Mercurial > hg > mercurial-source
view tests/test-exchange-obsmarkers-case-B4.t @ 36602:f6ca1e11d8b4 stable
revset: evaluate filesets against each revision for 'file()' (issue5778)
After f2aeff8a87b6, the fileset was evaluated to a set of files against the
working directory, and then those files were applied against each revision. The
result was nonsense. For example, `hg log -r 'file("set:exec()")'` on the
Mercurial repo listed revision 0 because it has the `hg` script, which is
currently +x. But that bit wasn't applied until revision 280 (which
'contains()' properly indicates).
This technique was borrowed from checkstatus(), which services adds(),
modifies(), and removes(), so it seems safe enough. The 'r:' case is explicitly
assigned to wdirrev, freeing up rev=None to mean "re-evaluate at each revision".
The distinction is important to avoid behavior changes with `hg log set:...`
(test-largefiles-misc.t and test-fileset-generated.t drop current log output
without this). I'm not sure what the right behavior for that is (1fd352aa08fc
explicitly enabled this behavior for graphlog), but the day before the release
isn't the time to experiment.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sun, 28 Jan 2018 14:08:59 -0500 |
parents | 4a4fa665e1b4 |
children |
line wrap: on
line source
============================================ Testing obsolescence markers push: Cases B.4 ============================================ Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of all changesets that requested to be "in sync" after the push (even if they are already on both side). This test belongs to a series of tests checking such set is properly computed and applied. This does not tests "obsmarkers" discovery capabilities. Category B: pruning case TestCase 4: Pruned changeset on common part of the history Variants: # a: explicite push # b: bare push B.4 Pruned changeset on common part of history ============================================= .. {{{ .. ⊗ C .. | ● B .. | | .. | ● A .. |/ .. ● O .. }}} .. .. Marker exist from: .. .. * C (prune) .. .. Command run: .. .. * hg push -r B .. * hg push .. .. Expected exchange: .. .. * prune for C Setup ----- $ . $TESTDIR/testlib/exchange-obsmarker-util.sh initial $ setuprepos B.4 creating test repo for test case B.4 - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A $ mkcommit B $ hg phase --public . $ hg push ../pushdest pushing to ../pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 2 changesets with 2 changes to 2 files $ hg push ../pulldest pushing to ../pulldest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 2 changesets with 2 changes to 2 files $ hg update -q 0 $ mkcommit C created new head $ hg prune -qd '0 0' . $ hg log -G --hidden x 7f7f229b13a6 (draft): C | | o f6fbb35d8ac9 (public): B | | | o f5bc6836db60 (public): A |/ @ a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. $ cp -R B.4 B.4.a $ cp -R B.4 B.4.b Actual Test (explicit push version) ----------------------------------- $ dotest B.4.a O ## Running testcase B.4.a # testing echange of "O" (a9bdc8b26820) ## initial state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "O" from main to pushdest pushing to pushdest searching for changes no changes found remote: 1 new obsolescence markers ## post push state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "a9bdc8b26820" from main into pulldest pulling from main no changes found 1 new obsolescence markers ## post pull state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} Actual Test (bare push version) ----------------------------------- $ dotest B.4.b ## Running testcase B.4.b ## initial state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing from main to pushdest pushing to pushdest searching for changes no changes found remote: 1 new obsolescence markers ## post push state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling from main into pulldest pulling from main searching for changes no changes found 1 new obsolescence markers ## post pull state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}