff -uNr a/configure.ac b/configure.ac
+--- a/configure.ac	2007-01-19 16:47:11.000000000 -0500
++++ b/configure.ac	2012-12-11 15:24:37.692590376 -0500
+@@ -67,6 +67,7 @@
+ dnl Note: Avoid the temptation to call the auxiliary directory "aux" because
+ dnl Microsoft Windows will barf if you try to use "aux" as a directory name. :-(
+ AC_CONFIG_AUX_DIR(acaux)
++AC_CONFIG_MACRO_DIR([m4])
+ 
+ # Detect the canonical host and target build environment.
+ # Note: This precedes automake initialization to avoid warnings.
+@@ -147,13 +148,11 @@
+ 
+ AC_PROG_CC
+ AC_PROG_INSTALL
+-AC_PROG_RANLIB
+ # AC_PROG_AWK
+ # AC_PROG_CPP
+ # AC_PROG_LN_S
+ 
+-AM_DISABLE_SHARED
+-AC_PROG_LIBTOOL
++LT_INIT([win32-dll])
+ 
+ AC_PATH_XTRA
+ 
+diff -uNr a/m4/libtool.m4 b/m4/libtool.m4
+--- a/m4/libtool.m4	1969-12-31 19:00:00.000000000 -0500
++++ b/m4/libtool.m4	2012-06-11 18:20:43.000000000 -0400
+@@ -0,0 +1,7983 @@
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++#
++#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++#                 Foundation, Inc.
++#   Written by Gordon Matzigkeit, 1996
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++m4_define([_LT_COPYING], [dnl
++#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++#                 Foundation, Inc.
++#   Written by Gordon Matzigkeit, 1996
++#
++#   This file is part of GNU Libtool.
++#
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING.  If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++])
++
++# serial 57 LT_INIT
++
++
++# LT_PREREQ(VERSION)
++# ------------------
++# Complain and exit if this libtool version is less that VERSION.
++m4_defun([LT_PREREQ],
++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
++       [m4_default([$3],
++		   [m4_fatal([Libtool version $1 or higher is required],
++		             63)])],
++       [$2])])
++
++
++# _LT_CHECK_BUILDDIR
++# ------------------
++# Complain if the absolute build directory name contains unusual characters
++m4_defun([_LT_CHECK_BUILDDIR],
++[case `pwd` in
++  *\ * | *\	*)
++    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
++esac
++])
++
++
++# LT_INIT([OPTIONS])
++# ------------------
++AC_DEFUN([LT_INIT],
++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
++AC_BEFORE([$0], [LT_LANG])dnl
++AC_BEFORE([$0], [LT_OUTPUT])dnl
++AC_BEFORE([$0], [LTDL_INIT])dnl
++m4_require([_LT_CHECK_BUILDDIR])dnl
++
++dnl Autoconf doesn't catch unexpanded LT_ macros by default:
++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
++dnl unless we require an AC_DEFUNed macro:
++AC_REQUIRE([LTOPTIONS_VERSION])dnl
++AC_REQUIRE([LTSUGAR_VERSION])dnl
++AC_REQUIRE([LTVERSION_VERSION])dnl
++AC_REQUIRE([LTOBSOLETE_VERSION])dnl
++m4_require([_LT_PROG_LTMAIN])dnl
++
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
++dnl Parse OPTIONS
++_LT_SET_OPTIONS([$0], [$1])
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++_LT_SETUP
++
++# Only expand once:
++m4_define([LT_INIT])
++])# LT_INIT
++
++# Old names:
++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
++dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
++m4_defun([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++  case $cc_temp in
++    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
++])
++
++
++# _LT_FILEUTILS_DEFAULTS
++# ----------------------
++# It is okay to use these file commands and assume they have been set
++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
++m4_defun([_LT_FILEUTILS_DEFAULTS],
++[: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++])# _LT_FILEUTILS_DEFAULTS
++
++
++# _LT_SETUP
++# ---------
++m4_defun([_LT_SETUP],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
++_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
++dnl
++_LT_DECL([], [host_alias], [0], [The host system])dnl
++_LT_DECL([], [host], [0])dnl
++_LT_DECL([], [host_os], [0])dnl
++dnl
++_LT_DECL([], [build_alias], [0], [The build system])dnl
++_LT_DECL([], [build], [0])dnl
++_LT_DECL([], [build_os], [0])dnl
++dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++dnl
++AC_REQUIRE([AC_PROG_LN_S])dnl
++test -z "$LN_S" && LN_S="ln -s"
++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
++dnl
++AC_REQUIRE([LT_CMD_MAX_LEN])dnl
++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
++dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
++m4_require([_LT_CMD_RELOAD])dnl
++m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
++m4_require([_LT_CMD_OLD_ARCHIVE])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
++
++_LT_CONFIG_LIBTOOL_INIT([
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++   setopt NO_GLOB_SUBST
++fi
++])
++if test -n "${ZSH_VERSION+set}" ; then
++   setopt NO_GLOB_SUBST
++fi
++
++_LT_CHECK_OBJDIR
++
++m4_require([_LT_TAG_COMPILER])dnl
++
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
++
++# Global variables:
++ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    _LT_PATH_MAGIC
++  fi
++  ;;
++esac
++
++# Use C for the default configuration in the libtool script
++LT_SUPPORTED_TAG([CC])
++_LT_LANG_C_CONFIG
++_LT_LANG_DEFAULT_CONFIG
++_LT_CONFIG_COMMANDS
++])# _LT_SETUP
++
++
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
++# _LT_PROG_LTMAIN
++# ---------------
++# Note that this code is called both from `configure', and `config.status'
++# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
++# `config.status' has no value for ac_aux_dir unless we are using Automake,
++# so we pass a copy along to make sure it has a sensible value anyway.
++m4_defun([_LT_PROG_LTMAIN],
++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
++ltmain="$ac_aux_dir/ltmain.sh"
++])# _LT_PROG_LTMAIN
++
++
++## ------------------------------------- ##
++## Accumulate code for creating libtool. ##
++## ------------------------------------- ##
++
++# So that we can recreate a full libtool script including additional
++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
++# in macros and then make a single call at the end using the `libtool'
++# label.
++
++
++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
++# ----------------------------------------
++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL_INIT],
++[m4_ifval([$1],
++          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
++                     [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_INIT])
++
++
++# _LT_CONFIG_LIBTOOL([COMMANDS])
++# ------------------------------
++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL],
++[m4_ifval([$1],
++          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
++                     [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
++
++
++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
++# -----------------------------------------------------
++m4_defun([_LT_CONFIG_SAVE_COMMANDS],
++[_LT_CONFIG_LIBTOOL([$1])
++_LT_CONFIG_LIBTOOL_INIT([$2])
++])
++
++
++# _LT_FORMAT_COMMENT([COMMENT])
++# -----------------------------
++# Add leading comment marks to the start of each line, and a trailing
++# full-stop to the whole comment if one is not present already.
++m4_define([_LT_FORMAT_COMMENT],
++[m4_ifval([$1], [
++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
++              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
++)])
++
++
++
++## ------------------------ ##
++## FIXME: Eliminate VARNAME ##
++## ------------------------ ##
++
++
++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
++# -------------------------------------------------------------------
++# CONFIGNAME is the name given to the value in the libtool script.
++# VARNAME is the (base) name used in the configure script.
++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
++# VARNAME.  Any other value will be used directly.
++m4_define([_LT_DECL],
++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
++    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
++	[m4_ifval([$1], [$1], [$2])])
++    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
++    m4_ifval([$4],
++	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
++    lt_dict_add_subkey([lt_decl_dict], [$2],
++	[tagged?], [m4_ifval([$5], [yes], [no])])])
++])
++
++
++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
++# --------------------------------------------------------
++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
++
++
++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_tag_varnames],
++[_lt_decl_filter([tagged?], [yes], $@)])
++
++
++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
++# ---------------------------------------------------------
++m4_define([_lt_decl_filter],
++[m4_case([$#],
++  [0], [m4_fatal([$0: too few arguments: $#])],
++  [1], [m4_fatal([$0: too few arguments: $#: $1])],
++  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
++  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
++  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
++])
++
++
++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
++# --------------------------------------------------
++m4_define([lt_decl_quote_varnames],
++[_lt_decl_filter([value], [1], $@)])
++
++
++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_dquote_varnames],
++[_lt_decl_filter([value], [2], $@)])
++
++
++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_varnames_tagged],
++[m4_assert([$# <= 2])dnl
++_$0(m4_quote(m4_default([$1], [[, ]])),
++    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
++    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
++m4_define([_lt_decl_varnames_tagged],
++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
++
++
++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_all_varnames],
++[_$0(m4_quote(m4_default([$1], [[, ]])),
++     m4_if([$2], [],
++	   m4_quote(lt_decl_varnames),
++	m4_quote(m4_shift($@))))[]dnl
++])
++m4_define([_lt_decl_all_varnames],
++[lt_join($@, lt_decl_varnames_tagged([$1],
++			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
++])
++
++
++# _LT_CONFIG_STATUS_DECLARE([VARNAME])
++# ------------------------------------
++# Quote a variable value, and forward it to `config.status' so that its
++# declaration there will have the same value as in `configure'.  VARNAME
++# must have a single quote delimited value for this to work.
++m4_define([_LT_CONFIG_STATUS_DECLARE],
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
++
++
++# _LT_CONFIG_STATUS_DECLARATIONS
++# ------------------------------
++# We delimit libtool config variables with single quotes, so when
++# we write them to config.status, we have to be sure to quote all
++# embedded single quotes properly.  In configure, this macro expands
++# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
++#
++#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
++    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAGS
++# ----------------
++# Output comment and list of tags supported by the script
++m4_defun([_LT_LIBTOOL_TAGS],
++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
++available_tags="_LT_TAGS"dnl
++])
++
++
++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
++# -----------------------------------
++# Extract the dictionary values for VARNAME (optionally with TAG) and
++# expand to a commented shell variable setting:
++#
++#    # Some comment about what VAR is for.
++#    visible_name=$lt_internal_name
++m4_define([_LT_LIBTOOL_DECLARE],
++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
++					   [description])))[]dnl
++m4_pushdef([_libtool_name],
++    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
++    [0], [_libtool_name=[$]$1],
++    [1], [_libtool_name=$lt_[]$1],
++    [2], [_libtool_name=$lt_[]$1],
++    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
++])
++
++
++# _LT_LIBTOOL_CONFIG_VARS
++# -----------------------
++# Produce commented declarations of non-tagged libtool config variables
++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
++# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
++# section) are produced by _LT_LIBTOOL_TAG_VARS.
++m4_defun([_LT_LIBTOOL_CONFIG_VARS],
++[m4_foreach([_lt_var],
++    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
++    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAG_VARS(TAG)
++# -------------------------
++m4_define([_LT_LIBTOOL_TAG_VARS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
++    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
++
++
++# _LT_TAGVAR(VARNAME, [TAGNAME])
++# ------------------------------
++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
++
++
++# _LT_CONFIG_COMMANDS
++# -------------------
++# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
++# variables for single and double quote escaping we saved from calls
++# to _LT_DECL, we can put quote escaped variables declarations
++# into `config.status', and then the shell code to quote escape them in
++# for loops in `config.status'.  Finally, any additional code accumulated
++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
++m4_defun([_LT_CONFIG_COMMANDS],
++[AC_PROVIDE_IFELSE([LT_OUTPUT],
++	dnl If the libtool generation code has been placed in $CONFIG_LT,
++	dnl instead of duplicating it all over again into config.status,
++	dnl then we will have config.status run $CONFIG_LT later, so it
++	dnl needs to know what name is stored there:
++        [AC_CONFIG_COMMANDS([libtool],
++            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
++    dnl If the libtool generation code is destined for config.status,
++    dnl expand the accumulated commands and init code now:
++    [AC_CONFIG_COMMANDS([libtool],
++        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
++])#_LT_CONFIG_COMMANDS
++
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
++[
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++_LT_CONFIG_STATUS_DECLARATIONS
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
++# Quote evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_quote_varnames); do
++    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++    *[[\\\\\\\`\\"\\\$]]*)
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++      ;;
++    *)
++      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++      ;;
++    esac
++done
++
++# Double-quote double-evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_dquote_varnames); do
++    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++    *[[\\\\\\\`\\"\\\$]]*)
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++      ;;
++    *)
++      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++      ;;
++    esac
++done
++
++_LT_OUTPUT_LIBTOOL_INIT
++])
++
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable.  If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins.  After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script.  The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
++
++# LT_OUTPUT
++# ---------
++# This macro allows early generation of the libtool script (before
++# AC_OUTPUT is called), incase it is used in configure for compilation
++# tests.
++AC_DEFUN([LT_OUTPUT],
++[: ${CONFIG_LT=./config.lt}
++AC_MSG_NOTICE([creating $CONFIG_LT])
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++lt_cl_silent=false
++exec AS_MESSAGE_LOG_FD>>config.log
++{
++  echo
++  AS_BOX([Running $as_me.])
++} >&AS_MESSAGE_LOG_FD
++
++lt_cl_help="\
++\`$as_me' creates a local libtool stub from the current configuration,
++for use in further configure time tests before the real libtool is
++generated.
++
++Usage: $[0] [[OPTIONS]]
++
++  -h, --help      print this help, then exit
++  -V, --version   print version number, then exit
++  -q, --quiet     do not print progress messages
++  -d, --debug     don't remove temporary files
++
++Report bugs to <bug-libtool@gnu.org>."
++
++lt_cl_version="\
++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
++configured by $[0], generated by m4_PACKAGE_STRING.
++
++Copyright (C) 2011 Free Software Foundation, Inc.
++This config.lt script is free software; the Free Software Foundation
++gives unlimited permision to copy, distribute and modify it."
++
++while test $[#] != 0
++do
++  case $[1] in
++    --version | --v* | -V )
++      echo "$lt_cl_version"; exit 0 ;;
++    --help | --h* | -h )
++      echo "$lt_cl_help"; exit 0 ;;
++    --debug | --d* | -d )
++      debug=: ;;
++    --quiet | --q* | --silent | --s* | -q )
++      lt_cl_silent=: ;;
++
++    -*) AC_MSG_ERROR([unrecognized option: $[1]
++Try \`$[0] --help' for more information.]) ;;
++
++    *) AC_MSG_ERROR([unrecognized argument: $[1]
++Try \`$[0] --help' for more information.]) ;;
++  esac
++  shift
++done
++
++if $lt_cl_silent; then
++  exec AS_MESSAGE_FD>/dev/null
++fi
++_LTEOF
++
++cat >>"$CONFIG_LT" <<_LTEOF
++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AC_MSG_NOTICE([creating $ofile])
++_LT_OUTPUT_LIBTOOL_COMMANDS
++AS_EXIT(0)
++_LTEOF
++chmod +x "$CONFIG_LT"
++
++# configure is writing to config.log, but config.lt does its own redirection,
++# appending to config.log, which fails on DOS, as config.log is still kept
++# open by configure.  Here we exec the FD to /dev/null, effectively closing
++# config.log, so it can be properly (re)opened and appended to by config.lt.
++lt_cl_success=:
++test "$silent" = yes &&
++  lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
++])# LT_OUTPUT
++
++
++# _LT_CONFIG(TAG)
++# ---------------
++# If TAG is the built-in tag, create an initial libtool script with a
++# default configuration from the untagged config vars.  Otherwise add code
++# to config.status for appending the configuration named by TAG from the
++# matching tagged config vars.
++m4_defun([_LT_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_CONFIG_SAVE_COMMANDS([
++  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
++  m4_if(_LT_TAG, [C], [
++    # See if we are running on zsh, and set the options which allow our
++    # commands through without removal of \ escapes.
++    if test -n "${ZSH_VERSION+set}" ; then
++      setopt NO_GLOB_SUBST
++    fi
++
++    cfgfile="${ofile}T"
++    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++    $RM "$cfgfile"
++
++    cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
++
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++_LT_COPYING
++_LT_LIBTOOL_TAGS
++
++# ### BEGIN LIBTOOL CONFIG
++_LT_LIBTOOL_CONFIG_VARS
++_LT_LIBTOOL_TAG_VARS
++# ### END LIBTOOL CONFIG
++
++_LT_EOF
++
++  case $host_os in
++  aix3*)
++    cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program.  For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++  COLLECT_NAMES=
++  export COLLECT_NAMES
++fi
++_LT_EOF
++    ;;
++  esac
++
++  _LT_PROG_LTMAIN
++
++  # We use sed instead of cat because bash on DJGPP gets confused if
++  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
++  # text mode, it properly converts lines to CR/LF.  This bash problem
++  # is reportedly fixed, but why not run on old versions too?
++  sed '$q' "$ltmain" >> "$cfgfile" \
++     || (rm -f "$cfgfile"; exit 1)
++
++  _LT_PROG_REPLACE_SHELLFNS
++
++   mv -f "$cfgfile" "$ofile" ||
++    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++  chmod +x "$ofile"
++],
++[cat <<_LT_EOF >> "$ofile"
++
++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
++dnl in a comment (ie after a #).
++# ### BEGIN LIBTOOL TAG CONFIG: $1
++_LT_LIBTOOL_TAG_VARS(_LT_TAG)
++# ### END LIBTOOL TAG CONFIG: $1
++_LT_EOF
++])dnl /m4_if
++],
++[m4_if([$1], [], [
++    PACKAGE='$PACKAGE'
++    VERSION='$VERSION'
++    TIMESTAMP='$TIMESTAMP'
++    RM='$RM'
++    ofile='$ofile'], [])
++])dnl /_LT_CONFIG_SAVE_COMMANDS
++])# _LT_CONFIG
++
++
++# LT_SUPPORTED_TAG(TAG)
++# ---------------------
++# Trace this macro to discover what tags are supported by the libtool
++# --tag option, using:
++#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
++AC_DEFUN([LT_SUPPORTED_TAG], [])
++
++
++# C support is built-in for now
++m4_define([_LT_LANG_C_enabled], [])
++m4_define([_LT_TAGS], [])
++
++
++# LT_LANG(LANG)
++# -------------
++# Enable libtool support for the given language if not already enabled.
++AC_DEFUN([LT_LANG],
++[AC_BEFORE([$0], [LT_OUTPUT])dnl
++m4_case([$1],
++  [C],			[_LT_LANG(C)],
++  [C++],		[_LT_LANG(CXX)],
++  [Go],			[_LT_LANG(GO)],
++  [Java],		[_LT_LANG(GCJ)],
++  [Fortran 77],		[_LT_LANG(F77)],
++  [Fortran],		[_LT_LANG(FC)],
++  [Windows Resource],	[_LT_LANG(RC)],
++  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
++    [_LT_LANG($1)],
++    [m4_fatal([$0: unsupported language: "$1"])])])dnl
++])# LT_LANG
++
++
++# _LT_LANG(LANGNAME)
++# ------------------
++m4_defun([_LT_LANG],
++[m4_ifdef([_LT_LANG_]$1[_enabled], [],
++  [LT_SUPPORTED_TAG([$1])dnl
++  m4_append([_LT_TAGS], [$1 ])dnl
++  m4_define([_LT_LANG_]$1[_enabled], [])dnl
++  _LT_LANG_$1_CONFIG($1)])dnl
++])# _LT_LANG
++
++
++m4_ifndef([AC_PROG_GO], [
++############################################################
++# NOTE: This macro has been submitted for inclusion into   #
++#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
++#  a released version of Autoconf we should remove this    #
++#  macro and use it instead.                               #
++############################################################
++m4_defun([AC_PROG_GO],
++[AC_LANG_PUSH(Go)dnl
++AC_ARG_VAR([GOC],     [Go compiler command])dnl
++AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
++_AC_ARG_VAR_LDFLAGS()dnl
++AC_CHECK_TOOL(GOC, gccgo)
++if test -z "$GOC"; then
++  if test -n "$ac_tool_prefix"; then
++    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
++  fi
++fi
++if test -z "$GOC"; then
++  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
++fi
++])#m4_defun
++])#m4_ifndef
++
++
++# _LT_LANG_DEFAULT_CONFIG
++# -----------------------
++m4_defun([_LT_LANG_DEFAULT_CONFIG],
++[AC_PROVIDE_IFELSE([AC_PROG_CXX],
++  [LT_LANG(CXX)],
++  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_F77],
++  [LT_LANG(F77)],
++  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_FC],
++  [LT_LANG(FC)],
++  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
++
++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
++dnl pulling things in needlessly.
++AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++  [LT_LANG(GCJ)],
++  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++    [LT_LANG(GCJ)],
++    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
++      [LT_LANG(GCJ)],
++      [m4_ifdef([AC_PROG_GCJ],
++	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
++       m4_ifdef([A][M_PROG_GCJ],
++	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
++       m4_ifdef([LT_PROG_GCJ],
++	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
++
++AC_PROVIDE_IFELSE([AC_PROG_GO],
++  [LT_LANG(GO)],
++  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
++
++AC_PROVIDE_IFELSE([LT_PROG_RC],
++  [LT_LANG(RC)],
++  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
++])# _LT_LANG_DEFAULT_CONFIG
++
++# Obsolete macros:
++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
++dnl AC_DEFUN([AC_LIBTOOL_F77], [])
++dnl AC_DEFUN([AC_LIBTOOL_FC], [])
++dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
++
++
++# _LT_TAG_COMPILER
++# ----------------
++m4_defun([_LT_TAG_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_TAG_COMPILER
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++m4_defun([_LT_COMPILER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++m4_defun([_LT_LINKER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++])# _LT_LINKER_BOILERPLATE
++
++# _LT_REQUIRED_DARWIN_CHECKS
++# -------------------------
++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
++  case $host_os in
++    rhapsody* | darwin*)
++    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++    AC_CHECK_TOOL([LIPO], [lipo], [:])
++    AC_CHECK_TOOL([OTOOL], [otool], [:])
++    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
++    _LT_DECL([], [DSYMUTIL], [1],
++      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
++    _LT_DECL([], [NMEDIT], [1],
++      [Tool to change global to local symbols on Mac OS X])
++    _LT_DECL([], [LIPO], [1],
++      [Tool to manipulate fat objects and archives on Mac OS X])
++    _LT_DECL([], [OTOOL], [1],
++      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
++    _LT_DECL([], [OTOOL64], [1],
++      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
++
++    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++      [lt_cv_apple_cc_single_mod=no
++      if test -z "${LT_MULTI_MODULE}"; then
++	# By default we will add the -single_module flag. You can override
++	# by either setting the environment variable LT_MULTI_MODULE
++	# non-empty at configure time, or by adding -multi_module to the
++	# link flags.
++	rm -rf libconftest.dylib*
++	echo "int foo(void){return 1;}" > conftest.c
++	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
++	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++        _lt_result=$?
++	# If there is a non-empty error log, and "single_module"
++	# appears in it, assume the flag caused a linker warning
++        if test -s conftest.err && $GREP single_module conftest.err; then
++	  cat conftest.err >&AS_MESSAGE_LOG_FD
++	# Otherwise, if the output was created with a 0 exit code from
++	# the compiler, it worked.
++	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
++	  lt_cv_apple_cc_single_mod=yes
++	else
++	  cat conftest.err >&AS_MESSAGE_LOG_FD
++	fi
++	rm -rf libconftest.dylib*
++	rm -f conftest.*
++      fi])
++
++    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++      [lt_cv_ld_exported_symbols_list],
++      [lt_cv_ld_exported_symbols_list=no
++      save_LDFLAGS=$LDFLAGS
++      echo "_main" > conftest.sym
++      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++	[lt_cv_ld_exported_symbols_list=yes],
++	[lt_cv_ld_exported_symbols_list=no])
++	LDFLAGS="$save_LDFLAGS"
++    ])
++
++    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++      [lt_cv_ld_force_load=no
++      cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++      cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++      _lt_result=$?
++      if test -s conftest.err && $GREP force_load conftest.err; then
++	cat conftest.err >&AS_MESSAGE_LOG_FD
++      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
++	lt_cv_ld_force_load=yes
++      else
++	cat conftest.err >&AS_MESSAGE_LOG_FD
++      fi
++        rm -f conftest.err libconftest.a conftest conftest.c
++        rm -rf conftest.dSYM
++    ])
++    case $host_os in
++    rhapsody* | darwin1.[[012]])
++      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++    darwin1.*)
++      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++    darwin*) # darwin 5.x on
++      # if running on 10.5 or later, the deployment target defaults
++      # to the OS version, if on x86, and 10.4, the deployment
++      # target defaults to 10.4. Don't you love it?
++      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++	10.[[012]]*)
++	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++	10.*)
++	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++      esac
++    ;;
++  esac
++    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++      _lt_dar_single_mod='$single_module'
++    fi
++    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++    else
++      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    fi
++    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
++      _lt_dsymutil='~$DSYMUTIL $lib || :'
++    else
++      _lt_dsymutil=
++    fi
++    ;;
++  esac
++])
++
++
++# _LT_DARWIN_LINKER_FEATURES([TAG])
++# ---------------------------------
++# Checks for linker and compiler features on darwin
++m4_defun([_LT_DARWIN_LINKER_FEATURES],
++[
++  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
++  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++  _LT_TAGVAR(hardcode_direct, $1)=no
++  _LT_TAGVAR(hardcode_automatic, $1)=yes
++  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++  if test "$lt_cv_ld_force_load" = "yes"; then
++    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
++                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
++  else
++    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++  fi
++  _LT_TAGVAR(link_all_deplibs, $1)=yes
++  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++  case $cc_basename in
++     ifort*) _lt_dar_can_shared=yes ;;
++     *) _lt_dar_can_shared=$GCC ;;
++  esac
++  if test "$_lt_dar_can_shared" = "yes"; then
++    output_verbose_link_cmd=func_echo_all
++    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++    m4_if([$1], [CXX],
++[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
++    fi
++],[])
++  else
++  _LT_TAGVAR(ld_shlibs, $1)=no
++  fi
++])
++
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
++m4_defun([_LT_SYS_MODULE_PATH_AIX],
++[m4_require([_LT_DECL_SED])dnl
++if test "${lt_cv_aix_libpath+set}" = set; then
++  aix_libpath=$lt_cv_aix_libpath
++else
++  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++  lt_aix_libpath_sed='[
++      /Import File Strings/,/^$/ {
++	  /^0/ {
++	      s/^0  *\([^ ]*\) *$/\1/
++	      p
++	  }
++      }]'
++  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++  # Check for a 64-bit object if we didn't find anything.
++  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++  fi],[])
++  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++  fi
++  ])
++  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
++])# _LT_SYS_MODULE_PATH_AIX
++
++
++# _LT_SHELL_INIT(ARG)
++# -------------------
++m4_define([_LT_SHELL_INIT],
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
++
++
++# _LT_PROG_ECHO_BACKSLASH
++# -----------------------
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
++m4_defun([_LT_PROG_ECHO_BACKSLASH],
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++  ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++  ECHO='printf %s\n'
++else
++  # Use this function as a fallback that always works.
++  func_fallback_echo ()
++  {
++    eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++  }
++  ECHO='func_fallback_echo'
++fi
++
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*" 
++}
++
++case "$ECHO" in
++  printf*) AC_MSG_RESULT([printf]) ;;
++  print*) AC_MSG_RESULT([print -r]) ;;
++  *) AC_MSG_RESULT([cat]) ;;
++esac
++
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++    PATH=/empty FPATH=/empty; export PATH FPATH
++    test "X`printf %s $ECHO`" = "X$ECHO" \
++      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
++
++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
++])# _LT_PROG_ECHO_BACKSLASH
++
++
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[  --with-sysroot[=DIR] Search for dependent libraries within DIR
++                        (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted.  We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++   if test "$GCC" = yes; then
++     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++   fi
++   ;; #(
++ /*)
++   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++   ;; #(
++ no|'')
++   ;; #(
++ *)
++   AC_MSG_RESULT([${with_sysroot}])
++   AC_MSG_ERROR([The sysroot must be an absolute path.])
++   ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
++# _LT_ENABLE_LOCK
++# ---------------
++m4_defun([_LT_ENABLE_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++  [AS_HELP_STRING([--disable-libtool-lock],
++    [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.$ac_objext` in
++      *ELF-32*)
++	HPUX_IA64_MODE="32"
++	;;
++      *ELF-64*)
++	HPUX_IA64_MODE="64"
++	;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++*-*-irix6*)
++  # Find out which ABI we are using.
++  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    if test "$lt_cv_prog_gnu_ld" = yes; then
++      case `/usr/bin/file conftest.$ac_objext` in
++	*32-bit*)
++	  LD="${LD-ld} -melf32bsmip"
++	  ;;
++	*N32*)
++	  LD="${LD-ld} -melf32bmipn32"
++	  ;;
++	*64-bit*)
++	  LD="${LD-ld} -melf64bmip"
++	;;
++      esac
++    else
++      case `/usr/bin/file conftest.$ac_objext` in
++	*32-bit*)
++	  LD="${LD-ld} -32"
++	  ;;
++	*N32*)
++	  LD="${LD-ld} -n32"
++	  ;;
++	*64-bit*)
++	  LD="${LD-ld} -64"
++	  ;;
++      esac
++    fi
++  fi
++  rm -rf conftest*
++  ;;
++
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++      *32-bit*)
++	case $host in
++	  x86_64-*kfreebsd*-gnu)
++	    LD="${LD-ld} -m elf_i386_fbsd"
++	    ;;
++	  x86_64-*linux*)
++	    LD="${LD-ld} -m elf_i386"
++	    ;;
++	  ppc64-*linux*|powerpc64-*linux*)
++	    LD="${LD-ld} -m elf32ppclinux"
++	    ;;
++	  s390x-*linux*)
++	    LD="${LD-ld} -m elf_s390"
++	    ;;
++	  sparc64-*linux*)
++	    LD="${LD-ld} -m elf32_sparc"
++	    ;;
++	esac
++	;;
++      *64-bit*)
++	case $host in
++	  x86_64-*kfreebsd*-gnu)
++	    LD="${LD-ld} -m elf_x86_64_fbsd"
++	    ;;
++	  x86_64-*linux*)
++	    LD="${LD-ld} -m elf_x86_64"
++	    ;;
++	  ppc*-*linux*|powerpc*-*linux*)
++	    LD="${LD-ld} -m elf64ppc"
++	    ;;
++	  s390*-*linux*|s390*-*tpf*)
++	    LD="${LD-ld} -m elf64_s390"
++	    ;;
++	  sparc*-*linux*)
++	    LD="${LD-ld} -m elf64_sparc"
++	    ;;
++	esac
++	;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++    [AC_LANG_PUSH(C)
++     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++     AC_LANG_POP])
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*)
++        case $host in
++        i?86-*-solaris*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        sparc*-*-solaris*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++        esac
++        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
++        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
++          LD="${LD-ld}_sol2"
++        fi
++        ;;
++      *)
++	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++	  LD="${LD-ld} -64"
++	fi
++	;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++esac
++
++need_locks="$enable_libtool_lock"
++])# _LT_ENABLE_LOCK
++
++
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++  [lt_cv_ar_at_file=no
++   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++     [echo conftest.$ac_objext > conftest.lst
++      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++      AC_TRY_EVAL([lt_ar_try])
++      if test "$ac_status" -eq 0; then
++	# Ensure the archiver fails upon bogus file names.
++	rm -f conftest.$ac_objext libconftest.a
++	AC_TRY_EVAL([lt_ar_try])
++	if test "$ac_status" -ne 0; then
++          lt_cv_ar_at_file=@
++        fi
++      fi
++      rm -f conftest.* libconftest.a
++     ])
++  ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++  archiver_list_spec=
++else
++  archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++  [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
++# _LT_CMD_OLD_ARCHIVE
++# -------------------
++m4_defun([_LT_CMD_OLD_ARCHIVE],
++[_LT_PROG_AR
++
++AC_CHECK_TOOL(STRIP, strip, :)
++test -z "$STRIP" && STRIP=:
++_LT_DECL([], [STRIP], [1], [A symbol stripping program])
++
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++test -z "$RANLIB" && RANLIB=:
++_LT_DECL([], [RANLIB], [1],
++    [Commands used to install an old-style archive])
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
++fi
++
++case $host_os in
++  darwin*)
++    lock_old_archive_extraction=yes ;;
++  *)
++    lock_old_archive_extraction=no ;;
++esac
++_LT_DECL([], [old_postinstall_cmds], [2])
++_LT_DECL([], [old_postuninstall_cmds], [2])
++_LT_TAGDECL([], [old_archive_cmds], [2],
++    [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++    [Whether to use a lock for old archive extraction])
++])# _LT_CMD_OLD_ARCHIVE
++
++
++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([_LT_COMPILER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$3"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       $2=yes
++     fi
++   fi
++   $RM conftest*
++])
++
++if test x"[$]$2" = xyes; then
++    m4_if([$5], , :, [$5])
++else
++    m4_if([$6], , :, [$6])
++fi
++])# _LT_COMPILER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
++
++
++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#                  [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------
++# Check whether the given linker option works
++AC_DEFUN([_LT_LINKER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $3"
++   echo "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&AS_MESSAGE_LOG_FD
++       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         $2=yes
++       fi
++     else
++       $2=yes
++     fi
++   fi
++   $RM -r conftest*
++   LDFLAGS="$save_LDFLAGS"
++])
++
++if test x"[$]$2" = xyes; then
++    m4_if([$4], , :, [$4])
++else
++    m4_if([$5], , :, [$5])
++fi
++])# _LT_LINKER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
++
++
++# LT_CMD_MAX_LEN
++#---------------
++AC_DEFUN([LT_CMD_MAX_LEN],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++  i=0
++  teststring="ABCD"
++
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
++
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
++
++  cygwin* | mingw* | cegcc*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  mint*)
++    # On MiNT this can take a long time and run out of memory.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
++
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
++
++  os2*)
++    # The test takes a long time on OS/2.
++    lt_cv_sys_max_cmd_len=8192
++    ;;
++
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
++    ;;
++  *)
++    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++    if test -n "$lt_cv_sys_max_cmd_len"; then
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    else
++      # Make teststring a little bigger before we do anything with it.
++      # a 1K string should be a reasonable start.
++      for i in 1 2 3 4 5 6 7 8 ; do
++        teststring=$teststring$teststring
++      done
++      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++      # If test is not a shell built-in, we'll probably end up computing a
++      # maximum length that is only half of the actual maximum length, but
++      # we can't tell.
++      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
++	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
++	      test $i != 17 # 1/2 MB should be enough
++      do
++        i=`expr $i + 1`
++        teststring=$teststring$teststring
++      done
++      # Only check the string length outside the loop.
++      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++      teststring=
++      # Add a significant safety factor because C++ compilers can tack on
++      # massive amounts of additional arguments before passing them to the
++      # linker.  It appears as though 1/2 is a usable value.
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    fi
++    ;;
++  esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++  AC_MSG_RESULT(none)
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
++_LT_DECL([], [max_cmd_len], [0],
++    [What is the maximum length of a command?])
++])# LT_CMD_MAX_LEN
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
++
++
++# _LT_HEADER_DLFCN
++# ----------------
++m4_defun([_LT_HEADER_DLFCN],
++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
++])# _LT_HEADER_DLFCN
++
++
++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ----------------------------------------------------------------
++m4_defun([_LT_TRY_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++  [$4]
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<_LT_EOF
++[#line $LINENO "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL		RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL		DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL		0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW		DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW	RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW	DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW	0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++/* When -fvisbility=hidden is used, assume the code has been annotated
++   correspondingly for the symbols needed.  */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else
++        {
++	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
++          else puts (dlerror ());
++	}
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++  return status;
++}]
++_LT_EOF
++  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) $1 ;;
++      x$lt_dlneed_uscore) $2 ;;
++      x$lt_dlunknown|x*) $3 ;;
++    esac
++  else :
++    # compilation failed
++    $3
++  fi
++fi
++rm -fr conftest*
++])# _LT_TRY_DLOPEN_SELF
++
++
++# LT_SYS_DLOPEN_SELF
++# ------------------
++AC_DEFUN([LT_SYS_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
++else
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32* | cegcc*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++    ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++    ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ])
++    ;;
++
++  *)
++    AC_CHECK_FUNC([shl_load],
++	  [lt_cv_dlopen="shl_load"],
++      [AC_CHECK_LIB([dld], [shl_load],
++	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
++	[AC_CHECK_FUNC([dlopen],
++	      [lt_cv_dlopen="dlopen"],
++	  [AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++	    [AC_CHECK_LIB([svld], [dlopen],
++		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++	      [AC_CHECK_LIB([dld], [dld_link],
++		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
++	      ])
++	    ])
++	  ])
++	])
++      ])
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    AC_CACHE_CHECK([whether a program can dlopen itself],
++	  lt_cv_dlopen_self, [dnl
++	  _LT_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++    ])
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++	  lt_cv_dlopen_self_static, [dnl
++	  _LT_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
++      ])
++    fi
++
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
++
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
++
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
++fi
++_LT_DECL([dlopen_support], [enable_dlopen], [0],
++	 [Whether dlopen is supported])
++_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
++	 [Whether dlopen of programs is supported])
++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
++	 [Whether dlopen of statically linked programs is supported])
++])# LT_SYS_DLOPEN_SELF
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
++
++
++# _LT_COMPILER_C_O([TAGNAME])
++# ---------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler.
++# This macro does not hard code the compiler like AC_PROG_CC_C_O.
++m4_defun([_LT_COMPILER_C_O],
++[m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++   $RM -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++     fi
++   fi
++   chmod u+w . 2>&AS_MESSAGE_LOG_FD
++   $RM conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++   $RM out/* && rmdir out
++   cd ..
++   $RM -r conftest
++   $RM conftest*
++])
++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
++	[Does compiler simultaneously support -c and -o options?])
++])# _LT_COMPILER_C_O
++
++
++# _LT_COMPILER_FILE_LOCKS([TAGNAME])
++# ----------------------------------
++# Check to see if we can do hard links to lock some files if needed
++m4_defun([_LT_COMPILER_FILE_LOCKS],
++[m4_require([_LT_ENABLE_LOCK])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_COMPILER_C_O([$1])
++
++hard_links="nottested"
++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  AC_MSG_CHECKING([if we can lock with hard links])
++  hard_links=yes
++  $RM conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  AC_MSG_RESULT([$hard_links])
++  if test "$hard_links" = no; then
++    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
++])# _LT_COMPILER_FILE_LOCKS
++
++
++# _LT_CHECK_OBJDIR
++# ----------------
++m4_defun([_LT_CHECK_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++_LT_DECL([], [objdir], [0],
++         [The name of the directory that contains temporary libtool files])dnl
++m4_pattern_allow([LT_OBJDIR])dnl
++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
++  [Define to the sub-directory in which libtool stores uninstalled libraries.])
++])# _LT_CHECK_OBJDIR
++
++
++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
++# --------------------------------------
++# Check hardcoding attributes.
++m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
++   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
++   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++  # We can hardcode non-existent directories.
++  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
++    # Linking always hardcodes the temporary library directory.
++    _LT_TAGVAR(hardcode_action, $1)=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    _LT_TAGVAR(hardcode_action, $1)=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  _LT_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
++   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++_LT_TAGDECL([], [hardcode_action], [0],
++    [How to hardcode a shared library path into an executable])
++])# _LT_LINKER_HARDCODE_LIBPATH
++
++
++# _LT_CMD_STRIPLIB
++# ----------------
++m4_defun([_LT_CMD_STRIPLIB],
++[m4_require([_LT_DECL_EGREP])
++striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++  darwin*)
++    if test -n "$STRIP" ; then
++      striplib="$STRIP -x"
++      old_striplib="$STRIP -S"
++      AC_MSG_RESULT([yes])
++    else
++      AC_MSG_RESULT([no])
++    fi
++    ;;
++  *)
++    AC_MSG_RESULT([no])
++    ;;
++  esac
++fi
++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
++_LT_DECL([], [striplib], [1])
++])# _LT_CMD_STRIPLIB
++
++
++# _LT_SYS_DYNAMIC_LINKER([TAG])
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++m4_defun([_LT_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_OBJDUMP])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++m4_if([$1],
++	[], [
++if test "$GCC" = yes; then
++  case $host_os in
++    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++    *) lt_awk_arg="/^libraries:/" ;;
++  esac
++  case $host_os in
++    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++    *) lt_sed_strip_eq="s,=/,/,g" ;;
++  esac
++  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++  case $lt_search_path_spec in
++  *\;*)
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++    ;;
++  *)
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++    ;;
++  esac
++  # Ok, now we have the path, separated by spaces, we can step through it
++  # and add multilib dir if necessary.
++  lt_tmp_lt_search_path_spec=
++  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++  for lt_sys_path in $lt_search_path_spec; do
++    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++    else
++      test -d "$lt_sys_path" && \
++	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++    fi
++  done
++  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++  lt_foo="";
++  lt_count=0;
++  for (lt_i = NF; lt_i > 0; lt_i--) {
++    if ($lt_i != "" && $lt_i != ".") {
++      if ($lt_i == "..") {
++        lt_count++;
++      } else {
++        if (lt_count == 0) {
++          lt_foo="/" $lt_i lt_foo;
++        } else {
++          lt_count--;
++        }
++      }
++    }
++  }
++  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++  # AWK program above erroneously prepends '/' to C:/dos/paths
++  # for these hosts.
++  case $host_os in
++    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++  esac
++  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix[[4-9]]*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[[01]] | aix4.[[01]].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  case $host_cpu in
++  powerpc)
++    # Since July 2007 AmigaOS4 officially supports .so libraries.
++    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    ;;
++  m68k)
++    library_names_spec='$libname.ixlibrary $libname.a'
++    # Create ${libname}_ixlibrary.a entries in /sys/libs.
++    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++    ;;
++  esac
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[[45]]*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32* | cegcc*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$cc_basename in
++  yes,*)
++    # gcc
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname~
++      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++      fi'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $RM \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++m4_if([$1], [],[
++      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
++      ;;
++    mingw* | cegcc*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    dynamic_linker='Win32 ld.exe'
++    ;;
++
++  *,cl*)
++    # Native MSVC
++    libname_spec='$name'
++    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++    library_names_spec='${libname}.dll.lib'
++
++    case $build_os in
++    mingw*)
++      sys_lib_search_path_spec=
++      lt_save_ifs=$IFS
++      IFS=';'
++      for lt_path in $LIB
++      do
++        IFS=$lt_save_ifs
++        # Let DOS variable expansion print the short 8.3 style file name.
++        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++      done
++      IFS=$lt_save_ifs
++      # Convert to MSYS style.
++      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++      ;;
++    cygwin*)
++      # Convert to unix form, then to dos form, then back to unix form
++      # but this time dos style (no spaces!) so that the unix form looks
++      # like /cygdrive/c/PROGRA~1:/cygdr...
++      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++      ;;
++    *)
++      sys_lib_search_path_spec="$LIB"
++      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++        # It is most probably a Windows format PATH.
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      # FIXME: find the short name or the path components, as spaces are
++      # common. (e.g. "Program Files" -> "PROGRA~1")
++      ;;
++    esac
++
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $RM \$dlpath'
++    shlibpath_overrides_runpath=yes
++    dynamic_linker='Win32 link.exe'
++    ;;
++
++  *)
++    # Assume MSVC wrapper
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    dynamic_linker='Win32 ld.exe'
++    ;;
++  esac
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++m4_if([$1], [],[
++  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[[23]].*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2.*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  *) # from 4.6 on, and DragonFly
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++haiku*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  dynamic_linker="$host_os runtime_loader"
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  hppa*64*)
++    shrext_cmds='.sl'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
++  postinstall_cmds='chmod 555 $lib'
++  # or fails outright, so override atomically:
++  install_override_mode=555
++  ;;
++
++interix[[3-9]]*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux # correct to gnu/linux during the next big refactor
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++
++  # Some binutils ld are patched to set DT_RUNPATH
++  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++    [lt_cv_shlibpath_overrides_runpath=no
++    save_LDFLAGS=$LDFLAGS
++    save_libdir=$libdir
++    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++	 [lt_cv_shlibpath_overrides_runpath=yes])])
++    LDFLAGS=$save_LDFLAGS
++    libdir=$save_libdir
++    ])
++  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
++
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++*nto* | *qnx*)
++  version_type=qnx
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='ldqnx.so'
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
++    *)				need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[[89]] | openbsd2.[[89]].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++rdos*)
++  dynamic_linker=no
++  ;;
++
++solaris*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux # correct to gnu/linux during the next big refactor
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++tpf*)
++  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
++  version_type=linux # correct to gnu/linux during the next big refactor
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++uts4*)
++  version_type=linux # correct to gnu/linux during the next big refactor
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++AC_MSG_RESULT([$dynamic_linker])
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++fi
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++fi
++
++_LT_DECL([], [variables_saved_for_relink], [1],
++    [Variables whose values should be saved in libtool wrapper scripts and
++    restored at link time])
++_LT_DECL([], [need_lib_prefix], [0],
++    [Do we need the "lib" prefix for modules?])
++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
++_LT_DECL([], [version_type], [0], [Library versioning type])
++_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
++_LT_DECL([], [shlibpath_overrides_runpath], [0],
++    [Is shlibpath searched before the hard-coded library search path?])
++_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
++_LT_DECL([], [library_names_spec], [1],
++    [[List of archive names.  First name is the real one, the rest are links.
++    The last name is the one that the linker finds with -lNAME]])
++_LT_DECL([], [soname_spec], [1],
++    [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++    [Permission mode override for installation of shared libraries])
++_LT_DECL([], [postinstall_cmds], [2],
++    [Command to use after installation of a shared archive])
++_LT_DECL([], [postuninstall_cmds], [2],
++    [Command to use after uninstallation of a shared archive])
++_LT_DECL([], [finish_cmds], [2],
++    [Commands used to finish a libtool library installation in a directory])
++_LT_DECL([], [finish_eval], [1],
++    [[As "finish_cmds", except a single script fragment to be evaled but
++    not shown]])
++_LT_DECL([], [hardcode_into_libs], [0],
++    [Whether we should hardcode library paths into libraries])
++_LT_DECL([], [sys_lib_search_path_spec], [2],
++    [Compile-time system search path for libraries])
++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
++    [Run-time system search path for libraries])
++])# _LT_SYS_DYNAMIC_LINKER
++
++
++# _LT_PATH_TOOL_PREFIX(TOOL)
++# --------------------------
++# find a file program which can recognize shared library
++AC_DEFUN([_LT_PATH_TOOL_PREFIX],
++[m4_require([_LT_DECL_EGREP])dnl
++AC_MSG_CHECKING([for $1])
++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
++[case $MAGIC_CMD in
++[[\\/*] |  ?:[\\/]*])
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++dnl $ac_dummy forces splitting on constant user-supplied paths.
++dnl POSIX.2 word splitting is done only on the output of word expansions,
++dnl not every word.  This closes a longstanding sh security hole.
++  ac_dummy="m4_if([$2], , $PATH, [$2])"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$1; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
++      if test -n "$file_magic_test_file"; then
++	case $deplibs_check_method in
++	"file_magic "*)
++	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++	    $EGREP "$file_magic_regex" > /dev/null; then
++	    :
++	  else
++	    cat <<_LT_EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
++
++_LT_EOF
++	  fi ;;
++	esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac])
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  AC_MSG_RESULT($MAGIC_CMD)
++else
++  AC_MSG_RESULT(no)
++fi
++_LT_DECL([], [MAGIC_CMD], [0],
++	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
++])# _LT_PATH_TOOL_PREFIX
++
++# Old name:
++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
++
++
++# _LT_PATH_MAGIC
++# --------------
++# find a file program which can recognize a shared library
++m4_defun([_LT_PATH_MAGIC],
++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++  if test -n "$ac_tool_prefix"; then
++    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
++  else
++    MAGIC_CMD=:
++  fi
++fi
++])# _LT_PATH_MAGIC
++
++
++# LT_PATH_LD
++# ----------
++# find the pathname to the GNU or non-GNU linker
++AC_DEFUN([LT_PATH_LD],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
++
++AC_ARG_WITH([gnu-ld],
++    [AS_HELP_STRING([--with-gnu-ld],
++	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
++    [test "$withval" = no || with_gnu_ld=yes],
++    [with_gnu_ld=no])dnl
++
++ac_prog=ld
++if test "$GCC" = yes; then
++  # Check if gcc -print-prog-name=ld gives a path.
++  AC_MSG_CHECKING([for ld used by $CC])
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
++    # Accept absolute paths.
++    [[\\/]]* | ?:[[\\/]]*)
++      re_direlt='/[[^/]][[^/]]*/\.\./'
++      # Canonicalize the pathname of ld
++      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
++      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
++	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
++      done
++      test -z "$LD" && LD="$ac_prog"
++      ;;
++  "")
++    # If it fails, then pretend we aren't using GCC.
++    ac_prog=ld
++    ;;
++  *)
++    # If it is relative, then search for the first ld in PATH.
++    with_gnu_ld=unknown
++    ;;
++  esac
++elif test "$with_gnu_ld" = yes; then
++  AC_MSG_CHECKING([for GNU ld])
++else
++  AC_MSG_CHECKING([for non-GNU ld])
++fi
++AC_CACHE_VAL(lt_cv_path_LD,
++[if test -z "$LD"; then
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++      lt_cv_path_LD="$ac_dir/$ac_prog"
++      # Check to see if the program is GNU ld.  I'd rather use --version,
++      # but apparently some variants of GNU ld only accept -v.
++      # Break only if it was the GNU/non-GNU ld that we prefer.
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
++	test "$with_gnu_ld" != no && break
++	;;
++      *)
++	test "$with_gnu_ld" != yes && break
++	;;
++      esac
++    fi
++  done
++  IFS="$lt_save_ifs"
++else
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi])
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++  AC_MSG_RESULT($LD)
++else
++  AC_MSG_RESULT(no)
++fi
++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
++_LT_PATH_LD_GNU
++AC_SUBST([LD])
++
++_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
++])# LT_PATH_LD
++
++# Old names:
++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_LD], [])
++dnl AC_DEFUN([AC_PROG_LD], [])
++
++
++# _LT_PATH_LD_GNU
++#- --------------
++m4_defun([_LT_PATH_LD_GNU],
++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
++  ;;
++esac])
++with_gnu_ld=$lt_cv_prog_gnu_ld
++])# _LT_PATH_LD_GNU
++
++
++# _LT_CMD_RELOAD
++# --------------
++# find reload flag for linker
++#   -- PORTME Some linkers may need a different reload flag.
++m4_defun([_LT_CMD_RELOAD],
++[AC_CACHE_CHECK([for $LD option to reload object files],
++  lt_cv_ld_reload_flag,
++  [lt_cv_ld_reload_flag='-r'])
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++  cygwin* | mingw* | pw32* | cegcc*)
++    if test "$GCC" != yes; then
++      reload_cmds=false
++    fi
++    ;;
++  darwin*)
++    if test "$GCC" = yes; then
++      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++    else
++      reload_cmds='$LD$reload_flag -o $output$reload_objs'
++    fi
++    ;;
++esac
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
++])# _LT_CMD_RELOAD
++
++
++# _LT_CHECK_MAGIC_METHOD
++# ----------------------
++# how to check for library dependencies
++#  -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_MAGIC_METHOD],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++AC_CACHE_CHECK([how to recognize dependent libraries],
++lt_cv_deplibs_check_method,
++[lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[[4-9]]*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++beos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++bsdi[[45]]*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
++  lt_cv_file_magic_cmd='/usr/bin/file -L'
++  lt_cv_file_magic_test_file=/shlib/libc.so
++  ;;
++
++cygwin*)
++  # func_win32_libid is a shell function defined in ltmain.sh
++  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++  lt_cv_file_magic_cmd='func_win32_libid'
++  ;;
++
++mingw* | pw32*)
++  # Base MSYS/MinGW do not provide the 'file' command needed by
++  # func_win32_libid shell function, so use a weaker test based on 'objdump',
++  # unless we find 'file', for example because we are cross-compiling.
++  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
++    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++    lt_cv_file_magic_cmd='func_win32_libid'
++  else
++    # Keep this pattern in sync with the one in func_win32_libid.
++    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
++    lt_cv_file_magic_cmd='$OBJDUMP -f'
++  fi
++  ;;
++
++cegcc*)
++  # use the weaker test based on 'objdump'. See mingw*.
++  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
++  lt_cv_file_magic_cmd='$OBJDUMP -f'
++  ;;
++
++darwin* | rhapsody*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++freebsd* | dragonfly*)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    case $host_cpu in
++    i*86 )
++      # Not sure whether the presence of OpenBSD here was a mistake.
++      # Let's accept both of them until this is cleared up.
++      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
++      lt_cv_file_magic_cmd=/usr/bin/file
++      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++      ;;
++    esac
++  else
++    lt_cv_deplibs_check_method=pass_all
++  fi
++  ;;
++
++haiku*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++hpux10.20* | hpux11*)
++  lt_cv_file_magic_cmd=/usr/bin/file
++  case $host_cpu in
++  ia64*)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
++    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++    ;;
++  hppa*64*)
++    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
++    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++    ;;
++  *)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
++    lt_cv_file_magic_test_file=/usr/lib/libc.sl
++    ;;
++  esac
++  ;;
++
++interix[[3-9]]*)
++  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $LD in
++  *-32|*"-32 ") libmagic=32-bit;;
++  *-n32|*"-n32 ") libmagic=N32;;
++  *-64|*"-64 ") libmagic=64-bit;;
++  *) libmagic=never-match;;
++  esac
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++netbsd* | netbsdelf*-gnu)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
++  fi
++  ;;
++
++newos6*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
++  lt_cv_file_magic_cmd=/usr/bin/file
++  lt_cv_file_magic_test_file=/usr/lib/libnls.so
++  ;;
++
++*nto* | *qnx*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++openbsd*)
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  fi
++  ;;
++
++osf3* | osf4* | osf5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++rdos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++solaris*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv4 | sysv4.3*)
++  case $host_vendor in
++  motorola)
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
++    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++    ;;
++  ncr)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  sequent)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++    ;;
++  sni)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
++    lt_cv_file_magic_test_file=/lib/libc.so
++    ;;
++  siemens)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  pc)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  esac
++  ;;
++
++tpf*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++esac
++])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++  case $host_os in
++  mingw* | pw32*)
++    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++      want_nocaseglob=yes
++    else
++      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++    fi
++    ;;
++  esac
++fi
++
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++
++_LT_DECL([], [deplibs_check_method], [1],
++    [Method to check whether dependent libraries are shared objects])
++_LT_DECL([], [file_magic_cmd], [1],
++    [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++    [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
++])# _LT_CHECK_MAGIC_METHOD
++
++
++# LT_PATH_NM
++# ----------
++# find the pathname to a BSD- or MS-compatible name lister
++AC_DEFUN([LT_PATH_NM],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
++[if test -n "$NM"; then
++  # Let the user override the test.
++  lt_cv_path_NM="$NM"
++else
++  lt_nm_to_check="${ac_tool_prefix}nm"
++  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++    lt_nm_to_check="$lt_nm_to_check nm"
++  fi
++  for lt_tmp_nm in $lt_nm_to_check; do
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++      IFS="$lt_save_ifs"
++      test -z "$ac_dir" && ac_dir=.
++      tmp_nm="$ac_dir/$lt_tmp_nm"
++      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++	# Check to see if the nm accepts a BSD-compat flag.
++	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
++	#   nm: unknown option "B" ignored
++	# Tru64's nm complains that /dev/null is an invalid object file
++	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++	*/dev/null* | *'Invalid file or object type'*)
++	  lt_cv_path_NM="$tmp_nm -B"
++	  break
++	  ;;
++	*)
++	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++	  */dev/null*)
++	    lt_cv_path_NM="$tmp_nm -p"
++	    break
++	    ;;
++	  *)
++	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++	    continue # so that we can try to find one that supports BSD flags
++	    ;;
++	  esac
++	  ;;
++	esac
++      fi
++    done
++    IFS="$lt_save_ifs"
++  done
++  : ${lt_cv_path_NM=no}
++fi])
++if test "$lt_cv_path_NM" != "no"; then
++  NM="$lt_cv_path_NM"
++else
++  # Didn't find any BSD compatible name lister, look for dumpbin.
++  if test -n "$DUMPBIN"; then :
++    # Let the user override the test.
++  else
++    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++    *COFF*)
++      DUMPBIN="$DUMPBIN -symbols"
++      ;;
++    *)
++      DUMPBIN=:
++      ;;
++    esac
++  fi
++  AC_SUBST([DUMPBIN])
++  if test "$DUMPBIN" != ":"; then
++    NM="$DUMPBIN"
++  fi
++fi
++test -z "$NM" && NM=nm
++AC_SUBST([NM])
++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
++
++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
++  [lt_cv_nm_interface="BSD nm"
++  echo "int some_variable = 0;" > conftest.$ac_ext
++  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++  (eval "$ac_compile" 2>conftest.err)
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
++  cat conftest.out >&AS_MESSAGE_LOG_FD
++  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
++    lt_cv_nm_interface="MS dumpbin"
++  fi
++  rm -f conftest*])
++])# LT_PATH_NM
++
++# Old names:
++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_NM], [])
++dnl AC_DEFUN([AC_PROG_NM], [])
++
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++#  -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++  # two different shell functions defined in ltmain.sh
++  # decide which to use based on capabilities of $DLLTOOL
++  case `$DLLTOOL --help 2>&1` in
++  *--identify-strict*)
++    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++    ;;
++  *)
++    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++    ;;
++  esac
++  ;;
++*)
++  # fallback: assume linklib IS sharedlib
++  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++  ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++    [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++  [lt_cv_path_mainfest_tool=no
++  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++    lt_cv_path_mainfest_tool=yes
++  fi
++  rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++  MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
++  # These system don't have libm, or don't need it
++  ;;
++*-ncr-sysv4.3*)
++  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++  ;;
++*)
++  AC_CHECK_LIB(m, cos, LIBM="-lm")
++  ;;
++esac
++AC_SUBST([LIBM])
++])# LT_LIB_M
++
++# Old name:
++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_CHECK_LIBM], [])
++
++
++# _LT_COMPILER_NO_RTTI([TAGNAME])
++# -------------------------------
++m4_defun([_LT_COMPILER_NO_RTTI],
++[m4_require([_LT_TAG_COMPILER])dnl
++
++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++
++if test "$GCC" = yes; then
++  case $cc_basename in
++  nvcc*)
++    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++  *)
++    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++  esac
++
++  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
++    lt_cv_prog_compiler_rtti_exceptions,
++    [-fno-rtti -fno-exceptions], [],
++    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
++fi
++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
++	[Compiler flag to turn off builtin functions])
++])# _LT_COMPILER_NO_RTTI
++
++
++# _LT_CMD_GLOBAL_SYMBOLS
++# ----------------------
++m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++AC_MSG_CHECKING([command to parse $NM output from $compiler object])
++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
++[
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[[BCDEGRST]]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++  symcode='[[BCDT]]'
++  ;;
++cygwin* | mingw* | pw32* | cegcc*)
++  symcode='[[ABCDGISTW]]'
++  ;;
++hpux*)
++  if test "$host_cpu" = ia64; then
++    symcode='[[ABCDEGRST]]'
++  fi
++  ;;
++irix* | nonstopux*)
++  symcode='[[BCDEGRST]]'
++  ;;
++osf*)
++  symcode='[[BCDEGQRST]]'
++  ;;
++solaris*)
++  symcode='[[BDRT]]'
++  ;;
++sco3.2v5*)
++  symcode='[[DT]]'
++  ;;
++sysv4.2uw2*)
++  symcode='[[DT]]'
++  ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++  symcode='[[ABDT]]'
++  ;;
++sysv4)
++  symcode='[[DFNSTU]]'
++  ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++  symcode='[[ABCDGIRSTW]]' ;;
++esac
++
++# Transform an extracted symbol line into a proper C declaration.
++# Some systems (esp. on ia64) link data and code symbols differently,
++# so use this general approach.
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++  ;;
++esac
++
++# Try without a prefix underscore, then with it.
++for ac_symprfx in "" "_"; do
++
++  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++  symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++  # Write the raw and C identifiers.
++  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++    # Fake it for dumpbin and say T for any non-static function
++    # and D for any global variable.
++    # Also find C++ and __fastcall symbols from MSVC++,
++    # which start with @ or ?.
++    lt_cv_sys_global_symbol_pipe="$AWK ['"\
++"     {last_section=section; section=\$ 3};"\
++"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
++"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
++"     \$ 0!~/External *\|/{next};"\
++"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
++"     {if(hide[section]) next};"\
++"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
++"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
++"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
++"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
++"     ' prfx=^$ac_symprfx]"
++  else
++    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++  fi
++  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
++
++  # Check to see that the pipe works correctly.
++  pipe_works=no
++
++  rm -f conftest*
++  cat > conftest.$ac_ext <<_LT_EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(void);
++void nm_test_func(void){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++_LT_EOF
++
++  if AC_TRY_EVAL(ac_compile); then
++    # Now try to grab the symbols.
++    nlist=conftest.nm
++    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
++      # Try sorting and uniquifying the output.
++      if sort "$nlist" | uniq > "$nlist"T; then
++	mv -f "$nlist"T "$nlist"
++      else
++	rm -f "$nlist"T
++      fi
++
++      # Make sure that we snagged all the symbols we need.
++      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
++	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
++	  cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT@&t@_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT@&t@_DLSYM_CONST
++#else
++# define LT@&t@_DLSYM_CONST const
++#endif
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++_LT_EOF
++	  # Now generate the symbol file.
++	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
++
++	  cat <<_LT_EOF >> conftest.$ac_ext
++
++/* The mapping between symbol names and symbols.  */
++LT@&t@_DLSYM_CONST struct {
++  const char *name;
++  void       *address;
++}
++lt__PROGRAM__LTX_preloaded_symbols[[]] =
++{
++  { "@PROGRAM@", (void *) 0 },
++_LT_EOF
++	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
++	  cat <<\_LT_EOF >> conftest.$ac_ext
++  {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++  return lt__PROGRAM__LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++_LT_EOF
++	  # Now try linking the two files.
++	  mv conftest.$ac_objext conftstm.$ac_objext
++	  lt_globsym_save_LIBS=$LIBS
++	  lt_globsym_save_CFLAGS=$CFLAGS
++	  LIBS="conftstm.$ac_objext"
++	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
++	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
++	    pipe_works=yes
++	  fi
++	  LIBS=$lt_globsym_save_LIBS
++	  CFLAGS=$lt_globsym_save_CFLAGS
++	else
++	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
++	fi
++      else
++	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
++      fi
++    else
++      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
++    fi
++  else
++    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
++    cat conftest.$ac_ext >&5
++  fi
++  rm -rf conftest* conftst*
++
++  # Do not use the global_symbol_pipe unless it works.
++  if test "$pipe_works" = yes; then
++    break
++  else
++    lt_cv_sys_global_symbol_pipe=
++  fi
++done
++])
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++  lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++  AC_MSG_RESULT(failed)
++else
++  AC_MSG_RESULT(ok)
++fi
++
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++  nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++  nm_file_list_spec='@'
++fi
++
++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
++    [Take the output of nm and produce a listing of raw symbols and C names])
++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
++    [Transform the output of nm in a proper C declaration])
++_LT_DECL([global_symbol_to_c_name_address],
++    [lt_cv_sys_global_symbol_to_c_name_address], [1],
++    [Transform the output of nm in a C name address pair])
++_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
++    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
++    [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++    [Specify filename containing input files for $NM])
++]) # _LT_CMD_GLOBAL_SYMBOLS
++
++
++# _LT_COMPILER_PIC([TAGNAME])
++# ---------------------------
++m4_defun([_LT_COMPILER_PIC],
++[m4_require([_LT_TAG_COMPILER])dnl
++_LT_TAGVAR(lt_prog_compiler_wl, $1)=
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++_LT_TAGVAR(lt_prog_compiler_static, $1)=
++
++m4_if([$1], [CXX], [
++  # C++ specific cases for pic, static, wl, etc.
++  if test "$GXX" = yes; then
++    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++    aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++        ;;
++      m68k)
++            # FIXME: we need at least 68020 code to build shared libraries, but
++            # adding the `-m68020' flag to GCC prevents building anything better,
++            # like `-m68040'.
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++        ;;
++      esac
++      ;;
++
++    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++    mingw* | cygwin* | os2* | pw32* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      # Although the cygwin gcc ignores -fPIC, still need this for old-style
++      # (--disable-auto-import) libraries
++      m4_if([$1], [GCJ], [],
++	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++    *djgpp*)
++      # DJGPP does not support shared libraries at all
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++      ;;
++    haiku*)
++      # PIC is the default for Haiku.
++      # The "-static" flag exists, but is broken.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)=
++      ;;
++    interix[[3-9]]*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++    hpux*)
++      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
++      # sets the default TLS model and affects inlining.
++      case $host_cpu in
++      hppa*64*)
++	;;
++      *)
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	;;
++      esac
++      ;;
++    *qnx* | *nto*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++    *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++  else
++    case $host_os in
++      aix[[4-9]]*)
++	# All AIX code is PIC.
++	if test "$host_cpu" = ia64; then
++	  # AIX 5 now supports IA64 processor
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	else
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++	fi
++	;;
++      chorus*)
++	case $cc_basename in
++	cxch68*)
++	  # Green Hills C++ Compiler
++	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
++	  ;;
++	esac
++	;;
++      mingw* | cygwin* | os2* | pw32* | cegcc*)
++	# This hack is so that the source file can tell whether it is being
++	# built for inclusion in a dll (and should export symbols for example).
++	m4_if([$1], [GCJ], [],
++	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++	;;
++      dgux*)
++	case $cc_basename in
++	  ec++*)
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    ;;
++	  ghcx*)
++	    # Green Hills C++ Compiler
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      freebsd* | dragonfly*)
++	# FreeBSD uses GNU C++
++	;;
++      hpux9* | hpux10* | hpux11*)
++	case $cc_basename in
++	  CC*)
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++	    if test "$host_cpu" != ia64; then
++	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	    fi
++	    ;;
++	  aCC*)
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++	    case $host_cpu in
++	    hppa*64*|ia64*)
++	      # +Z the default
++	      ;;
++	    *)
++	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	      ;;
++	    esac
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      interix*)
++	# This is c89, which is MS Visual C++ (no shared libs)
++	# Anyone wants to do a port?
++	;;
++      irix5* | irix6* | nonstopux*)
++	case $cc_basename in
++	  CC*)
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    # CC pic flag -KPIC is the default.
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
++	case $cc_basename in
++	  KCC*)
++	    # KAI C++ Compiler
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	    ;;
++	  ecpc* )
++	    # old Intel C++ for x86_64 which still supported -KPIC.
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++	    ;;
++	  icpc* )
++	    # Intel C++, used to be incompatible with GCC.
++	    # ICC 10 doesn't accept -KPIC any more.
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++	    ;;
++	  pgCC* | pgcpp*)
++	    # Portland Group C++ compiler
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	  cxx*)
++	    # Compaq C++
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    ;;
++	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++	    # IBM XL 8.0, 9.0 on PPC and BlueGene
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++	    ;;
++	  *)
++	    case `$CC -V 2>&1 | sed 5q` in
++	    *Sun\ C*)
++	      # Sun C++ 5.9
++	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++	      ;;
++	    esac
++	    ;;
++	esac
++	;;
++      lynxos*)
++	;;
++      m88k*)
++	;;
++      mvs*)
++	case $cc_basename in
++	  cxx*)
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      netbsd* | netbsdelf*-gnu)
++	;;
++      *qnx* | *nto*)
++        # QNX uses GNU C++, but need to define -shared option too, otherwise
++        # it will coredump.
++        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++        ;;
++      osf3* | osf4* | osf5*)
++	case $cc_basename in
++	  KCC*)
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++	    ;;
++	  RCC*)
++	    # Rational C++ 2.4.1
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  cxx*)
++	    # Digital/Compaq C++
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      psos*)
++	;;
++      solaris*)
++	case $cc_basename in
++	  CC* | sunCC*)
++	    # Sun C++ 4.2, 5.x and Centerline C++
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++	    ;;
++	  gcx*)
++	    # Green Hills C++ Compiler
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sunos4*)
++	case $cc_basename in
++	  CC*)
++	    # Sun C++ 4.x
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	  lcc*)
++	    # Lucid
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++	case $cc_basename in
++	  CC*)
++	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	esac
++	;;
++      tandem*)
++	case $cc_basename in
++	  NCC*)
++	    # NonStop-UX NCC 3.20
++	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      vxworks*)
++	;;
++      *)
++	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++	;;
++    esac
++  fi
++],
++[
++  if test "$GCC" = yes; then
++    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++        ;;
++      m68k)
++            # FIXME: we need at least 68020 code to build shared libraries, but
++            # adding the `-m68020' flag to GCC prevents building anything better,
++            # like `-m68040'.
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++        ;;
++      esac
++      ;;
++
++    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      # Although the cygwin gcc ignores -fPIC, still need this for old-style
++      # (--disable-auto-import) libraries
++      m4_if([$1], [GCJ], [],
++	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++
++    haiku*)
++      # PIC is the default for Haiku.
++      # The "-static" flag exists, but is broken.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)=
++      ;;
++
++    hpux*)
++      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
++      # sets the default TLS model and affects inlining.
++      case $host_cpu in
++      hppa*64*)
++	# +Z the default
++	;;
++      *)
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	;;
++      esac
++      ;;
++
++    interix[[3-9]]*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      enable_shared=no
++      ;;
++
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++
++    *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++
++    case $cc_basename in
++    nvcc*) # Cuda Compiler Driver 2.2
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
++        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
++      fi
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      else
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      m4_if([$1], [GCJ], [],
++	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC (with -KPIC) is the default.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
++      case $cc_basename in
++      # old Intel for x86_64 which still supported -KPIC.
++      ecc*)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++        ;;
++      # icc used to be incompatible with GCC.
++      # ICC 10 doesn't accept -KPIC any more.
++      icc* | ifort*)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++        ;;
++      # Lahey Fortran 8.1.
++      lf95*)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
++	;;
++      nagfor*)
++	# NAG Fortran compiler
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	;;
++      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++	# which looks to be a dead project)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++        ;;
++      ccc*)
++        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++        # All Alpha code is PIC.
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++        ;;
++      xl* | bgxl* | bgf* | mpixl*)
++	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++	;;
++      *)
++	case `$CC -V 2>&1 | sed 5q` in
++	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
++	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
++	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++	  ;;
++	*Sun\ F* | *Sun*Fortran*)
++	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++	  ;;
++	*Sun\ C*)
++	  # Sun C 5.9
++	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	  ;;
++        *Intel*\ [[CF]]*Compiler*)
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++	  ;;
++	*Portland\ Group*)
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	  ;;
++	esac
++	;;
++      esac
++      ;;
++
++    newsos6)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++
++    osf3* | osf4* | osf5*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # All OSF/1 code is PIC.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    rdos*)
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    solaris*)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++      *)
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    unicos*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++
++    uts4*)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    *)
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++    esac
++  fi
++])
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++    ;;
++  *)
++    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
++    ;;
++esac
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
++  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
++    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
++    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
++    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
++     "" | " "*) ;;
++     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
++     esac],
++    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
++fi
++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
++	[Additional compiler flags for building library objects])
++
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++	[How to pass a linker flag through the compiler])
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
++  $lt_tmp_static_flag,
++  [],
++  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
++	[Compiler flag to prevent dynamic linking])
++])# _LT_COMPILER_PIC
++
++
++# _LT_LINKER_SHLIBS([TAGNAME])
++# ----------------------------
++# See if the linker supports building shared libraries.
++m4_defun([_LT_LINKER_SHLIBS],
++[AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++m4_if([$1], [CXX], [
++  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++  case $host_os in
++  aix[[4-9]]*)
++    # If we're using GNU nm, then we don't want the "-C" option.
++    # -C means demangle to AIX nm, but means don't demangle with GNU nm
++    # Also, AIX nm treats weak defined symbols like other global defined
++    # symbols, whereas GNU nm marks them as "W".
++    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++    else
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++    fi
++    ;;
++  pw32*)
++    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
++    ;;
++  cygwin* | mingw* | cegcc*)
++    case $cc_basename in
++    cl*)
++      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
++      ;;
++    *)
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++      ;;
++    esac
++    ;;
++  linux* | k*bsd*-gnu | gnu*)
++    _LT_TAGVAR(link_all_deplibs, $1)=no
++    ;;
++  *)
++    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++    ;;
++  esac
++], [
++  runpath_var=
++  _LT_TAGVAR(allow_undefined_flag, $1)=
++  _LT_TAGVAR(always_export_symbols, $1)=no
++  _LT_TAGVAR(archive_cmds, $1)=
++  _LT_TAGVAR(archive_expsym_cmds, $1)=
++  _LT_TAGVAR(compiler_needs_object, $1)=no
++  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  _LT_TAGVAR(hardcode_automatic, $1)=no
++  _LT_TAGVAR(hardcode_direct, $1)=no
++  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
++  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++  _LT_TAGVAR(hardcode_libdir_separator, $1)=
++  _LT_TAGVAR(hardcode_minus_L, $1)=no
++  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++  _LT_TAGVAR(inherit_rpath, $1)=no
++  _LT_TAGVAR(link_all_deplibs, $1)=unknown
++  _LT_TAGVAR(module_cmds, $1)=
++  _LT_TAGVAR(module_expsym_cmds, $1)=
++  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
++  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
++  _LT_TAGVAR(thread_safe_flag_spec, $1)=
++  _LT_TAGVAR(whole_archive_flag_spec, $1)=
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  _LT_TAGVAR(include_expsyms, $1)=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  # Exclude shared library initialization/finalization symbols.
++dnl Note also adjust exclude_expsyms for C++ above.
++  extract_expsyms_cmds=
++
++  case $host_os in
++  cygwin* | mingw* | pw32* | cegcc*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  linux* | k*bsd*-gnu | gnu*)
++    _LT_TAGVAR(link_all_deplibs, $1)=no
++    ;;
++  esac
++
++  _LT_TAGVAR(ld_shlibs, $1)=yes
++
++  # On some targets, GNU ld is compatible enough with the native linker
++  # that we're better off using the native interface for both.
++  lt_use_gnu_ld_interface=no
++  if test "$with_gnu_ld" = yes; then
++    case $host_os in
++      aix*)
++	# The AIX port of GNU ld has always aspired to compatibility
++	# with the native linker.  However, as the warning in the GNU ld
++	# block says, versions before 2.19.5* couldn't really create working
++	# shared libraries, regardless of the interface used.
++	case `$LD -v 2>&1` in
++	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++	  *)
++	    lt_use_gnu_ld_interface=yes
++	    ;;
++	esac
++	;;
++      *)
++	lt_use_gnu_ld_interface=yes
++	;;
++    esac
++  fi
++
++  if test "$lt_use_gnu_ld_interface" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    else
++      _LT_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>&1` in
++      *GNU\ gold*) supports_anon_versioning=yes ;;
++      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix[[3-9]]*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++	_LT_TAGVAR(ld_shlibs, $1)=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.19, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
++
++_LT_EOF
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)=''
++        ;;
++      m68k)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        ;;
++      esac
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	# support --undefined.  This deserves some investigation.  FIXME
++	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++	_LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32* | cegcc*)
++      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++      # as there is no search path for DLLs.
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(always_export_symbols, $1)=no
++      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++
++      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	# If the export-symbols file already is a .def file (1st line
++	# is EXPORTS), use it as is; otherwise, prepend...
++	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	  cp $export_symbols $output_objdir/$soname.def;
++	else
++	  echo EXPORTS > $output_objdir/$soname.def;
++	  cat $export_symbols >> $output_objdir/$soname.def;
++	fi~
++	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++	_LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    haiku*)
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    interix[[3-9]]*)
++      _LT_TAGVAR(hardcode_direct, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++      tmp_diet=no
++      if test "$host_os" = linux-dietlibc; then
++	case $cc_basename in
++	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
++	esac
++      fi
++      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++	 && test "$tmp_diet" = no
++      then
++	tmp_addflag=' $pic_flag'
++	tmp_sharedflag='-shared'
++	case $cc_basename,$host_cpu in
++        pgcc*)				# Portland Group C compiler
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag'
++	  ;;
++	pgf77* | pgf90* | pgf95* | pgfortran*)
++					# Portland Group f77 and f90 compilers
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag -Mnomain' ;;
++	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
++	  tmp_addflag=' -i_dynamic' ;;
++	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
++	  tmp_addflag=' -i_dynamic -nofor_main' ;;
++	ifc* | ifort*)			# Intel Fortran compiler
++	  tmp_addflag=' -nofor_main' ;;
++	lf95*)				# Lahey Fortran 8.1
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
++	  tmp_sharedflag='--shared' ;;
++	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++	  tmp_sharedflag='-qmkshrobj'
++	  tmp_addflag= ;;
++	nvcc*)	# Cuda Compiler Driver 2.2
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	  _LT_TAGVAR(compiler_needs_object, $1)=yes
++	  ;;
++	esac
++	case `$CC -V 2>&1 | sed 5q` in
++	*Sun\ C*)			# Sun C 5.9
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	  _LT_TAGVAR(compiler_needs_object, $1)=yes
++	  tmp_sharedflag='-G' ;;
++	*Sun\ F*)			# Sun Fortran 8.3
++	  tmp_sharedflag='-G' ;;
++	esac
++	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++        if test "x$supports_anon_versioning" = xyes; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++	    echo "local: *; };" >> $output_objdir/$libname.ver~
++	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++        fi
++
++	case $cc_basename in
++	xlf* | bgf* | bgxlf* | mpixlf*)
++	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
++	  if test "x$supports_anon_versioning" = xyes; then
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++	      echo "local: *; };" >> $output_objdir/$libname.ver~
++	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++	  fi
++	  ;;
++	esac
++      else
++        _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++	wlarc=
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++	_LT_TAGVAR(ld_shlibs, $1)=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	_LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
++	_LT_TAGVAR(ld_shlibs, $1)=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++	;;
++	*)
++	  # For security reasons, it is highly recommended that you always
++	  # use absolute paths for naming shared libraries, and exclude the
++	  # DT_RUNPATH tag from executables and libraries.  But doing so
++	  # requires that you compile everything twice, which is a pain.
++	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	  else
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	  fi
++	;;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	_LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++    esac
++
++    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
++      runpath_var=
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++      _LT_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(always_export_symbols, $1)=yes
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++	# Neither direct hardcoding nor static linking is supported with a
++	# broken collect2.
++	_LT_TAGVAR(hardcode_direct, $1)=unsupported
++      fi
++      ;;
++
++    aix[[4-9]]*)
++      if test "$host_cpu" = ia64; then
++	# On IA64, the linker does run time linking by default, so we don't
++	# have to do anything special.
++	aix_use_runtimelinking=no
++	exp_sym_flag='-Bexport'
++	no_entry_flag=""
++      else
++	# If we're using GNU nm, then we don't want the "-C" option.
++	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	# Also, AIX nm treats weak defined symbols like other global
++	# defined symbols, whereas GNU nm marks them as "W".
++	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++	else
++	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++	fi
++	aix_use_runtimelinking=no
++
++	# Test if we are trying to use run time linking or normal
++	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
++	# need to do runtime linking.
++	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++	  for ld_flag in $LDFLAGS; do
++	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++	    aix_use_runtimelinking=yes
++	    break
++	  fi
++	  done
++	  ;;
++	esac
++
++	exp_sym_flag='-bexport'
++	no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      _LT_TAGVAR(archive_cmds, $1)=''
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++      if test "$GCC" = yes; then
++	case $host_os in aix4.[[012]]|aix4.[[012]].*)
++	# We only want to do this on AIX 4.2 and lower, the check
++	# below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" &&
++	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++	  then
++	  # We have reworked collect2
++	  :
++	  else
++	  # We have old collect2
++	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
++	  # It fails to find uninstalled libraries when the uninstalled
++	  # path is not listed in the libpath.  Setting hardcode_minus_L
++	  # to unsupported forces relinking
++	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
++	  fi
++	  ;;
++	esac
++	shared_flag='-shared'
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag="$shared_flag "'${wl}-G'
++	fi
++	_LT_TAGVAR(link_all_deplibs, $1)=no
++      else
++	# not using gcc
++	if test "$host_cpu" = ia64; then
++	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++	# chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++	else
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag='${wl}-G'
++	  else
++	    shared_flag='${wl}-bM:SRE'
++	  fi
++	fi
++      fi
++
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      _LT_TAGVAR(always_export_symbols, $1)=yes
++      if test "$aix_use_runtimelinking" = yes; then
++	# Warning - without using the other runtime loading flags (-brtl),
++	# -berok will link without error, but may produce a broken library.
++	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++        # Determine the default libpath from the value encoded in an
++        # empty executable.
++        _LT_SYS_MODULE_PATH_AIX([$1])
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++      else
++	if test "$host_cpu" = ia64; then
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++	else
++	 # Determine the default libpath from the value encoded in an
++	 # empty executable.
++	 _LT_SYS_MODULE_PATH_AIX([$1])
++	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++	  # Warning - without using the other run time loading flags,
++	  # -berok will link without error, but may produce a broken library.
++	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++	  if test "$with_gnu_ld" = yes; then
++	    # We only use this code for GNU lds that support --whole-archive.
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	  else
++	    # Exported symbols can be pulled into shared objects from archives
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	  fi
++	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++	  # This is similar to how AIX traditionally builds its shared libraries.
++	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++	fi
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)=''
++        ;;
++      m68k)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        ;;
++      esac
++      ;;
++
++    bsdi[[45]]*)
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32* | cegcc*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      case $cc_basename in
++      cl*)
++	# Native MSVC
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	_LT_TAGVAR(always_export_symbols, $1)=yes
++	_LT_TAGVAR(file_list_spec, $1)='@'
++	# Tell ltmain to make .lib files, not .a files.
++	libext=lib
++	# Tell ltmain to make .dll files, not .so files.
++	shrext_cmds=".dll"
++	# FIXME: Setting linknames here is a bad hack.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++	  else
++	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++	  fi~
++	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++	  linknames='
++	# The linker will not automatically build a static lib if we build a DLL.
++	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
++	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++	# Don't use ranlib
++	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++	  lt_tool_outputfile="@TOOL_OUTPUT@"~
++	  case $lt_outputfile in
++	    *.exe|*.EXE) ;;
++	    *)
++	      lt_outputfile="$lt_outputfile.exe"
++	      lt_tool_outputfile="$lt_tool_outputfile.exe"
++	      ;;
++	  esac~
++	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++	    $RM "$lt_outputfile.manifest";
++	  fi'
++	;;
++      *)
++	# Assume MSVC wrapper
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	# Tell ltmain to make .lib files, not .a files.
++	libext=lib
++	# Tell ltmain to make .dll files, not .so files.
++	shrext_cmds=".dll"
++	# FIXME: Setting linknames here is a bad hack.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++	# The linker will automatically build a .lib file if we build a DLL.
++	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	# FIXME: Should let the user specify the lib program.
++	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	;;
++      esac
++      ;;
++
++    darwin* | rhapsody*)
++      _LT_DARWIN_LINKER_FEATURES($1)
++      ;;
++
++    dgux*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2.*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
++	_LT_TAGVAR(hardcode_direct, $1)=yes
++	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++	# hardcode_minus_L: Not really in the search PATH,
++	# but as the default location of the library.
++	_LT_TAGVAR(hardcode_minus_L, $1)=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++	case $host_cpu in
++	hppa*64*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      else
++	case $host_cpu in
++	hppa*64*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	m4_if($1, [], [
++	  # Older versions of the 11.00 compiler do not understand -b yet
++	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++	  _LT_LINKER_OPTION([if $CC understands -b],
++	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
++	  ;;
++	esac
++      fi
++      if test "$with_gnu_ld" = no; then
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	case $host_cpu in
++	hppa*64*|ia64*)
++	  _LT_TAGVAR(hardcode_direct, $1)=no
++	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	  ;;
++	*)
++	  _LT_TAGVAR(hardcode_direct, $1)=yes
++	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++	  # hardcode_minus_L: Not really in the search PATH,
++	  # but as the default location of the library.
++	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
++	  ;;
++	esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	# Try to use the -exported_symbol ld option, if it does not
++	# work, assume that -exports_file does not work either and
++	# implicitly export all symbols.
++	# This should be the same for all languages, so no per-tag cache variable.
++	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++	  [lt_cv_irix_exported_symbol],
++	  [save_LDFLAGS="$LDFLAGS"
++	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++	   AC_LINK_IFELSE(
++	     [AC_LANG_SOURCE(
++	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++			      [C++], [[int foo (void) { return 0; }]],
++			      [Fortran 77], [[
++      subroutine foo
++      end]],
++			      [Fortran], [[
++      subroutine foo
++      end]])])],
++	      [lt_cv_irix_exported_symbol=yes],
++	      [lt_cv_irix_exported_symbol=no])
++           LDFLAGS="$save_LDFLAGS"])
++	if test "$lt_cv_irix_exported_symbol" = yes; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++	fi
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(inherit_rpath, $1)=yes
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    newsos6)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *nto* | *qnx*)
++      ;;
++
++    openbsd*)
++      if test -f /usr/libexec/ld.so; then
++	_LT_TAGVAR(hardcode_direct, $1)=yes
++	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++	else
++	  case $host_os in
++	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	     ;;
++	   *)
++	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	     ;;
++	  esac
++	fi
++      else
++	_LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    os2*)
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    osf4* | osf5*)	# as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      else
++	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++
++	# Both c and cxx compiler support -rpath directly
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    solaris*)
++      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
++      if test "$GCC" = yes; then
++	wlarc='${wl}'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++      else
++	case `$CC -V 2>&1` in
++	*"Compilers 5.0"*)
++	  wlarc=''
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++	  ;;
++	*)
++	  wlarc='${wl}'
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++	  ;;
++	esac
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      case $host_os in
++      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++      *)
++	# The compiler driver will combine and reorder linker options,
++	# but understands `-z linker_flag'.  GCC discards it without `$wl',
++	# but is careful enough not to reorder.
++	# Supported since Solaris 2.6 (maybe 2.5.1?)
++	if test "$GCC" = yes; then
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++	else
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++	fi
++	;;
++      esac
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++	# Use $CC to link under sequent, because it throws in some extra .o
++	# files that make .init and .fini sections work.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++	sni)
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
++	;;
++	siemens)
++	  ## LD is ld it makes a PLAMLIB
++	  ## CC just makes a GrossModule.
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++	  _LT_TAGVAR(hardcode_direct, $1)=no
++        ;;
++	motorola)
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
++	;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4.3*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	runpath_var=LD_RUN_PATH
++	hardcode_runpath_var=yes
++	_LT_TAGVAR(ld_shlibs, $1)=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++    esac
++
++    if test x$host_vendor = xsni; then
++      case $host in
++      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
++	;;
++      esac
++    fi
++  fi
++])
++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
++
++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
++_LT_DECL([], [extract_expsyms_cmds], [2],
++    [The commands to extract the exported symbol list from a shared archive])
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++  # Assume -lc should be added
++  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $_LT_TAGVAR(archive_cmds, $1) in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++	[$RM conftest*
++	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++	  soname=conftest
++	  lib=conftest
++	  libobjs=conftest.$ac_objext
++	  deplibs=
++	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++	  compiler_flags=-v
++	  linker_flags=-v
++	  verstring=
++	  output_objdir=.
++	  libname=conftest
++	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++	  _LT_TAGVAR(allow_undefined_flag, $1)=
++	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++	  then
++	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++	  else
++	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++	  fi
++	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++	else
++	  cat conftest.err 1>&5
++	fi
++	$RM conftest*
++	])
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
++    [Whether or not to add -lc for building shared libraries])
++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
++    [enable_shared_with_static_runtimes], [0],
++    [Whether or not to disallow shared libs when runtime libs are static])
++_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
++    [Compiler flag to allow reflexive dlopens])
++_LT_TAGDECL([], [whole_archive_flag_spec], [1],
++    [Compiler flag to generate shared objects directly from archives])
++_LT_TAGDECL([], [compiler_needs_object], [1],
++    [Whether the compiler copes with passing no objects directly])
++_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
++    [Create an old-style archive from a shared archive])
++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
++    [Create a temporary old-style archive to link instead of a shared archive])
++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
++_LT_TAGDECL([], [archive_expsym_cmds], [2])
++_LT_TAGDECL([], [module_cmds], [2],
++    [Commands used to build a loadable module if different from building
++    a shared archive.])
++_LT_TAGDECL([], [module_expsym_cmds], [2])
++_LT_TAGDECL([], [with_gnu_ld], [1],
++    [Whether we are building with GNU ld or not])
++_LT_TAGDECL([], [allow_undefined_flag], [1],
++    [Flag that allows shared libraries with undefined symbols to be built])
++_LT_TAGDECL([], [no_undefined_flag], [1],
++    [Flag that enforces no undefined symbols])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
++    [Flag to hardcode $libdir into a binary during linking.
++    This must work even if $libdir does not exist])
++_LT_TAGDECL([], [hardcode_libdir_separator], [1],
++    [Whether we need a single "-rpath" flag with a separated argument])
++_LT_TAGDECL([], [hardcode_direct], [0],
++    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++    DIR into the resulting binary])
++_LT_TAGDECL([], [hardcode_direct_absolute], [0],
++    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++    DIR into the resulting binary and the resulting library dependency is
++    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
++    library is relocated])
++_LT_TAGDECL([], [hardcode_minus_L], [0],
++    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
++    into the resulting binary])
++_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
++    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
++    into the resulting binary])
++_LT_TAGDECL([], [hardcode_automatic], [0],
++    [Set to "yes" if building a shared library automatically hardcodes DIR
++    into the library and all subsequent libraries and executables linked
++    against it])
++_LT_TAGDECL([], [inherit_rpath], [0],
++    [Set to yes if linker adds runtime paths of dependent libraries
++    to runtime path list])
++_LT_TAGDECL([], [link_all_deplibs], [0],
++    [Whether libtool must link a program against all its dependency libraries])
++_LT_TAGDECL([], [always_export_symbols], [0],
++    [Set to "yes" if exported symbols are required])
++_LT_TAGDECL([], [export_symbols_cmds], [2],
++    [The commands to list exported symbols])
++_LT_TAGDECL([], [exclude_expsyms], [1],
++    [Symbols that should not be listed in the preloaded symbols])
++_LT_TAGDECL([], [include_expsyms], [1],
++    [Symbols that must always be exported])
++_LT_TAGDECL([], [prelink_cmds], [2],
++    [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++    [Commands necessary for finishing linking programs])
++_LT_TAGDECL([], [file_list_spec], [1],
++    [Specify filename containing input files])
++dnl FIXME: Not yet implemented
++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
++dnl    [Compiler flag to generate thread safe objects])
++])# _LT_LINKER_SHLIBS
++
++
++# _LT_LANG_C_CONFIG([TAG])
++# ------------------------
++# Ensure that the configuration variables for a C compiler are suitably
++# defined.  These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_C_CONFIG],
++[m4_require([_LT_DECL_EGREP])dnl
++lt_save_CC="$CC"
++AC_LANG_PUSH(C)
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
++
++_LT_TAG_COMPILER
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++  _LT_COMPILER_NO_RTTI($1)
++  _LT_COMPILER_PIC($1)
++  _LT_COMPILER_C_O($1)
++  _LT_COMPILER_FILE_LOCKS($1)
++  _LT_LINKER_SHLIBS($1)
++  _LT_SYS_DYNAMIC_LINKER($1)
++  _LT_LINKER_HARDCODE_LIBPATH($1)
++  LT_SYS_DLOPEN_SELF
++  _LT_CMD_STRIPLIB
++
++  # Report which library types will actually be built
++  AC_MSG_CHECKING([if libtool supports shared libraries])
++  AC_MSG_RESULT([$can_build_shared])
++
++  AC_MSG_CHECKING([whether to build shared libraries])
++  test "$can_build_shared" = "no" && enable_shared=no
++
++  # On AIX, shared libraries and static libraries use the same namespace, and
++  # are all built from PIC.
++  case $host_os in
++  aix3*)
++    test "$enable_shared" = yes && enable_static=no
++    if test -n "$RANLIB"; then
++      archive_cmds="$archive_cmds~\$RANLIB \$lib"
++      postinstall_cmds='$RANLIB $lib'
++    fi
++    ;;
++
++  aix[[4-9]]*)
++    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++      test "$enable_shared" = yes && enable_static=no
++    fi
++    ;;
++  esac
++  AC_MSG_RESULT([$enable_shared])
++
++  AC_MSG_CHECKING([whether to build static libraries])
++  # Make sure either enable_shared or enable_static is yes.
++  test "$enable_shared" = yes || enable_static=yes
++  AC_MSG_RESULT([$enable_static])
++
++  _LT_CONFIG($1)
++fi
++AC_LANG_POP
++CC="$lt_save_CC"
++])# _LT_LANG_C_CONFIG
++
++
++# _LT_LANG_CXX_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a C++ compiler are suitably
++# defined.  These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_CXX_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++    (test "X$CXX" != "Xg++"))) ; then
++  AC_PROG_CXXCPP
++else
++  _lt_caught_CXX_error=yes
++fi
++
++AC_LANG_PUSH(C++)
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(compiler_needs_object, $1)=no
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for C++ test sources.
++ac_ext=cpp
++
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the CXX compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_caught_CXX_error" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="int some_variable = 0;"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC=$CC
++  lt_save_CFLAGS=$CFLAGS
++  lt_save_LD=$LD
++  lt_save_GCC=$GCC
++  GCC=$GXX
++  lt_save_with_gnu_ld=$with_gnu_ld
++  lt_save_path_LD=$lt_cv_path_LD
++  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++  else
++    $as_unset lt_cv_prog_gnu_ld
++  fi
++  if test -n "${lt_cv_path_LDCXX+set}"; then
++    lt_cv_path_LD=$lt_cv_path_LDCXX
++  else
++    $as_unset lt_cv_path_LD
++  fi
++  test -z "${LDCXX+set}" || LD=$LDCXX
++  CC=${CXX-"c++"}
++  CFLAGS=$CXXFLAGS
++  compiler=$CC
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++
++  if test -n "$compiler"; then
++    # We don't want -fno-exception when compiling C++ code, so set the
++    # no_builtin_flag separately
++    if test "$GXX" = yes; then
++      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++    else
++      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++    fi
++
++    if test "$GXX" = yes; then
++      # Set up default GNU C++ configuration
++
++      LT_PATH_LD
++
++      # Check if GNU C++ uses GNU ld as the underlying linker, since the
++      # archiving commands below assume that GNU ld is being used.
++      if test "$with_gnu_ld" = yes; then
++        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++        # If archive_cmds runs LD, not CC, wlarc should be empty
++        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++        #     investigate it a little bit more. (MM)
++        wlarc='${wl}'
++
++        # ancient GNU ld didn't support --whole-archive et. al.
++        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
++	  $GREP 'no-whole-archive' > /dev/null; then
++          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++        else
++          _LT_TAGVAR(whole_archive_flag_spec, $1)=
++        fi
++      else
++        with_gnu_ld=no
++        wlarc=
++
++        # A generic and very simple default shared library creation
++        # command for GNU C++ for the case where it uses the native
++        # linker, instead of GNU ld.  If possible, this setting should
++        # overridden to take advantage of the native linker features on
++        # the platform it is being used on.
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++      fi
++
++      # Commands to make compiler produce verbose output that lists
++      # what "hidden" libraries, object files and flags are used when
++      # linking a shared library.
++      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++
++    else
++      GXX=no
++      with_gnu_ld=no
++      wlarc=
++    fi
++
++    # PORTME: fill in a description of your system's C++ link characteristics
++    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++    _LT_TAGVAR(ld_shlibs, $1)=yes
++    case $host_os in
++      aix3*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++      aix[[4-9]]*)
++        if test "$host_cpu" = ia64; then
++          # On IA64, the linker does run time linking by default, so we don't
++          # have to do anything special.
++          aix_use_runtimelinking=no
++          exp_sym_flag='-Bexport'
++          no_entry_flag=""
++        else
++          aix_use_runtimelinking=no
++
++          # Test if we are trying to use run time linking or normal
++          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++          # need to do runtime linking.
++          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++	    for ld_flag in $LDFLAGS; do
++	      case $ld_flag in
++	      *-brtl*)
++	        aix_use_runtimelinking=yes
++	        break
++	        ;;
++	      esac
++	    done
++	    ;;
++          esac
++
++          exp_sym_flag='-bexport'
++          no_entry_flag='-bnoentry'
++        fi
++
++        # When large executables or shared objects are built, AIX ld can
++        # have problems creating the table of contents.  If linking a library
++        # or program results in "error TOC overflow" add -mminimal-toc to
++        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++        _LT_TAGVAR(archive_cmds, $1)=''
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++        _LT_TAGVAR(link_all_deplibs, $1)=yes
++        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++        if test "$GXX" = yes; then
++          case $host_os in aix4.[[012]]|aix4.[[012]].*)
++          # We only want to do this on AIX 4.2 and lower, the check
++          # below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" &&
++	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++	  then
++	    # We have reworked collect2
++	    :
++	  else
++	    # We have old collect2
++	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
++	    # It fails to find uninstalled libraries when the uninstalled
++	    # path is not listed in the libpath.  Setting hardcode_minus_L
++	    # to unsupported forces relinking
++	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
++	  fi
++          esac
++          shared_flag='-shared'
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag="$shared_flag "'${wl}-G'
++	  fi
++        else
++          # not using gcc
++          if test "$host_cpu" = ia64; then
++	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++	  # chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++          else
++	    if test "$aix_use_runtimelinking" = yes; then
++	      shared_flag='${wl}-G'
++	    else
++	      shared_flag='${wl}-bM:SRE'
++	    fi
++          fi
++        fi
++
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++        # It seems that -bexpall does not export symbols beginning with
++        # underscore (_), so it is better to generate a list of symbols to
++	# export.
++        _LT_TAGVAR(always_export_symbols, $1)=yes
++        if test "$aix_use_runtimelinking" = yes; then
++          # Warning - without using the other runtime loading flags (-brtl),
++          # -berok will link without error, but may produce a broken library.
++          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++          # Determine the default libpath from the value encoded in an empty
++          # executable.
++          _LT_SYS_MODULE_PATH_AIX([$1])
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++        else
++          if test "$host_cpu" = ia64; then
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++          else
++	    # Determine the default libpath from the value encoded in an
++	    # empty executable.
++	    _LT_SYS_MODULE_PATH_AIX([$1])
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++	    # Warning - without using the other run time loading flags,
++	    # -berok will link without error, but may produce a broken library.
++	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++	    if test "$with_gnu_ld" = yes; then
++	      # We only use this code for GNU lds that support --whole-archive.
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	    else
++	      # Exported symbols can be pulled into shared objects from archives
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	    fi
++	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++	    # This is similar to how AIX traditionally builds its shared
++	    # libraries.
++	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++          fi
++        fi
++        ;;
++
++      beos*)
++	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	  # support --undefined.  This deserves some investigation.  FIXME
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	else
++	  _LT_TAGVAR(ld_shlibs, $1)=no
++	fi
++	;;
++
++      chorus*)
++        case $cc_basename in
++          *)
++	  # FIXME: insert proper C++ library support
++	  _LT_TAGVAR(ld_shlibs, $1)=no
++	  ;;
++        esac
++        ;;
++
++      cygwin* | mingw* | pw32* | cegcc*)
++	case $GXX,$cc_basename in
++	,cl* | no,cl*)
++	  # Native MSVC
++	  # hardcode_libdir_flag_spec is actually meaningless, as there is
++	  # no search path for DLLs.
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	  _LT_TAGVAR(always_export_symbols, $1)=yes
++	  _LT_TAGVAR(file_list_spec, $1)='@'
++	  # Tell ltmain to make .lib files, not .a files.
++	  libext=lib
++	  # Tell ltmain to make .dll files, not .so files.
++	  shrext_cmds=".dll"
++	  # FIXME: Setting linknames here is a bad hack.
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++	    else
++	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++	    fi~
++	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++	    linknames='
++	  # The linker will not automatically build a static lib if we build a DLL.
++	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	  # Don't use ranlib
++	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++	    lt_tool_outputfile="@TOOL_OUTPUT@"~
++	    case $lt_outputfile in
++	      *.exe|*.EXE) ;;
++	      *)
++		lt_outputfile="$lt_outputfile.exe"
++		lt_tool_outputfile="$lt_tool_outputfile.exe"
++		;;
++	    esac~
++	    func_to_tool_file "$lt_outputfile"~
++	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++	      $RM "$lt_outputfile.manifest";
++	    fi'
++	  ;;
++	*)
++	  # g++
++	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++	  # as there is no search path for DLLs.
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	  _LT_TAGVAR(always_export_symbols, $1)=no
++	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	    # If the export-symbols file already is a .def file (1st line
++	    # is EXPORTS), use it as is; otherwise, prepend...
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	      cp $export_symbols $output_objdir/$soname.def;
++	    else
++	      echo EXPORTS > $output_objdir/$soname.def;
++	      cat $export_symbols >> $output_objdir/$soname.def;
++	    fi~
++	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	  else
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	  fi
++	  ;;
++	esac
++	;;
++      darwin* | rhapsody*)
++        _LT_DARWIN_LINKER_FEATURES($1)
++	;;
++
++      dgux*)
++        case $cc_basename in
++          ec++*)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          ghcx*)
++	    # Green Hills C++ Compiler
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          *)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++        esac
++        ;;
++
++      freebsd2.*)
++        # C++ shared libraries reported to be fairly broken before
++	# switch to ELF
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      freebsd-elf*)
++        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++        ;;
++
++      freebsd* | dragonfly*)
++        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++        # conventions
++        _LT_TAGVAR(ld_shlibs, $1)=yes
++        ;;
++
++      haiku*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++        _LT_TAGVAR(link_all_deplibs, $1)=yes
++        ;;
++
++      hpux9*)
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++				             # but as the default
++				             # location of the library.
++
++        case $cc_basename in
++          CC*)
++            # FIXME: insert proper C++ library support
++            _LT_TAGVAR(ld_shlibs, $1)=no
++            ;;
++          aCC*)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++            # Commands to make compiler produce verbose output that lists
++            # what "hidden" libraries, object files and flags are used when
++            # linking a shared library.
++            #
++            # There doesn't appear to be a way to prevent this compiler from
++            # explicitly linking system object files so we need to strip them
++            # from the output so that they don't get included in the library
++            # dependencies.
++            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++            ;;
++          *)
++            if test "$GXX" = yes; then
++              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++            else
++              # FIXME: insert proper C++ library support
++              _LT_TAGVAR(ld_shlibs, $1)=no
++            fi
++            ;;
++        esac
++        ;;
++
++      hpux10*|hpux11*)
++        if test $with_gnu_ld = no; then
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++          case $host_cpu in
++            hppa*64*|ia64*)
++              ;;
++            *)
++	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++              ;;
++          esac
++        fi
++        case $host_cpu in
++          hppa*64*|ia64*)
++            _LT_TAGVAR(hardcode_direct, $1)=no
++            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++            ;;
++          *)
++            _LT_TAGVAR(hardcode_direct, $1)=yes
++            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++					         # but as the default
++					         # location of the library.
++            ;;
++        esac
++
++        case $cc_basename in
++          CC*)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          aCC*)
++	    case $host_cpu in
++	      hppa*64*)
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	        ;;
++	      ia64*)
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	        ;;
++	      *)
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	        ;;
++	    esac
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    #
++	    # There doesn't appear to be a way to prevent this compiler from
++	    # explicitly linking system object files so we need to strip them
++	    # from the output so that they don't get included in the library
++	    # dependencies.
++	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++	    ;;
++          *)
++	    if test "$GXX" = yes; then
++	      if test $with_gnu_ld = no; then
++	        case $host_cpu in
++	          hppa*64*)
++	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	            ;;
++	          ia64*)
++	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	            ;;
++	          *)
++	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	            ;;
++	        esac
++	      fi
++	    else
++	      # FIXME: insert proper C++ library support
++	      _LT_TAGVAR(ld_shlibs, $1)=no
++	    fi
++	    ;;
++        esac
++        ;;
++
++      interix[[3-9]]*)
++	_LT_TAGVAR(hardcode_direct, $1)=no
++	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++	# Instead, shared libraries are loaded at an image base (0x10000000 by
++	# default) and relocated if they conflict, which is a slow very memory
++	# consuming and fragmenting process.  To avoid this, we pick a random,
++	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++	;;
++      irix5* | irix6*)
++        case $cc_basename in
++          CC*)
++	    # SGI C++
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++
++	    # Archives containing C++ object files must be created using
++	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
++	    # necessary to make sure instantiated templates are included
++	    # in the archive.
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++	    ;;
++          *)
++	    if test "$GXX" = yes; then
++	      if test "$with_gnu_ld" = no; then
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	      else
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
++	      fi
++	    fi
++	    _LT_TAGVAR(link_all_deplibs, $1)=yes
++	    ;;
++        esac
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++        _LT_TAGVAR(inherit_rpath, $1)=yes
++        ;;
++
++      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
++        case $cc_basename in
++          KCC*)
++	    # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	    # KCC will only create a shared library if the output file
++	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
++	    # to its proper name (with version) after linking.
++	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    #
++	    # There doesn't appear to be a way to prevent this compiler from
++	    # explicitly linking system object files so we need to strip them
++	    # from the output so that they don't get included in the library
++	    # dependencies.
++	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++	    # Archives containing C++ object files must be created using
++	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++	    ;;
++	  icpc* | ecpc* )
++	    # Intel C++
++	    with_gnu_ld=yes
++	    # version 8.0 and above of icpc choke on multiply defined symbols
++	    # if we add $predep_objects and $postdep_objects, however 7.1 and
++	    # earlier do not add the objects themselves.
++	    case `$CC -V 2>&1` in
++	      *"Version 7."*)
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++		;;
++	      *)  # Version 8.0 or newer
++	        tmp_idyn=
++	        case $host_cpu in
++		  ia64*) tmp_idyn=' -i_dynamic';;
++		esac
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++		;;
++	    esac
++	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	    ;;
++          pgCC* | pgcpp*)
++            # Portland Group C++ compiler
++	    case `$CC -V` in
++	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
++	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
++		rm -rf $tpldir~
++		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
++		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
++	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
++		rm -rf $tpldir~
++		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
++		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
++		$RANLIB $oldlib'
++	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
++		rm -rf $tpldir~
++		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
++		rm -rf $tpldir~
++		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++	      ;;
++	    *) # Version 6 and above use weak symbols
++	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++	      ;;
++	    esac
++
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++            ;;
++	  cxx*)
++	    # Compaq C++
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++
++	    runpath_var=LD_RUN_PATH
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    #
++	    # There doesn't appear to be a way to prevent this compiler from
++	    # explicitly linking system object files so we need to strip them
++	    # from the output so that they don't get included in the library
++	    # dependencies.
++	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
++	    ;;
++	  xl* | mpixl* | bgxl*)
++	    # IBM XL 8.0 on PPC, with GNU ld
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	    if test "x$supports_anon_versioning" = xyes; then
++	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++		echo "local: *; };" >> $output_objdir/$libname.ver~
++		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++	    fi
++	    ;;
++	  *)
++	    case `$CC -V 2>&1 | sed 5q` in
++	    *Sun\ C*)
++	      # Sun C++ 5.9
++	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	      _LT_TAGVAR(compiler_needs_object, $1)=yes
++
++	      # Not sure whether something based on
++	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++	      # would be better.
++	      output_verbose_link_cmd='func_echo_all'
++
++	      # Archives containing C++ object files must be created using
++	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
++	      # necessary to make sure instantiated templates are included
++	      # in the archive.
++	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++	      ;;
++	    esac
++	    ;;
++	esac
++	;;
++
++      lynxos*)
++        # FIXME: insert proper C++ library support
++	_LT_TAGVAR(ld_shlibs, $1)=no
++	;;
++
++      m88k*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++	;;
++
++      mvs*)
++        case $cc_basename in
++          cxx*)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++	  *)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++	esac
++	;;
++
++      netbsd*)
++        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++	  wlarc=
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	  _LT_TAGVAR(hardcode_direct, $1)=yes
++	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	fi
++	# Workaround some broken pre-1.5 toolchains
++	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++	;;
++
++      *nto* | *qnx*)
++        _LT_TAGVAR(ld_shlibs, $1)=yes
++	;;
++
++      openbsd2*)
++        # C++ shared libraries are fairly broken
++	_LT_TAGVAR(ld_shlibs, $1)=no
++	;;
++
++      openbsd*)
++	if test -f /usr/libexec/ld.so; then
++	  _LT_TAGVAR(hardcode_direct, $1)=yes
++	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++	  fi
++	  output_verbose_link_cmd=func_echo_all
++	else
++	  _LT_TAGVAR(ld_shlibs, $1)=no
++	fi
++	;;
++
++      osf3* | osf4* | osf5*)
++        case $cc_basename in
++          KCC*)
++	    # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	    # KCC will only create a shared library if the output file
++	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
++	    # to its proper name (with version) after linking.
++	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	    # Archives containing C++ object files must be created using
++	    # the KAI C++ compiler.
++	    case $host in
++	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
++	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
++	    esac
++	    ;;
++          RCC*)
++	    # Rational C++ 2.4.1
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          cxx*)
++	    case $host in
++	      osf3*)
++	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++		;;
++	      *)
++	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++	          echo "-hidden">> $lib.exp~
++	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
++	          $RM $lib.exp'
++	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++		;;
++	    esac
++
++	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    #
++	    # There doesn't appear to be a way to prevent this compiler from
++	    # explicitly linking system object files so we need to strip them
++	    # from the output so that they don't get included in the library
++	    # dependencies.
++	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++	    ;;
++	  *)
++	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	      case $host in
++	        osf3*)
++	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++		  ;;
++	        *)
++	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++		  ;;
++	      esac
++
++	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	      # Commands to make compiler produce verbose output that lists
++	      # what "hidden" libraries, object files and flags are used when
++	      # linking a shared library.
++	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++
++	    else
++	      # FIXME: insert proper C++ library support
++	      _LT_TAGVAR(ld_shlibs, $1)=no
++	    fi
++	    ;;
++        esac
++        ;;
++
++      psos*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      sunos4*)
++        case $cc_basename in
++          CC*)
++	    # Sun C++ 4.x
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          lcc*)
++	    # Lucid
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          *)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++        esac
++        ;;
++
++      solaris*)
++        case $cc_basename in
++          CC* | sunCC*)
++	    # Sun C++ 4.2, 5.x and Centerline C++
++            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
++	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	    case $host_os in
++	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++	      *)
++		# The compiler driver will combine and reorder linker options,
++		# but understands `-z linker_flag'.
++	        # Supported since Solaris 2.6 (maybe 2.5.1?)
++		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++	        ;;
++	    esac
++	    _LT_TAGVAR(link_all_deplibs, $1)=yes
++
++	    output_verbose_link_cmd='func_echo_all'
++
++	    # Archives containing C++ object files must be created using
++	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
++	    # necessary to make sure instantiated templates are included
++	    # in the archive.
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++	    ;;
++          gcx*)
++	    # Green Hills C++ Compiler
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++
++	    # The C++ compiler must be used to create the archive.
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++	    ;;
++          *)
++	    # GNU C++ compiler with Solaris linker
++	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++	        # Commands to make compiler produce verbose output that lists
++	        # what "hidden" libraries, object files and flags are used when
++	        # linking a shared library.
++	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++	      else
++	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
++	        # platform.
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++	        # Commands to make compiler produce verbose output that lists
++	        # what "hidden" libraries, object files and flags are used when
++	        # linking a shared library.
++	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++	      fi
++
++	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++	      case $host_os in
++		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++		*)
++		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++		  ;;
++	      esac
++	    fi
++	    ;;
++        esac
++        ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var='LD_RUN_PATH'
++
++      case $cc_basename in
++        CC*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++      esac
++      ;;
++
++      sysv5* | sco3.2v5* | sco5v6*)
++	# Note: We can NOT use -z defs as we might desire, because we do not
++	# link with -lc, and that would cause any symbols used from libc to
++	# always be unresolved, which means just about no library would
++	# ever link correctly.  If we're not using GNU ld we use -z text
++	# though, which does catch some bad symbols but isn't as heavy-handed
++	# as -z defs.
++	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++	_LT_TAGVAR(link_all_deplibs, $1)=yes
++	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++	runpath_var='LD_RUN_PATH'
++
++	case $cc_basename in
++          CC*)
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
++	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++	      '"$_LT_TAGVAR(reload_cmds, $1)"
++	    ;;
++	  *)
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	    ;;
++	esac
++      ;;
++
++      tandem*)
++        case $cc_basename in
++          NCC*)
++	    # NonStop-UX NCC 3.20
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++          *)
++	    # FIXME: insert proper C++ library support
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	    ;;
++        esac
++        ;;
++
++      vxworks*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      *)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++    esac
++
++    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++    _LT_TAGVAR(GCC, $1)="$GXX"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_SYS_HIDDEN_LIBDEPS($1)
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  CC=$lt_save_CC
++  CFLAGS=$lt_save_CFLAGS
++  LDCXX=$LD
++  LD=$lt_save_LD
++  GCC=$lt_save_GCC
++  with_gnu_ld=$lt_save_with_gnu_ld
++  lt_cv_path_LDCXX=$lt_cv_path_LD
++  lt_cv_path_LD=$lt_save_path_LD
++  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++fi # test "$_lt_caught_CXX_error" != yes
++
++AC_LANG_POP
++])# _LT_LANG_CXX_CONFIG
++
++
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++  case ${2} in
++  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++  esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
++# ---------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
++# Dependencies to place before and after the object being linked:
++_LT_TAGVAR(predep_objects, $1)=
++_LT_TAGVAR(postdep_objects, $1)=
++_LT_TAGVAR(predeps, $1)=
++_LT_TAGVAR(postdeps, $1)=
++_LT_TAGVAR(compiler_lib_search_path, $1)=
++
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library.  It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
++int a;
++void foo (void) { a = 0; }
++_LT_EOF
++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
++class Foo
++{
++public:
++  Foo (void) { a = 0; }
++private:
++  int a;
++};
++_LT_EOF
++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
++      subroutine foo
++      implicit none
++      integer*4 a
++      a=0
++      return
++      end
++_LT_EOF
++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
++      subroutine foo
++      implicit none
++      integer a
++      a=0
++      return
++      end
++_LT_EOF
++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
++public class foo {
++  private int a;
++  public void bar (void) {
++    a = 0;
++  }
++};
++_LT_EOF
++], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
++package foo
++func foo() {
++}
++_LT_EOF
++])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
++esac
++
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++  # Parse the compiler output and extract the necessary
++  # objects, libraries and library flags.
++
++  # Sentinel used to keep track of whether or not we are before
++  # the conftest object file.
++  pre_test_object_deps_done=no
++
++  for p in `eval "$output_verbose_link_cmd"`; do
++    case ${prev}${p} in
++
++    -L* | -R* | -l*)
++       # Some compilers place space between "-{L,R}" and the path.
++       # Remove the space.
++       if test $p = "-L" ||
++          test $p = "-R"; then
++	 prev=$p
++	 continue
++       fi
++
++       # Expand the sysroot to ease extracting the directories later.
++       if test -z "$prev"; then
++         case $p in
++         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++         esac
++       fi
++       case $p in
++       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++       esac
++       if test "$pre_test_object_deps_done" = no; then
++	 case ${prev} in
++	 -L | -R)
++	   # Internal compiler library paths should come after those
++	   # provided the user.  The postdeps already come after the
++	   # user supplied libs so there is no need to process them.
++	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
++	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++	   else
++	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++	   fi
++	   ;;
++	 # The "-l" case would never come before the object being
++	 # linked, so don't bother handling this case.
++	 esac
++       else
++	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
++	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
++	 else
++	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
++	 fi
++       fi
++       prev=
++       ;;
++
++    *.lto.$objext) ;; # Ignore GCC LTO objects
++    *.$objext)
++       # This assumes that the test object file only shows up
++       # once in the compiler output.
++       if test "$p" = "conftest.$objext"; then
++	 pre_test_object_deps_done=yes
++	 continue
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
++	   _LT_TAGVAR(predep_objects, $1)="$p"
++	 else
++	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
++	 fi
++       else
++	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
++	   _LT_TAGVAR(postdep_objects, $1)="$p"
++	 else
++	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
++	 fi
++       fi
++       ;;
++
++    *) ;; # Ignore the rest.
++
++    esac
++  done
++
++  # Clean up.
++  rm -f a.out a.exe
++else
++  echo "libtool.m4: error: problem compiling $1 test program"
++fi
++
++$RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
++
++# PORTME: override above test on systems where it is broken
++m4_if([$1], [CXX],
++[case $host_os in
++interix[[3-9]]*)
++  # Interix 3.5 installs completely hosed .la files for C++, so rather than
++  # hack all around it, let's just trust "g++" to DTRT.
++  _LT_TAGVAR(predep_objects,$1)=
++  _LT_TAGVAR(postdep_objects,$1)=
++  _LT_TAGVAR(postdeps,$1)=
++  ;;
++
++linux*)
++  case `$CC -V 2>&1 | sed 5q` in
++  *Sun\ C*)
++    # Sun C++ 5.9
++
++    # The more standards-conforming stlport4 library is
++    # incompatible with the Cstd library. Avoid specifying
++    # it if it's in CXXFLAGS. Ignore libCrun as
++    # -library=stlport4 depends on it.
++    case " $CXX $CXXFLAGS " in
++    *" -library=stlport4 "*)
++      solaris_use_stlport4=yes
++      ;;
++    esac
++
++    if test "$solaris_use_stlport4" != yes; then
++      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++    fi
++    ;;
++  esac
++  ;;
++
++solaris*)
++  case $cc_basename in
++  CC* | sunCC*)
++    # The more standards-conforming stlport4 library is
++    # incompatible with the Cstd library. Avoid specifying
++    # it if it's in CXXFLAGS. Ignore libCrun as
++    # -library=stlport4 depends on it.
++    case " $CXX $CXXFLAGS " in
++    *" -library=stlport4 "*)
++      solaris_use_stlport4=yes
++      ;;
++    esac
++
++    # Adding this requires a known-good setup of shared libraries for
++    # Sun compiler versions before 5.6, else PIC objects from an old
++    # archive will be linked into the output, leading to subtle bugs.
++    if test "$solaris_use_stlport4" != yes; then
++      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++    fi
++    ;;
++  esac
++  ;;
++esac
++])
++
++case " $_LT_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
++fi
++_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
++    [The directories searched by this compiler when creating a shared library])
++_LT_TAGDECL([], [predep_objects], [1],
++    [Dependencies to place before and after the objects being linked to
++    create a shared library])
++_LT_TAGDECL([], [postdep_objects], [1])
++_LT_TAGDECL([], [predeps], [1])
++_LT_TAGDECL([], [postdeps], [1])
++_LT_TAGDECL([], [compiler_lib_search_path], [1],
++    [The library search path used internally by the compiler when linking
++    a shared library])
++])# _LT_SYS_HIDDEN_LIBDEPS
++
++
++# _LT_LANG_F77_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a Fortran 77 compiler are
++# suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_F77_CONFIG],
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++  _lt_disable_F77=yes
++fi
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for f77 test sources.
++ac_ext=f
++
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the F77 compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_F77" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="\
++      subroutine t
++      return
++      end
++"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code="\
++      program t
++      end
++"
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC="$CC"
++  lt_save_GCC=$GCC
++  lt_save_CFLAGS=$CFLAGS
++  CC=${F77-"f77"}
++  CFLAGS=$FFLAGS
++  compiler=$CC
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++  GCC=$G77
++  if test -n "$compiler"; then
++    AC_MSG_CHECKING([if libtool supports shared libraries])
++    AC_MSG_RESULT([$can_build_shared])
++
++    AC_MSG_CHECKING([whether to build shared libraries])
++    test "$can_build_shared" = "no" && enable_shared=no
++
++    # On AIX, shared libraries and static libraries use the same namespace, and
++    # are all built from PIC.
++    case $host_os in
++      aix3*)
++        test "$enable_shared" = yes && enable_static=no
++        if test -n "$RANLIB"; then
++          archive_cmds="$archive_cmds~\$RANLIB \$lib"
++          postinstall_cmds='$RANLIB $lib'
++        fi
++        ;;
++      aix[[4-9]]*)
++	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++	  test "$enable_shared" = yes && enable_static=no
++	fi
++        ;;
++    esac
++    AC_MSG_RESULT([$enable_shared])
++
++    AC_MSG_CHECKING([whether to build static libraries])
++    # Make sure either enable_shared or enable_static is yes.
++    test "$enable_shared" = yes || enable_static=yes
++    AC_MSG_RESULT([$enable_static])
++
++    _LT_TAGVAR(GCC, $1)="$G77"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  GCC=$lt_save_GCC
++  CC="$lt_save_CC"
++  CFLAGS="$lt_save_CFLAGS"
++fi # test "$_lt_disable_F77" != yes
++
++AC_LANG_POP
++])# _LT_LANG_F77_CONFIG
++
++
++# _LT_LANG_FC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for a Fortran compiler are
++# suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_FC_CONFIG],
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++  _lt_disable_FC=yes
++fi
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for fc test sources.
++ac_ext=${ac_fc_srcext-f}
++
++# Object file extension for compiled fc test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the FC compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_FC" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="\
++      subroutine t
++      return
++      end
++"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code="\
++      program t
++      end
++"
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC="$CC"
++  lt_save_GCC=$GCC
++  lt_save_CFLAGS=$CFLAGS
++  CC=${FC-"f95"}
++  CFLAGS=$FCFLAGS
++  compiler=$CC
++  GCC=$ac_cv_fc_compiler_gnu
++
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++
++  if test -n "$compiler"; then
++    AC_MSG_CHECKING([if libtool supports shared libraries])
++    AC_MSG_RESULT([$can_build_shared])
++
++    AC_MSG_CHECKING([whether to build shared libraries])
++    test "$can_build_shared" = "no" && enable_shared=no
++
++    # On AIX, shared libraries and static libraries use the same namespace, and
++    # are all built from PIC.
++    case $host_os in
++      aix3*)
++        test "$enable_shared" = yes && enable_static=no
++        if test -n "$RANLIB"; then
++          archive_cmds="$archive_cmds~\$RANLIB \$lib"
++          postinstall_cmds='$RANLIB $lib'
++        fi
++        ;;
++      aix[[4-9]]*)
++	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++	  test "$enable_shared" = yes && enable_static=no
++	fi
++        ;;
++    esac
++    AC_MSG_RESULT([$enable_shared])
++
++    AC_MSG_CHECKING([whether to build static libraries])
++    # Make sure either enable_shared or enable_static is yes.
++    test "$enable_shared" = yes || enable_static=yes
++    AC_MSG_RESULT([$enable_static])
++
++    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_SYS_HIDDEN_LIBDEPS($1)
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  GCC=$lt_save_GCC
++  CC=$lt_save_CC
++  CFLAGS=$lt_save_CFLAGS
++fi # test "$_lt_disable_FC" != yes
++
++AC_LANG_POP
++])# _LT_LANG_FC_CONFIG
++
++
++# _LT_LANG_GCJ_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Java Compiler compiler
++# are suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GCJ_CONFIG],
++[AC_REQUIRE([LT_PROG_GCJ])dnl
++AC_LANG_SAVE
++
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++  _LT_COMPILER_NO_RTTI($1)
++  _LT_COMPILER_PIC($1)
++  _LT_COMPILER_C_O($1)
++  _LT_COMPILER_FILE_LOCKS($1)
++  _LT_LINKER_SHLIBS($1)
++  _LT_LINKER_HARDCODE_LIBPATH($1)
++
++  _LT_CONFIG($1)
++fi
++
++AC_LANG_RESTORE
++
++GCC=$lt_save_GCC
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_GCJ_CONFIG
++
++
++# _LT_LANG_GO_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Go compiler
++# are suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GO_CONFIG],
++[AC_REQUIRE([LT_PROG_GO])dnl
++AC_LANG_SAVE
++
++# Source file extension for Go test sources.
++ac_ext=go
++
++# Object file extension for compiled Go test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="package main; func main() { }"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='package main; func main() { }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GOC-"gccgo"}
++CFLAGS=$GOFLAGS
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# Go did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++  _LT_COMPILER_NO_RTTI($1)
++  _LT_COMPILER_PIC($1)
++  _LT_COMPILER_C_O($1)
++  _LT_COMPILER_FILE_LOCKS($1)
++  _LT_LINKER_SHLIBS($1)
++  _LT_LINKER_HARDCODE_LIBPATH($1)
++
++  _LT_CONFIG($1)
++fi
++
++AC_LANG_RESTORE
++
++GCC=$lt_save_GCC
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_GO_CONFIG
++
++
++# _LT_LANG_RC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for the Windows resource compiler
++# are suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_RC_CONFIG],
++[AC_REQUIRE([LT_PROG_RC])dnl
++AC_LANG_SAVE
++
++# Source file extension for RC test sources.
++ac_ext=rc
++
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=
++CC=${RC-"windres"}
++CFLAGS=
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++
++if test -n "$compiler"; then
++  :
++  _LT_CONFIG($1)
++fi
++
++GCC=$lt_save_GCC
++AC_LANG_RESTORE
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_RC_CONFIG
++
++
++# LT_PROG_GCJ
++# -----------
++AC_DEFUN([LT_PROG_GCJ],
++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
++  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
++    [AC_CHECK_TOOL(GCJ, gcj,)
++      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++      AC_SUBST(GCJFLAGS)])])[]dnl
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
++
++
++# LT_PROG_GO
++# ----------
++AC_DEFUN([LT_PROG_GO],
++[AC_CHECK_TOOL(GOC, gccgo,)
++])
++
++
++# LT_PROG_RC
++# ----------
++AC_DEFUN([LT_PROG_RC],
++[AC_CHECK_TOOL(RC, windres,)
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_RC], [])
++
++
++# _LT_DECL_EGREP
++# --------------
++# If we don't have a new enough Autoconf to choose the best grep
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_EGREP],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_REQUIRE([AC_PROG_FGREP])dnl
++test -z "$GREP" && GREP=grep
++_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
++_LT_DECL([], [EGREP], [1], [An ERE matcher])
++_LT_DECL([], [FGREP], [1], [A literal string matcher])
++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
++AC_SUBST([GREP])
++])
++
++
++# _LT_DECL_OBJDUMP
++# --------------
++# If we don't have a new enough Autoconf to choose the best objdump
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_OBJDUMP],
++[AC_CHECK_TOOL(OBJDUMP, objdump, false)
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
++AC_SUBST([OBJDUMP])
++])
++
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
++
++# _LT_DECL_SED
++# ------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible.  Prefer GNU sed if found.
++m4_defun([_LT_DECL_SED],
++[AC_PROG_SED
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
++    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
++])# _LT_DECL_SED
++
++m4_ifndef([AC_PROG_SED], [
++############################################################
++# NOTE: This macro has been submitted for inclusion into   #
++#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
++#  a released version of Autoconf we should remove this    #
++#  macro and use it instead.                               #
++############################################################
++
++m4_defun([AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for lt_ac_prog in sed gsed; do
++    for ac_exec_ext in '' $ac_executable_extensions; do
++      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++      fi
++    done
++  done
++done
++IFS=$as_save_IFS
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++  test ! -f $lt_ac_sed && continue
++  cat /dev/null > conftest.in
++  lt_ac_count=0
++  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++  # Check for GNU sed and select it if it is found.
++  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++    lt_cv_path_SED=$lt_ac_sed
++    break
++  fi
++  while true; do
++    cat conftest.in conftest.in >conftest.tmp
++    mv conftest.tmp conftest.in
++    cp conftest.in conftest.nl
++    echo >>conftest.nl
++    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++    cmp -s conftest.out conftest.nl || break
++    # 10000 chars as input seems more than enough
++    test $lt_ac_count -gt 10 && break
++    lt_ac_count=`expr $lt_ac_count + 1`
++    if test $lt_ac_count -gt $lt_ac_max; then
++      lt_ac_max=$lt_ac_count
++      lt_cv_path_SED=$lt_ac_sed
++    fi
++  done
++done
++])
++SED=$lt_cv_path_SED
++AC_SUBST([SED])
++AC_MSG_RESULT([$SED])
++])#AC_PROG_SED
++])#m4_ifndef
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_SED], [])
++
++
++# _LT_CHECK_SHELL_FEATURES
++# ------------------------
++# Find out whether the shell is Bourne or XSI compatible,
++# or has some other useful features.
++m4_defun([_LT_CHECK_SHELL_FEATURES],
++[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++      = c,a/b,b/c, \
++    && eval 'test $(( 1 + 1 )) -eq 2 \
++    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++  && xsi_shell=yes
++AC_MSG_RESULT([$xsi_shell])
++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
++
++AC_MSG_CHECKING([whether the shell understands "+="])
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
++    >/dev/null 2>&1 \
++  && lt_shell_append=yes
++AC_MSG_RESULT([$lt_shell_append])
++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
++
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++  lt_unset=unset
++else
++  lt_unset=false
++fi
++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
++
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++  lt_SP2NL='tr \040 \012'
++  lt_NL2SP='tr \015\012 \040\040'
++  ;;
++ *) # EBCDIC based system
++  lt_SP2NL='tr \100 \n'
++  lt_NL2SP='tr \r\n \100\100'
++  ;;
++esac
++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
++])# _LT_CHECK_SHELL_FEATURES
++
++
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++  && mv -f "$cfgfile.tmp" "$cfgfile" \
++    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
++
++
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++    case ${1} in
++      */*) func_dirname_result="${1%/*}${2}" ;;
++      *  ) func_dirname_result="${3}" ;;
++    esac])
++
++  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++    func_basename_result="${1##*/}"])
++
++  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++    case ${1} in
++      */*) func_dirname_result="${1%/*}${2}" ;;
++      *  ) func_dirname_result="${3}" ;;
++    esac
++    func_basename_result="${1##*/}"])
++
++  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++    # positional parameters, so assign one to ordinary parameter first.
++    func_stripname_result=${3}
++    func_stripname_result=${func_stripname_result#"${1}"}
++    func_stripname_result=${func_stripname_result%"${2}"}])
++
++  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++    func_split_long_opt_name=${1%%=*}
++    func_split_long_opt_arg=${1#*=}])
++
++  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++    func_split_short_opt_arg=${1#??}
++    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
++
++  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++    case ${1} in
++      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++      *)    func_lo2o_result=${1} ;;
++    esac])
++
++  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
++
++  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
++
++  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
++fi
++
++if test x"$lt_shell_append" = xyes; then
++  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
++
++  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++    func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
++
++  # Save a `func_append' function call where possible by direct use of '+='
++  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++    && mv -f "$cfgfile.tmp" "$cfgfile" \
++      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++  test 0 -eq $? || _lt_function_replace_fail=:
++else
++  # Save a `func_append' function call even when '+=' is not available
++  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++    && mv -f "$cfgfile.tmp" "$cfgfile" \
++      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++  test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
++
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++  *-*-mingw* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++        ;;
++      *-*-cygwin* )
++        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++        ;;
++      * ) # otherwise, assume *nix
++        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++        ;;
++    esac
++    ;;
++  *-*-cygwin* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++        ;;
++      *-*-cygwin* )
++        lt_cv_to_host_file_cmd=func_convert_file_noop
++        ;;
++      * ) # otherwise, assume *nix
++        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++        ;;
++    esac
++    ;;
++  * ) # unhandled hosts (and "normal" native builds)
++    lt_cv_to_host_file_cmd=func_convert_file_noop
++    ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++         [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++  *-*-mingw* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++        ;;
++    esac
++    ;;
++esac
++])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++         [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+diff -uNr a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
+--- a/m4/lt~obsolete.m4	1969-12-31 19:00:00.000000000 -0500
++++ b/m4/lt~obsolete.m4	2012-06-11 18:20:43.000000000 -0400
+@@ -0,0 +1,98 @@
++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
++#
++#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
++#   Written by Scott James Remnant, 2004.
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 5 lt~obsolete.m4
++
++# These exist entirely to fool aclocal when bootstrapping libtool.
++#
++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
++# which have later been changed to m4_define as they aren't part of the
++# exported API, or moved to Autoconf or Automake where they belong.
++#
++# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
++# using a macro with the same name in our local m4/libtool.m4 it'll
++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
++# and doesn't know about Autoconf macros at all.)
++#
++# So we provide this file, which has a silly filename so it's always
++# included after everything else.  This provides aclocal with the
++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
++# because those macros already exist, or will be overwritten later.
++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
++#
++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
++# Yes, that means every name once taken will need to remain here until
++# we give up compatibility with versions before 1.7, at which point
++# we need to keep only those names which we still refer to.
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
++
++m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
++m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
++m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
++m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
++m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
++m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
++m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
++m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
++m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
++m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
++m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
++m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
++m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
++m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
++m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
++m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
++m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
++m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
++m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
++m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
++m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
++m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
++m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
++m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
++m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
++m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
++m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
++m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
++m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
++m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
++m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
++m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
++m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
+diff -uNr a/m4/ltoptions.m4 b/m4/ltoptions.m4
+--- a/m4/ltoptions.m4	1969-12-31 19:00:00.000000000 -0500
++++ b/m4/ltoptions.m4	2012-06-11 18:20:43.000000000 -0400
+@@ -0,0 +1,384 @@
++# Helper functions for option handling.                    -*- Autoconf -*-
++#
++#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++#   Inc.
++#   Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 7 ltoptions.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
++
++
++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
++# ------------------------------------------
++m4_define([_LT_MANGLE_OPTION],
++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
++
++
++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
++# ---------------------------------------
++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
++# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
++# saved as a flag.
++m4_define([_LT_SET_OPTION],
++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
++        _LT_MANGLE_DEFUN([$1], [$2]),
++    [m4_warning([Unknown $1 option `$2'])])[]dnl
++])
++
++
++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
++# ------------------------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++m4_define([_LT_IF_OPTION],
++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
++
++
++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
++# -------------------------------------------------------
++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
++# are set.
++m4_define([_LT_UNLESS_OPTIONS],
++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
++		      [m4_define([$0_found])])])[]dnl
++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
++])[]dnl
++])
++
++
++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
++# ----------------------------------------
++# OPTION-LIST is a space-separated list of Libtool options associated
++# with MACRO-NAME.  If any OPTION has a matching handler declared with
++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
++# the unknown option and exit.
++m4_defun([_LT_SET_OPTIONS],
++[# Set options
++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++    [_LT_SET_OPTION([$1], _LT_Option)])
++
++m4_if([$1],[LT_INIT],[
++  dnl
++  dnl Simply set some default values (i.e off) if boolean options were not
++  dnl specified:
++  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
++  ])
++  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
++  ])
++  dnl
++  dnl If no reference was made to various pairs of opposing options, then
++  dnl we run the default mode handler for the pair.  For example, if neither
++  dnl `shared' nor `disable-shared' was passed, we enable building of shared
++  dnl archives by default:
++  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
++  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
++  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
++  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
++  		   [_LT_ENABLE_FAST_INSTALL])
++  ])
++])# _LT_SET_OPTIONS
++
++
++## --------------------------------- ##
++## Macros to handle LT_INIT options. ##
++## --------------------------------- ##
++
++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
++# -----------------------------------------
++m4_define([_LT_MANGLE_DEFUN],
++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
++
++
++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
++# -----------------------------------------------
++m4_define([LT_OPTION_DEFINE],
++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
++])# LT_OPTION_DEFINE
++
++
++# dlopen
++# ------
++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
++])
++
++AU_DEFUN([AC_LIBTOOL_DLOPEN],
++[_LT_SET_OPTION([LT_INIT], [dlopen])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `dlopen' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
++
++
++# win32-dll
++# ---------
++# Declare package support for building win32 dll's.
++LT_OPTION_DEFINE([LT_INIT], [win32-dll],
++[enable_win32_dll=yes
++
++case $host in
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
++  AC_CHECK_TOOL(AS, as, false)
++  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++  AC_CHECK_TOOL(OBJDUMP, objdump, false)
++  ;;
++esac
++
++test -z "$AS" && AS=as
++_LT_DECL([], [AS],      [1], [Assembler program])dnl
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
++
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
++])# win32-dll
++
++AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++_LT_SET_OPTION([LT_INIT], [win32-dll])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `win32-dll' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
++
++
++# _LT_ENABLE_SHARED([DEFAULT])
++# ----------------------------
++# implement the --enable-shared flag, and supports the `shared' and
++# `disable-shared' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_SHARED],
++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([shared],
++    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_shared=yes ;;
++    no) enable_shared=no ;;
++    *)
++      enable_shared=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_shared=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
++
++    _LT_DECL([build_libtool_libs], [enable_shared], [0],
++	[Whether or not to build shared libraries])
++])# _LT_ENABLE_SHARED
++
++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
++])
++
++AC_DEFUN([AC_DISABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], [disable-shared])
++])
++
++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_SHARED], [])
++dnl AC_DEFUN([AM_DISABLE_SHARED], [])
++
++
++
++# _LT_ENABLE_STATIC([DEFAULT])
++# ----------------------------
++# implement the --enable-static flag, and support the `static' and
++# `disable-static' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_STATIC],
++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([static],
++    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_static=yes ;;
++    no) enable_static=no ;;
++    *)
++     enable_static=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_static=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
++
++    _LT_DECL([build_old_libs], [enable_static], [0],
++	[Whether or not to build static libraries])
++])# _LT_ENABLE_STATIC
++
++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
++])
++
++AC_DEFUN([AC_DISABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], [disable-static])
++])
++
++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_STATIC], [])
++dnl AC_DEFUN([AM_DISABLE_STATIC], [])
++
++
++
++# _LT_ENABLE_FAST_INSTALL([DEFAULT])
++# ----------------------------------
++# implement the --enable-fast-install flag, and support the `fast-install'
++# and `disable-fast-install' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_FAST_INSTALL],
++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([fast-install],
++    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_fast_install=yes ;;
++    no) enable_fast_install=no ;;
++    *)
++      enable_fast_install=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_fast_install=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
++
++_LT_DECL([fast_install], [enable_fast_install], [0],
++	 [Whether or not to optimize for fast installation])dnl
++])# _LT_ENABLE_FAST_INSTALL
++
++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
++
++# Old names:
++AU_DEFUN([AC_ENABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `fast-install' option into LT_INIT's first parameter.])
++])
++
++AU_DEFUN([AC_DISABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `disable-fast-install' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
++
++
++# _LT_WITH_PIC([MODE])
++# --------------------
++# implement the --with-pic flag, and support the `pic-only' and `no-pic'
++# LT_INIT options.
++# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
++m4_define([_LT_WITH_PIC],
++[AC_ARG_WITH([pic],
++    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
++	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++    [lt_p=${PACKAGE-default}
++    case $withval in
++    yes|no) pic_mode=$withval ;;
++    *)
++      pic_mode=default
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for lt_pkg in $withval; do
++	IFS="$lt_save_ifs"
++	if test "X$lt_pkg" = "X$lt_p"; then
++	  pic_mode=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [pic_mode=default])
++
++test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
++
++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
++])# _LT_WITH_PIC
++
++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
++
++# Old name:
++AU_DEFUN([AC_LIBTOOL_PICMODE],
++[_LT_SET_OPTION([LT_INIT], [pic-only])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `pic-only' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
++
++## ----------------- ##
++## LTDL_INIT Options ##
++## ----------------- ##
++
++m4_define([_LTDL_MODE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
++		 [m4_define([_LTDL_MODE], [nonrecursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [recursive],
++		 [m4_define([_LTDL_MODE], [recursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [subproject],
++		 [m4_define([_LTDL_MODE], [subproject])])
++
++m4_define([_LTDL_TYPE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [installable],
++		 [m4_define([_LTDL_TYPE], [installable])])
++LT_OPTION_DEFINE([LTDL_INIT], [convenience],
++		 [m4_define([_LTDL_TYPE], [convenience])])
+diff -uNr a/m4/ltsugar.m4 b/m4/ltsugar.m4
+--- a/m4/ltsugar.m4	1969-12-31 19:00:00.000000000 -0500
++++ b/m4/ltsugar.m4	2012-06-11 18:20:43.000000000 -0400
+@@ -0,0 +1,123 @@
++# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 6 ltsugar.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
++
++
++# lt_join(SEP, ARG1, [ARG2...])
++# -----------------------------
++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
++# associated separator.
++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
++# versions in m4sugar had bugs.
++m4_define([lt_join],
++[m4_if([$#], [1], [],
++       [$#], [2], [[$2]],
++       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
++m4_define([_lt_join],
++[m4_if([$#$2], [2], [],
++       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
++
++
++# lt_car(LIST)
++# lt_cdr(LIST)
++# ------------
++# Manipulate m4 lists.
++# These macros are necessary as long as will still need to support
++# Autoconf-2.59 which quotes differently.
++m4_define([lt_car], [[$1]])
++m4_define([lt_cdr],
++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
++       [$#], 1, [],
++       [m4_dquote(m4_shift($@))])])
++m4_define([lt_unquote], $1)
++
++
++# lt_append(MACRO-NAME, STRING, [SEPARATOR])
++# ------------------------------------------
++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
++# Note that neither SEPARATOR nor STRING are expanded; they are appended
++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
++# No SEPARATOR is output if MACRO-NAME was previously undefined (different
++# than defined and empty).
++#
++# This macro is needed until we can rely on Autoconf 2.62, since earlier
++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
++m4_define([lt_append],
++[m4_define([$1],
++	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
++
++
++
++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
++# ----------------------------------------------------------
++# Produce a SEP delimited list of all paired combinations of elements of
++# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
++# has the form PREFIXmINFIXSUFFIXn.
++# Needed until we can rely on m4_combine added in Autoconf 2.62.
++m4_define([lt_combine],
++[m4_if(m4_eval([$# > 3]), [1],
++       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
++[[m4_foreach([_Lt_prefix], [$2],
++	     [m4_foreach([_Lt_suffix],
++		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
++	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
++
++
++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
++# -----------------------------------------------------------------------
++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
++m4_define([lt_if_append_uniq],
++[m4_ifdef([$1],
++	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
++		 [lt_append([$1], [$2], [$3])$4],
++		 [$5])],
++	  [lt_append([$1], [$2], [$3])$4])])
++
++
++# lt_dict_add(DICT, KEY, VALUE)
++# -----------------------------
++m4_define([lt_dict_add],
++[m4_define([$1($2)], [$3])])
++
++
++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
++# --------------------------------------------
++m4_define([lt_dict_add_subkey],
++[m4_define([$1($2:$3)], [$4])])
++
++
++# lt_dict_fetch(DICT, KEY, [SUBKEY])
++# ----------------------------------
++m4_define([lt_dict_fetch],
++[m4_ifval([$3],
++	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
++    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
++
++
++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
++# -----------------------------------------------------------------
++m4_define([lt_if_dict_fetch],
++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
++	[$5],
++    [$6])])
++
++
++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
++# --------------------------------------------------------------
++m4_define([lt_dict_filter],
++[m4_if([$5], [], [],
++  [lt_join(m4_quote(m4_default([$4], [[, ]])),
++           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
++		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
++])
+diff -uNr a/m4/ltversion.m4 b/m4/ltversion.m4
+--- a/m4/ltversion.m4	1969-12-31 19:00:00.000000000 -0500
++++ b/m4/ltversion.m4	2012-06-11 18:20:43.000000000 -0400
+@@ -0,0 +1,23 @@
++# ltversion.m4 -- version numbers			-*- Autoconf -*-
++#
++#   Copyright (C) 2004 Free Software Foundation, Inc.
++#   Written by Scott James Remnant, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# @configure_input@
++
++# serial 3337 ltversion.m4
++# This file is part of GNU Libtool
++
++m4_define([LT_PACKAGE_VERSION], [2.4.2])
++m4_define([LT_PACKAGE_REVISION], [1.3337])
++
++AC_DEFUN([LTVERSION_VERSION],
++[macro_version='2.4.2'
++macro_revision='1.3337'
++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
++_LT_DECL(, macro_revision, 0)
++])
+diff -uNr a/Makefile.am b/Makefile.am
+--- a/Makefile.am	2007-01-19 16:43:14.000000000 -0500
++++ b/Makefile.am	2012-12-11 15:25:06.679589040 -0500
+@@ -57,6 +57,7 @@
+ # __END_OF_JASPER_LICENSE__
+ 
+ AUTOMAKE_OPTIONS = foreign dist-zip dist-tarZ
++ACLOCAL_AMFLAGS = -I m4
+ 
+ EXTRA_DIST = README INSTALL COPYRIGHT LICENSE NEWS ChangeLog data doc \
+   jasper.spec.in jasper.spec acaux
+diff -uNr a/src/appl/Makefile.am b/src/appl/Makefile.am
+--- a/src/appl/Makefile.am	2007-01-19 16:43:08.000000000 -0500
++++ b/src/appl/Makefile.am	2012-12-11 15:15:55.114635974 -0500
+@@ -78,7 +78,7 @@
+ man_MANS = imgcmp.1 imginfo.1 jasper.1 jiv.1
+ EXTRA_DIST = $(man_MANS)
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+ 
+ MYLDFLAGS = ../libjasper/libjasper.la
+ jasper_LDADD = $(MYLDFLAGS)
+diff -uNr a/src/libjasper/base/Makefile.am b/src/libjasper/base/Makefile.am
+--- a/src/libjasper/base/Makefile.am	2007-01-19 16:43:05.000000000 -0500
++++ b/src/libjasper/base/Makefile.am	2012-12-11 15:17:52.470591243 -0500
+@@ -73,4 +73,4 @@
+ 	jas_tvp.c \
+ 	jas_version.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/bmp/Makefile.am b/src/libjasper/bmp/Makefile.am
+--- a/src/libjasper/bmp/Makefile.am	2007-01-19 16:43:07.000000000 -0500
++++ b/src/libjasper/bmp/Makefile.am	2012-12-11 15:17:48.414731405 -0500
+@@ -64,4 +64,4 @@
+ 	bmp_dec.c \
+ 	bmp_enc.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/jp2/Makefile.am b/src/libjasper/jp2/Makefile.am
+--- a/src/libjasper/jp2/Makefile.am	2007-01-19 16:43:05.000000000 -0500
++++ b/src/libjasper/jp2/Makefile.am	2012-12-11 15:17:40.251013526 -0500
+@@ -64,4 +64,4 @@
+ 	jp2_dec.c \
+ 	jp2_enc.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/jpc/Makefile.am b/src/libjasper/jpc/Makefile.am
+--- a/src/libjasper/jpc/Makefile.am	2007-01-19 16:43:07.000000000 -0500
++++ b/src/libjasper/jpc/Makefile.am	2012-12-11 15:17:36.155155071 -0500
+@@ -102,4 +102,4 @@
+ 	jpc_t2enc.c \
+ 	jpc_util.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/jpg/Makefile.am b/src/libjasper/jpg/Makefile.am
+--- a/src/libjasper/jpg/Makefile.am	2007-01-19 16:43:04.000000000 -0500
++++ b/src/libjasper/jpg/Makefile.am	2012-12-11 15:17:30.163362137 -0500
+@@ -76,4 +76,4 @@
+ 	jpg_enc.c \
+ 	jpg_dummy.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/Makefile.am b/src/libjasper/Makefile.am
+--- a/src/libjasper/Makefile.am	2007-01-19 16:43:07.000000000 -0500
++++ b/src/libjasper/Makefile.am	2012-12-11 15:34:15.788625021 -0500
+@@ -85,5 +85,6 @@
+ 
+ # -release $(LT_RELEASE)
+ libjasper_la_LDFLAGS = \
++	-no-undefined \
+ 	-version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
+ 
+diff -uNr a/src/libjasper/Makefile.am~ b/src/libjasper/Makefile.am~
+--- a/src/libjasper/Makefile.am~	1969-12-31 19:00:00.000000000 -0500
++++ b/src/libjasper/Makefile.am~	2007-01-19 16:43:07.000000000 -0500
+@@ -0,0 +1,89 @@
++# Copyright (c) 2001-2002 Michael David Adams.
++# All rights reserved. 
++
++# __START_OF_JASPER_LICENSE__
++# 
++# JasPer License Version 2.0
++# 
++# Copyright (c) 2001-2006 Michael David Adams
++# Copyright (c) 1999-2000 Image Power, Inc.
++# Copyright (c) 1999-2000 The University of British Columbia
++# 
++# All rights reserved.
++# 
++# Permission is hereby granted, free of charge, to any person (the
++# "User") obtaining a copy of this software and associated documentation
++# files (the "Software"), to deal in the Software without restriction,
++# including without limitation the rights to use, copy, modify, merge,
++# publish, distribute, and/or sell copies of the Software, and to permit
++# persons to whom the Software is furnished to do so, subject to the
++# following conditions:
++# 
++# 1.  The above copyright notices and this permission notice (which
++# includes the disclaimer below) shall be included in all copies or
++# substantial portions of the Software.
++# 
++# 2.  The name of a copyright holder shall not be used to endorse or
++# promote products derived from the Software without specific prior
++# written permission.
++# 
++# THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS
++# LICENSE.  NO USE OF THE SOFTWARE IS AUTHORIZED HEREUNDER EXCEPT UNDER
++# THIS DISCLAIMER.  THE SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
++# "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
++# BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
++# PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.  IN NO
++# EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
++# INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
++# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
++# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
++# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  NO ASSURANCES ARE
++# PROVIDED BY THE COPYRIGHT HOLDERS THAT THE SOFTWARE DOES NOT INFRINGE
++# THE PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF ANY OTHER ENTITY.
++# EACH COPYRIGHT HOLDER DISCLAIMS ANY LIABILITY TO THE USER FOR CLAIMS
++# BROUGHT BY ANY OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL
++# PROPERTY RIGHTS OR OTHERWISE.  AS A CONDITION TO EXERCISING THE RIGHTS
++# GRANTED HEREUNDER, EACH USER HEREBY ASSUMES SOLE RESPONSIBILITY TO SECURE
++# ANY OTHER INTELLECTUAL PROPERTY RIGHTS NEEDED, IF ANY.  THE SOFTWARE
++# IS NOT FAULT-TOLERANT AND IS NOT INTENDED FOR USE IN MISSION-CRITICAL
++# SYSTEMS, SUCH AS THOSE USED IN THE OPERATION OF NUCLEAR FACILITIES,
++# AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL
++# SYSTEMS, DIRECT LIFE SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH
++# THE FAILURE OF THE SOFTWARE OR SYSTEM COULD LEAD DIRECTLY TO DEATH,
++# PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH
++# RISK ACTIVITIES").  THE COPYRIGHT HOLDERS SPECIFICALLY DISCLAIM ANY
++# EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
++# 
++# __END_OF_JASPER_LICENSE__
++
++EXTRA_DIST = README
++
++SUBDIRS = \
++	include \
++	base \
++	bmp \
++	jp2 \
++	jpc \
++	jpg \
++	mif \
++	pgx \
++	pnm \
++	ras
++
++lib_LTLIBRARIES = libjasper.la
++libjasper_la_SOURCES = dummy.c
++libjasper_la_LIBADD = \
++	base/libbase.la \
++	bmp/libbmp.la \
++	jp2/libjp2.la \
++	jpc/libjpc.la \
++	jpg/libjpg.la \
++	mif/libmif.la \
++	pgx/libpgx.la \
++	pnm/libpnm.la \
++	ras/libras.la
++
++# -release $(LT_RELEASE)
++libjasper_la_LDFLAGS = \
++	-version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
++
+diff -uNr a/src/libjasper/mif/Makefile.am b/src/libjasper/mif/Makefile.am
+--- a/src/libjasper/mif/Makefile.am	2007-01-19 16:43:05.000000000 -0500
++++ b/src/libjasper/mif/Makefile.am	2012-12-11 15:17:25.363528012 -0500
+@@ -63,4 +63,4 @@
+ 	mif_cod.h \
+ 	mif_cod.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/pgx/Makefile.am b/src/libjasper/pgx/Makefile.am
+--- a/src/libjasper/pgx/Makefile.am	2007-01-19 16:43:07.000000000 -0500
++++ b/src/libjasper/pgx/Makefile.am	2012-12-11 15:17:21.135674121 -0500
+@@ -64,4 +64,4 @@
+ 	pgx_dec.c \
+ 	pgx_enc.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/pnm/Makefile.am b/src/libjasper/pnm/Makefile.am
+--- a/src/libjasper/pnm/Makefile.am	2007-01-19 16:43:05.000000000 -0500
++++ b/src/libjasper/pnm/Makefile.am	2012-12-11 15:17:15.823857691 -0500
+@@ -64,4 +64,4 @@
+ 	pnm_dec.c \
+ 	pnm_enc.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include
+diff -uNr a/src/libjasper/ras/Makefile.am b/src/libjasper/ras/Makefile.am
+--- a/src/libjasper/ras/Makefile.am	2007-01-19 16:43:04.000000000 -0500
++++ b/src/libjasper/ras/Makefile.am	2012-12-11 15:17:11.232016381 -0500
+@@ -64,4 +64,4 @@
+ 	ras_dec.c \
+ 	ras_enc.c
+ 
+-INCLUDES = -I$(top_srcdir)/src/libjasper/include
++AM_CPPFLAGS = -I$(top_srcdir)/src/libjasper/include